Im not very experienced in Android Devolping , I only have some basic knowledge. I flashed b506 today in order to check out the new-beta rom. When i tried to rollback to b305 and then back to stable version b316 i faced some issues and the prosses kept failing. I tried to flash via Multi-Tool recovery for the stable version, and that is when i bricked my phone. At first I only had bootloops so I thought it was a good idea to unbrick the phone via multi-tool but i can't get in recovery mode in order to complete the procedure. At the moment im stuck at boot screen. I only can get in fastboot mode. Is there any way to get out from this situation or is my phone hard-bricked and there is nothing that can be done?
My version is H60-L02.
Related
Hey everyone I'm quite new to android, and I'm currently stuck in Download Mode after trying and failing to install Twrp 2.7
I was previously rooted, tried to install Twrp via Autorec, however when I ran the app it soft-bricked my phone and put me into Fastboot mode.
I followed http://forum.xda-developers.com/showthread.php?t=2476972 method, and got back to Download Mode.
I am currently in the middle of returning to stock through http://forum.xda-developers.com/showthread.php?t=2432476 using the .TOT method.
I'm fairly close to repairing it but my only issue is that I cannot get my computer to recognize my phone. Neither in Device management nor adb devices anymore.
Therefore I cannot change the port to COM 41 to flash the .TOT file.
I constantly tried installing drivers for the phone both 3.10 and 3.08 but still no recognition can anybody help?
Some more info about the phone:
it's the D801 variant but its on Wind (Canada) not T-mobile
it was previously rooted
it did not have any recovery software installed
no roms had been flashed previously.
I was trying to convert my honor 6 back to stock. I'm not sure what version I had installed, just that it was EMUI 3.0. I tried using the Honor 6 tool unbrick method to reinstall the boot.img, cust.img, recovery.img and system.img from B316, however this has got my honor 6 stuck in a boot loop.
I've consequently tried using the unbrick method on loads of other versions of the 3.0 rom with no success.
Can anyone give me or point me to an idiots guide to unbricking? I am able to get in to fastboot, but that's it.
willmott1992 said:
I was trying to convert my honor 6 back to stock. I'm not sure what version I had installed, just that it was EMUI 3.0. I tried using the Honor 6 tool unbrick method to reinstall the boot.img, cust.img, recovery.img and system.img from B316, however this has got my honor 6 stuck in a boot loop.
I've consequently tried using the unbrick method on loads of other versions of the 3.0 rom with no success.
Can anyone give me or point me to an idiots guide to unbricking? I am able to get in to fastboot, but that's it.
Click to expand...
Click to collapse
After trying around 15 different roms, it turned out that I had B608 installed, so updating with that finally unbricked me
Hello everyone,
I've honor 6 L12 rooted, unlocked bootloader as I can see in fast boot and multi tool, I've installed TWRP recovery.
I just made a backup through TWRP saved in internal SD storage, and try to install but since that try, I hade problem like model changed to L01 and my version is ending with B000
Also the shape and look (of firmware and theme), have been changed.
I don't know what happened and why!
I tried to to restore custom rom and recovery but couldn't.
Now I can't use recovery mod because it's giving me this: Error!
Function No : (Func_Boot_RECOVERY)
Error No : 2
I've tried to use multi tool giving me error with any writing to device:
Faild remote command not allowed
Note: I'm still able to access normal mod, but it's hard, I've to try ton of times pressing buttons to boot to normal mod.
Please any help dears.
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
ALHARTHI6 said:
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
Click to expand...
Click to collapse
Which firmware you were on before issue?
No I didn't
As I said trying to restore my backup through TWRP but was in internal SD., that's it.
My real model is L12.
Version, I don't remember but it was on android 5.1.1 EMUI 3.1
Now I just used Sd method and recover device with last 4.0.1 EMUI for devolvers, but no Arabic language.
How to go to another firmware?
What is the best, satable one for my device?
And is there a good custom stable rom, especially if android 7 ?
Please full answer if available
Thanks again
I have a Honor 6 Plus PE-TL10 running Android M. i bought the phone from Japan so probably the stock OS was Lollipop chinese or Japanese variant (not sure). Since there was no upgrade available to marshmallow in original OS I downloaded Indian upgrade file and locally upgraded my phone to Android M india. The phone was running smooth and fine for almost one year but wasnt rooted. So i flashed TWRP 3.0.2 successfully and then tried to flash SuperSU.zip meant for my phone but it failed and phone got stuck in bootloop. Then with no option left i tried to flash stock rom by extracting System, Boot, Recovery.zip from upgrade folder using huawei upgrade extractor and flashing through fastboot. The flash failed and now it just gets stuck on huawei logo right before the booting starts. So I think it aint even on bootloop. Its probably bricked. I cant enter into fastboot or recovery as its not taking any volume+Power key commands. I waited so that the battery drains out and i charged again but still nothing changed. The service center refused to fix it as it is not bought in India.
P.S i think the flash failed cause i tried to flash Indian Rom instead of original Chinese?Japanese?what-so-ever Rom.
Please help. What shall i do?
Thanks
Hi guys, i need your help!
i will try to explain the situation at my best.
A couple of days ago i decided to go back from a custom ROM to the Stock one via TWRP flash and i ended up with a soft brick, later i managed to flash the stock rom with SP Flash tool.
Yesterday i tried to get ROOT access on the fresh installed stock rom and considering that i wasn't able to get ADB and Fastboot to work properly on my pc (at the time) i used King Root, after that i tried to install TWRP through the official app, the result was not successful (the problem was the locked bootloader) and i found myself without recovery (neither TWRP or Stock).
Here comes the last part (the tricky one)
after all this mess I managed to get ADB and Fastboot to work and i obviously tried to unlock the bootloader, unfortunatly i hit "boot to recovery" and now i'm stuck with a boot loop with no recovery.
if i try to get to fastboot with Vol down+Power the phone shows the LeEco Logo and then the screen shuts down.
Sp Flash tools doesn't work either.
Any possible solution?
The thing u got wrong is that... U should have flashed twrp on either eui 5.8.17s or 5.8.19s...
Don't flash it on 14s or lower eui version ... It might get stuck on bootloop