Related
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
The very first thing you have to do is to unlock your bootloader if you want root.
It's not possible for Moto G3 I think..
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
i also have same problm plz help....
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
I am having the problem with link2sd app whenever I tried to integrate any app into system and reboot my device it completely remove that app from the device ......why its happening
Yousvel said:
The very first thing you have to do is to unlock your bootloader if you want root.
Click to expand...
Click to collapse
Ok.. I know about the whole process of rooting the MOTO G3 is .
I am asking if the SystemLess Root is working on MOTO G3 Marshmallow Update
I have seen some posts where MOTO G3 users have used the SystemLess Root on Lollipop.
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the Reply.
You weren't clear about whats working great.
Rooted MOTO G3 Marshmallow or SystemLess Root as It is also SuperSu v2.62
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Dom3616 said:
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Xt1550 2gb
Android 6.0
2.8.7.0 r5
supersu 2.62 flashable zip
All links are on xda search them
Sent from my MotoG3 using Tapatalk
sbsharma said:
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
Click to expand...
Click to collapse
Thanks For the Reply.
I asked two questions and you replied only to one or to Both.
It confused me.
But Thanks for the HELP.
My xender app does not work after this system update can u plss tell me y???? And wt is the soln
Dom3616 said:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Agree. And the procedures need to fill all the gaps of info that currently exist. For example, after unlocking bootloader, it would have been helpful to know that you need to reboot and let the system rebuild itself (which takes several minutes) before moving on to anything else such booting/flashing TWRP & rooting.
adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
First of all, Systemless Root is Available for MOTO G 3RD GEN.. Just Grab the zip.. No other zip will work except BETA-SuperSU-v2.62-3-20151211162651.zip..
Rooting moto g3 marshmallow
Can Anyone Provide me twrp recovery and systemless supersu for moto g3 marshmallow?
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Persechini said:
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Click to expand...
Click to collapse
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
gregferns said:
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
Click to expand...
Click to collapse
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
acejavelin said:
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
Click to expand...
Click to collapse
I never do auto rooting... I always follow the guides for any phone.... I was just enquiring of him if he had done it that way ????
As to your 2nd point I had done a TWRP of my stock rom for the merlin,,, and then like a dumbass i had kept it on my sd card (64gb ) which suddenly decided to die on me.... so i lost that...
Anyway,, when i try to put back my MOTO GTE to stock, i will flash the firmware and then try the systemless root,,, have never done that before..
thanks for the stepby step guide..
cheers
Greg
In January I installed SuperSU 2.6.2-3 in accordance with this forum. Interestingly, today I received notification from the Playstore to update SuperSU to 2.65 (dtd Feb 01, 2016). I don't know why I received this notification from the Playstore since I did not install from there and did not receive this notification much earlier. Also, I assume updating to 2.65 through the Playstore would not be a good idea.
Chainfire has recently decided that SuperSU 2.65 was Stable. Only Stable versions get pushed to the Play Store, so that's why you got an update. I believe it will be safe to install, but be sure to make a backup via TWRP first.
Funcionando en Moto g 2015 xt1543 México [MM]
Probé la actualización y todo bien ? OK
TVD1903 said:
Chainfire has recently decided that SuperSU 2.65 was Stable. Only Stable versions get pushed to the Play Store, so that's why you got an update. I believe it will be safe to install, but be sure to make a backup via TWRP first.
Click to expand...
Click to collapse
But my first SuperSU flash was 2.65. And like many others on this forum who did the same, this version soft bricked my phone (stuck on unlocked boot loader screen). Are you saying 2.65 is safe to install on top of 2.6.2-3 but not safe as an initial install?
MrTooPhone said:
But my first SuperSU flash was 2.65. And like many others on this forum who did the same, this version soft bricked my phone (stuck on unlocked boot loader screen). Are you saying 2.65 is safe to install on top of 2.6.2-3 but not safe as an initial install?
Click to expand...
Click to collapse
I think so yes, as the new version was designed as a version to be compatible with every version of Android an to be installed over older versions. Do make a backup though, and if you are afraid, just don't do it. It won't hurt to stay on an older version for a while. You can install the update to the app because that will not immediately install the actual SuperSU update. Do not accept the prompt when opening the app for updating the binary in that case though.
TVD1903 said:
I think so yes, as the new version was designed as a version to be compatible with every version of Android an to be installed over older versions. Do make a backup though, and if you are afraid, just don't do it. It won't hurt to stay on an older version for a while. You can install the update to the app because that will not immediately install the actual SuperSU update. Do not accept the prompt when opening the app for updating the binary in that case though.
Click to expand...
Click to collapse
So what version of SuperSU do you have installed? How did you install that version? On top of a previous version or a fresh TWRP flash?
MrTooPhone said:
So what version of SuperSU do you have installed? How did you install that version? On top of a previous version or a fresh TWRP flash?
Click to expand...
Click to collapse
I am using a Custom ROM with SuperSU built-in. I have however also used the Stock ROM with SuperSU v2.65, installed using TWRP.
Got the same notification, updated fine, updated also su binaries (asked by the app) and - everything works fine. Stock 6.0.
Well I was reluctant to try based on my first experience flashing 2.65. But I accepted the update via Playstore, SuperSU updated the binaries, rebooted, and all is still good.
I would assume all those rooting the G3 MM for the first time should use 2.62-3 then upgrade to 2.65.
MrTooPhone said:
I would assume all those rooting the G3 MM for the first time should use 2.62-3 then upgrade to 2.65.
Click to expand...
Click to collapse
This is how I did mine when following the thread :
[GUIDE] [OSPREY] [MM] Install TWRP, Root and Xposed successfully on 6.0
Installed 2.62-3, then just received the 2.65 from the app store. No problems here either. Not sure about the TWRP update from 2.8.7 r7 to the 3.x.x versions though, but I am getting the impression that due to extensive changes it is not a good idea.
pjc123 said:
This is how I did mine when following the thread :
[GUIDE] [OSPREY] [MM] Install TWRP, Root and Xposed successfully on 6.0
Installed 2.62-3, then just received the 2.65 from the app store. No problems here either. Not sure about the TWRP update from 2.8.7 r7 to the 3.x.x versions though, but I am getting the impression that due to extensive changes it is not a good idea.
Click to expand...
Click to collapse
I have had no issues backing up with twrp-osprey-3.0.0-r2.img. I have not tried restoring yet.
I see there was an update yesterday again from the play store (version 2.79). Has anyone tried it? I am on stock, root, with TWRP (3.0.2-r1). I see I am falling behind on TWRP as well, seeing it is at 3.0.2-r5.
pjc123 said:
I see there was an update yesterday again from the play store (version 2.79). Has anyone tried it? I am on stock, root, with TWRP (3.0.2-r1). I see I am falling behind on TWRP as well, seeing it is at 3.0.2-r5.
Click to expand...
Click to collapse
don'tn worry ... the update works perfectly ...
..::Matr!x::.. said:
don'tn worry ... the update works perfectly ...
Click to expand...
Click to collapse
Thanks.
pjc123 said:
I see there was an update yesterday again from the play store (version 2.79). Has anyone tried it? I am on stock, root, with TWRP (3.0.2-r1). I see I am falling behind on TWRP as well, seeing it is at 3.0.2-r5.
Click to expand...
Click to collapse
I have received several updates since 2.62-3. All have installed from playstore just fine including 2.79. As an initial installation, I think 2.62-3 was the only one that installed as systemless without forcing a systemless installation. Once you have a successful installation, all updates should be as well.
Sorry I'm not able to help you but you can help me. I soft brick my Moto g xt2541 twice due to different super su and wrong recoveries . Can you please provide me links u used to root. My issue is listed here. http://forum.xda-developers.com/2015-moto-g/help/unable-to-root-moto-g-2015-1-gb-model-t3523471 your help is much appriciated
Sent from my MotoG3 using Tapatalk
mirpuri said:
Sorry I'm not able to help you but you can help me. I soft brick my Moto g xt2541 twice due to different super su and wrong recoveries . Can you please provide me links u used to root. My issue is listed here. http://forum.xda-developers.com/2015-moto-g/help/unable-to-root-moto-g-2015-1-gb-model-t3523471 your help is much appriciated
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
I followed these directions eleven months ago for the initial unlock bootloader, TWRP recovery and root, using the versions of SuperSU and TWRP listed, however I did not install Xposed.
http://forum.xda-developers.com/201...twrp-root-xposed-t3294588:confused::confused:
I have since updated to:
SuperSU 2.79
TWRP 3.0.2-r1
Caveat: My phone is a XT1540.
Hello Friends,
I have tried to root my OPO running on cos 13 through TWRP. Unfortunately the rooting failed and the phone failed to start, It hangs in "cyanogen mod ready " boot animation screen. some how I have managed to flash the phone to stock OS and again updated it to COS 13.
Now I would like to root the phone , Please someone provide me the right SUPERSU link !
so that I can use it through TWRP.
P.S: The bootloader is already Unlocked.
Thanks in advance :good:
I'm dealing with the same problem, and I've had to flash the system partition back to 5.1.1 and then upgrade to 6.0.1 3 times. Each time I try installing different versions of SuperSU It hangs. Apparently you aren't supposed to install it, and enable root from the developer options, but I don't have any such option.
srink.007 said:
Hello Friends,
I have tried to root my OPO running on cos 13 through TWRP. Unfortunately the rooting failed and the phone failed to start, It hangs in "cyanogen mod ready " boot animation screen. some how I have managed to flash the phone to stock OS and again updated it to COS 13.
Now I would like to root the phone , Please someone provide me the right SUPERSU link !
so that I can use it through TWRP.
P.S: The bootloader is already Unlocked.
Thanks in advance :good:
Click to expand...
Click to collapse
squigley said:
I'm dealing with the same problem, and I've had to flash the system partition back to 5.1.1 and then upgrade to 6.0.1 3 times. Each time I try installing different versions of SuperSU It hangs. Apparently you aren't supposed to install it, and enable root from the developer options, but I don't have any such option.
Click to expand...
Click to collapse
You need to flash the beta sytemless SU, downloads are at the bottom of this post. Latest is BETA-SuperSU-v2.67-20160121175247.zip - http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Ok, so I found a Beta version of SuperSU 2.7.1, and it seems to have worked. It was a different install process, saying it detected a "systemless root" or something, and it needed to patch the boot image. After that I appear to have root access again..
https://download.chainfire.eu/932/SuperSU/BETA-SuperSU-v2.71-20160331103524.zip
Edit: Whoops, guess I should have refreshed the page before posting.. What you said is correct Ken.
Thank you
kenboyles72 said:
You need to flash the beta sytemless SU, downloads are at the bottom of this post. Latest is BETA-SuperSU-v2.67-20160121175247.zip - http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
thanks a lot
DONE
http://imgur.com/hh3qkdxGuys Finally I have done it. Yes the phone is rooted now
1. Flash Stock COS 12
2.Update Stock COS 13 using stock recovery
3. Installed SUPERSU (chainfire) from Play Store
3. Install TWRP
4. Create NANDROID BACKUP (optional , I have created since I doubted the rooting process on cos 13)
5. Installed Latest STABLE SUPERSU ( V 2.65 as of now) {my last attempt with beta 2.71 failed }
6. Done
http://imgur.com/hh3qkdx
Greetings
Have problem rooting updated nougat for FRD-L09* 360
Have installed twrp 3.0.3 and patch the chainfire's latest root - su files or phh, but still no way to get it rooted.
Feedback if any1 else have the same symptoms and solution.
Thanks.
Regards.
Hi @StratOS_HTC
Nice to see you again (coming from the Core 2)
I have the B380 and rooted it with this prerooted image:
forum.xda-developers.com/honor-8/development/twrp-t3566563/post71274057
Try it with that prerooted boot-image. If it doesn't work try this older prerooted boot-image:
forum.xda-developers.com/honor-8/development/twrp-t3566563/post71272109
Regards,
AnDrOiiiD_YT
pHH's changed boot img and app works flawless ROOT
While CF's changed boot.img cause bootloops / system loops.
While changing the fastboot.img got bricked my phone - Were unable to turn it on, no USB connections possible, donno how the TWRP recovery accidently turned on ... No clue about it.
Got it back.
Need some feedback about CF's root. any1 has sent him a boot img's ?
Looking forward for cf's SU for HONOR ...
Is prerooted really the only way to go? I installed B380 today and thought there was a way to root with SuperSU. Must have misunderstood since the Emui5 version of SuperSU doesnt work for me. It installs just fine but then the app says "no binaries installled"..
It's not the pre-rooted, it's only modified boot image with changed security and other init stuff that the root app can use it.
PHH's is working great, CF's will go on ...
Ok. Which of the two links above did you use?
Edit:
If someone else out there had the same question, I followed the first link and downloaded the rooted boot img provided by @Atarii.
I was on B380, unlocked with TWRP 3.0.3 and flashed the rooted_b378_boot.img via adb. Worked like a charm. Then rooted with phhs superuser from Play store.
Stratos how do i check if my phone is model l09 or something else? My Honor 8 is dual sim that means its the version L19?
Do you know any way to install a working twrp + root l19 on nougat?
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Code:
SYSTEMLESS=true
So the best is to make sure you don't use an older version of SuperSU than 2.79 SR3!
That's it and it works. SuperSU.apk is going to be installed in step 6.
Successfully tested with XT1642, XT1622 (eta82), XT1643 (Adarsh balu), XT1644 (WTF?), XT1641 (EkisDeMX).
It's the same old guide man. Please see before posting if similar threads exist. XDA is getting confusing for the common non-techie person anyways.
Works perfect on Moto g4 (XT1622) :good:
I've tried to install SuperSU before and it didn't work on my device XT1640. I've got a bootloop and had to flash stock ROM (now I'm using another supersu). Does it really work now? Cuz I don't want to get a bootloop again and lose all my data.
Dex5er said:
I've tried to install SuperSU before and it didn't work on my device XT1640. I've got a bootloop and had to flash stock ROM (now I'm using another supersu). Does it really work now? Cuz I don't want to get a bootloop again and lose all my data.
Click to expand...
Click to collapse
You have to use SuperSU v2.79 SR3. If you use any older version, it won't install systemless and causes bootloops.
Which version of SuperSU did you flash?
And you have to flash ElementalX kernel before installing SuperSU. Otherwise you will get bootloop too.
tywinlannister7 said:
It's the same old guide man. Please see before posting if similar threads exist. XDA is getting confusing for the common non-techie person anyways.
Click to expand...
Click to collapse
Didn't find any thread which describes the method rooting with SuperSU in the first post and as its topic.
In some threads (with other topics like how to root with phh's SuperUser) there is in the discussion mentioned this method with SuperSU but nobody will ever find these posts...
disguisedview said:
You have to use SuperSU v2.79 SR3. If you use any older version, it won't install systemless and causes bootloops.
Which version of SuperSU did you flash?
And you have to flash ElementalX kernel before installing SuperSU. Otherwise you will get bootloop too.
Click to expand...
Click to collapse
I've installed ElementalX Kernel first then I installed SuperSU and I've got a bootloop. I used SuperSU v2.62 and got a bootloop, then I tried with SuperSU v2.74 and also got a bootloop.
Dex5er said:
I've installed ElementalX Kernel first then I installed SuperSU and I've got a bootloop. I used SuperSU v2.62 and got a bootloop, then I tried with SuperSU v2.74 and also got a bootloop.
Click to expand...
Click to collapse
Ok, seems to be the reason. You have to use version 2.79 SR3 or newer if available.
Otherwise it won't work without further modification...
disguisedview said:
Ok, seems to be the reason. You have to use version 2.79 SR3 or newer if available.
Otherwise it won't work without further modification...
Click to expand...
Click to collapse
Alright, is there any problem if I unroot my device with this supersu and root again with the SuperSU that you said, will I get any problem? Do I have to reinstall ElementalX Kernel and twrp again?
Dex5er said:
Alright, is there any problem if I unroot my device with this supersu and root again with the SuperSU that you said, will I get any problem? Do I have to reinstall ElementalX Kernel and twrp again?
Click to expand...
Click to collapse
I don't know. If you have backup of your partitions then flash your original system and boot partition and start from beginning (ElementalX and then SuperSU 2.79 SR3).
If you don't have backups then download (here on xda or somewhere else) stock firmware and flash system und boot partition.
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Asish.pradhan said:
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Click to expand...
Click to collapse
Is it really not working? Or it just doesn't show the popup "TurboPower connected"?
does it work on XT1643 Indian variant ?
---------- Post added at 04:44 PM ---------- Previous post was at 04:40 PM ----------
Asish.pradhan said:
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Click to expand...
Click to collapse
Turbo Power worked fine in my device when using the Ressuruction Rom. Probably restarting the device would solve the issue.
I checked the power input using ampere..its working fine..thnks every1
disguisedview said:
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Code:
SYSTEMLESS=true
So the best is to make sure you don't use an older version of SuperSU than 2.79 SR3!
That's it and it works. SuperSU.apk is going to be installed in step 6.
Successfully tested with XT1642, XT1622 (eta82).
Click to expand...
Click to collapse
Does it work with XT1643 Indian variant ? Please do let me know .
arpith.pr said:
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Does it work with XT1643 Indian variant ? Please do let me know .
Click to expand...
Click to collapse
Nobody confirmed it yet in this thread.
I could it only test with 1642.
But normally i would say it should also work on 1643 variant.
arpith.pr said:
Does it work with XT1643 Indian variant ? Please do let me know .
Click to expand...
Click to collapse
Yes it does work. It is the only way to root stock N on any of the models.
tywinlannister7 said:
Yes it does work. It is the only way to root stock N on any of the models.
Click to expand...
Click to collapse
Thanks
Working on XT1643....
Im making a video on how to do this to make it easier .... For others like me to understand
I can just Reboot to custom recovery, root and then still use my stock recovery?