Hi all i own a Spice MI 410 phone, i tried to install CM9 custom ROM on it using clock work recovery mod but each time after successful updation my phone doesn't reboot! its stuck at boot screen. If i restore it it runs fine. I really want to install a custom rom please help. I cleared all data, dalvik, cache etc. I even tried it using rom manager where it automatically cleans cache but each time its stuck in boot loop! i am really at lost at what to do whole Saturday of mine was wasted doing this, please guide thanks.
i'm in the same condition like you, still trying to get it right :crying:
kuroroku said:
i'm in the same condition like you, still trying to get it right :crying:
Click to expand...
Click to collapse
Sorry to know, well if you find any solution then do share it here.
1) Are you sure the ROM you downloaded is for your phone?
2) Did you try downloading the ROM again? (You could have gotten a bad download.)
Sounds like a soft brick i had this happen several times. Start up in recovery, restore backed up rom, reboot, redownload the rom you are trying to flash, boot recovery, wipe your cache delv, and factory, than try again. If that doesnt work the rom you downloaded is bad. If you didnt make a recovery, take your SD out put it in your computer, download a rom go it that you know definitely works, put it back in your phone and than juat flash the working rom.
Fixing Permission while in recovery has done miraculous things for me and I did not see that you mentioned that. Also on some devices (HTC namely) if you are not running the right bootloader version some ROM's won't boot, EX running CyanogenMod ROM on hboot 1.58. Search your device forum and see if the answer lies there...and whatever it is that is causing this, once resolved please pot back so that others can learn from your experience.
Well the problem is my phone (Spice CSL MI 410) comes in different models in different countries and even different types like cdma/GSM etc. Its Spice CSL MI 410,Wellcom, Motorola Truimph, Huwaie Ideos X6 etc etc So i don't know if this Rom fits my model as here only Ideos x6 forum is present and i downloaded from there, still i will try to redownload it
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Do you have nandroid backup(one that you make with cwm)? If yes go to backup and restore in cwm and hit restore....if not try to reflash rom via cwm or flash stock rom via odin in dowload mode.
emmc is.... http://www.simmtester.com/page/news/showpubnews.asp?num=181
Starojitski said:
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Click to expand...
Click to collapse
If you have nandroid backup.. Just restore it.. Or else download a stock firmware and flash it via odin.. gud luck:good:
flash another rom !!
mythi said:
flash another rom !!
Click to expand...
Click to collapse
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Flash via Odin any stock ROM then root it and flash whatever you like.
This kind of brick may occur easily if you have flashed uncompatible kernel or tried to restore nandroid backup of another ROM or made by uncompatible CWM recovery version.
Sent from my GT-P5110 using XDA Premium HD app
Solved?
dartd27 said:
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Click to expand...
Click to collapse
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
tetakpatak said:
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
Click to expand...
Click to collapse
Thank you for the reply. I had posted a link in here that linked to my thread that explained what i had done and used but it didnt show up for some reason? Anyway I used the below roms(in bold). An update was available for JB and we own two tablets both the P5113 and bought at the same time. One tablet updated fine but the other one would download the package but then would keep failing to install it. So i did a factory reset on the device and then that's when the fun began and it started booting strange.
So I first tried flashing the official JB rom using ODin 3.04.
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
and it still did the same thing so then i tried flashing it back to ICS which is the rom that was on there i think. (It was ICS but not sure if that was the exact version number?)
P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
Im sure the roms are going on there fine as if im not mistaken ICS has a blue battery charge icon and JB a gold one. I noticed that it went from blue to gold when i first loaded the 4.1.1 on there and then back to blue when i put ICS back on there.
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
I tried it anyway and it didnt work
dartd27 said:
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
Click to expand...
Click to collapse
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
tetakpatak said:
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
Click to expand...
Click to collapse
I hear you Its a paper weight right now though so thought id rather try as nothing else is doing the trick.
The tablets are my kids so i preferred to just give them an official stock version. I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics. I now run stock jelly bean on my GS2 but even that has crappy battery life, lucky for it to make it till 4pm and still be on and thats with moderate use. Couple of phone calls and a few text messages and a tiny bit or browsing. I know what is causing it though as it only starts to lose battery when im not on wi fi. It at least doesnt freeze and stop receiving phone calls altogether like PA did though. I used to miss a ton of work calls because the phone had actually frozen.
I love Apex though. I have Apex pro on my GS2 and its much better then the standard launcher. My daughter has the GS3 and it still does not rotate on the home and app screens which i find annoying.
dartd27 said:
I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics.
Click to expand...
Click to collapse
I've got your point, mate. :good:
Same with me: I need all the functions to work. The CM10.1 does it really, but my p5110 is wifi-only device so I'm not sure if CM10.1 is same good for your p5113. CM10.2 seems to be smooth and fast, but many apps aren't yet updated for 4.3 so I will wait a while before I flash it again.
I have cm10.1 on my p5113...it runs amazing...the p5113 owners most of the time have to flash the p5110 version because there is nothing different with the tabs besides the ir port..
Sent from my GT-P5110 using xda app-developers app
help me
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
obeye said:
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
Click to expand...
Click to collapse
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
tetakpatak said:
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
Click to expand...
Click to collapse
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
obeye said:
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
Click to expand...
Click to collapse
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
tetakpatak said:
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
Click to expand...
Click to collapse
Thanks mate!
already done!!
its work!
thank you so much!!
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
Great, I am glad to hear it did charger cable trick help?
Just to make sure: you must be sure to flash a stock ROM first (not JB based custom ROM), after it you will have revived Tab without root. After that normal proceeding: root it, install CWM recovery or custom kernel that fits your ROM (or even whole custom ROM) which already features the CWM recovery.
The stock recovery (3e) checks the signature so of course you can't flash any custom zips. CWM recovery has an option "toggle signature verification" where one can disable signature check. Then you can flash whatever you want, just take care that all you ever flash must be absolutely compatible for your device.
---------- Post added at 03:45 PM ---------- Previous post was at 03:21 PM ----------
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
One more thing mate, look at this video which I've posted on YouTube last January:
http://www.youtube.com/watch?v=0NXBN9Z63TY
It describes how to get rid of the signature verification problem. For the reason that quite many people don't understand english well, I have made a speechless video added by step by step description in the text (video description) so people can just copy the text and paste it into their translators.
If one ROM that you have flashed bootloops on the logo just try another ROM. It happens sometimes. Important is that you should always before flashing another ROM make full wipe: (data/factory reset/cache/dalvik) in your recovery mode.
Did you do it?
Please let me know if you were successful, it should work now! Good luck :fingers-crossed:
It works!
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
After that i rooted it again, installed another recovery and now have the latest stock rom working perfectly.
For those who get the same problem and the tabled keeps rebooting - just plug it into recharger and keep the on/off button until it turns off. Then you can fully charge it before you attempt to flash rom.
Once again, thanks a lot!
PS. now i am considering installing CM10.1
Starojitski said:
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
PS. now i am considering installing CM10.1
Click to expand...
Click to collapse
Great! Congratulations
Yes, install CM10.1.1 with gapps for 4.2.2 it works great, all the functions. Just mind that you can not restore nandroid backups made with other kernel, (sometimes also not if done with older CWM recovery version) and also apps backups made by Titanium backups in older systems aren't good idea to restore once you upgrade to CM10x
If you want to return for any reason to your old (current) ROM, do the same procedure like by unbricking
Hi, I have a big problem with my Galaxy S SCL i9003.
From last week everything was working good, but something happened.
The camera stop working. Hours and hours searching and I find the solution but I need root.
Ok, I make root and surprise, the phone doesn't want to exit from CWM Recovery.
I tried installing ROMs, and the f*cking recovery won't let me do it. I tried with a ROM from a Spanish forum, it was installed all correctly and then another time, the damned recovery.
I tried to install a lot of ROMs, a lot of things from XDA-Developers, now even won't let me to install any ROM.
I do with Odin several times reflashing with original FW and it works by the way... But I need to be root to make my camera work, because I need to replace some system files :crying: :crying: :crying:
Please, what can I do ?!? If I root with Odin everytime my phone won't exit from recovery and the damn recovery even let me install a rom, so I need another time to flash to original FW and well... I can use the phone but I can't use the camera :crying: :crying:
¿What can I do? I tried with 3 different recoveries, all of them are quite old (the newest is from 2012) and I want to know if exists an newer version for my phone. I need to root it, but if I try everytime with Odin and do all good, everytime my phone bricks in Recovery. Whatever I do it's the same... it doesn't exit from recovery mode until I flash to stock FW.
Big thanks in advice. :good:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
acuicultor said:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
Click to expand...
Click to collapse
Hi friend thx for the reply, the thing is that im on stock rom and all goes good, but the problem is I want to root it to solve the camera problem.
I searched on the web and several i9003 and i9001 have this issue when they're updating or when they've been updated... I can solve it changing some files on system but I can't have root access :crying:
I think your problem is related to recovery.
You can flash Bam Kernel via Odin. I'm
using it. Download the latest fix version and
flash it in pda. It has CWM & it will root the
device.
http://forum.xda-developers.com/showthread.php?t=1355675
Hi guys, I'm fckland and I'm relatively new here since I never write but I always come here when I need something
This time I come here with a doubt. I got the motorola xt1032 and it's awesome, I have unlocked the bootloader and rooted it and installed CWM to flash some ROM's, but they didn't worked and bricked my phone, so I had to install google play edition by fastboot (following this guide: http://forum.xda-developers.com/showthread.php?t=2542219 ) and now when I hit "install zip from sdcard" it says: e:\ can't mount sdcard
I want to access that option to install the faux kernel to test it but i can't. What can I do to fix it? I have searched and I didn't find nothin specific for the motorola moto G.
While I was writing this, I installed the TWRP and it worked! I had access to the internal memory without any issue!
BUT I HAD AN ISSUE
I installed the faux kernel with the OC to 1.6GHz and it bricked the OS (google play edition) (stuck at bootanimation), I installed the other version, the non OC and it bricked too and I had to do the tutorial once again since i didn't do a backup
And my second question is... Why this moto g doesn't accept most ROM's and kernels? I have tried with ROM: Carbon, AOSP, MOKEE and none worked and Kernels: faux version u and m and none worked, all of them bricked my phone.
If you need details of the version of my phone or something please ask for it and I'll upload it.
Thank you very much.
Nobody? I need to know at least why I can't install ROM's without having lots of issues.
Post details.
Please post details of which recovery you are using to flash ROMs, which kernel you are on and lastly which ROM works fine and which doesn't.
I, personally think you might had been on philz recovery and issue is not only which /sdcard but with /data.
Post the required info and I'll get back to you.
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Stick with the original kernel.
fckland said:
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Click to expand...
Click to collapse
It's nice that your problem is resolved. And for the kernel as far as I know faux and pink support only stock ROM, no support for CM11 yet. You can search the thread for any other kernel but I would recommend to stick to default kernel now. Moto G is still under huge development, have patience. Soon we'll have a lot of them.
Regarding bootloops, take care that before installing any Rom you format /system along with wipe cache and data. Mount them again and then flash the rom.If any other help needed then post it.
P.S. No need to say Thanks press Thank you instead.
fckland said:
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Click to expand...
Click to collapse
i had also same problem with my moto g...
just u guide me how u solve this problem....?
im unable to instal stock, CWM, and TWRP recovery mode on it... Except philz_touch_6.41.6-moto_falcon..
plz help me
vardhanram said:
i had also same problem with my moto g...
just u guide me how u solve this problem....?
im unable to instal stock, CWM, and TWRP recovery mode on it... Except philz_touch_6.41.6-moto_falcon..
plz help me
Click to expand...
Click to collapse
Why you can't?
Hey!
First of all, this post will be too hard to write because of my English.
I had decided to improve the performance of my Fame a long time ago (I have to clarify that I'm a noob at flashing roms and doing related stuff). So I flashed Galaxy Fame - Stock deodexed and it worked perfect.
After a while my cell phone became slow again so I installed Cyanogenmod 12.1. I didn't like that rom due to the bugs and performance.
So I wiped the data/cache/dalvik and re-flashed the previous deodexed rom again.
What's the problem? It boots and stays in the "s6810L" screen for a few seconds, then reboots and stays in that screen again for a few seconds and THEN it shows the CWM recovery menu.
I haven't tried another rom yet, but I want to know why it didn't work this time... I really like the deodexed rom because it's so smooth and fast.
What am I doing wrong?
I'm sorry for my english again, thanks in advance, and regards!
Edit #1: I'm using this CWM
Hi !
When flashing roms a factory reset is recommended especially when flashing between 2 totally different based roms , cyanogen / stock
My advice is to use odin and revert to stock , don`t flash via recovery
Also , I can move this thread to the designated location if you continue to have problems and the solution I suggested doesn`t work , there may be more users with the same device.
Use the same thread you have linked above to get the firmware
Good luck and let me know !