Hey,
I have been having many problems with flashing custom roms on my fit. Let me describe it to you.
After flashing the custom rom and following the instruction (wipe data etc), when I reboot my device it doesn't boot up (in stock based roms), sometimes it displays a black screen with android written on the side (in cyanogen-mod 7 based roms). The only custom rom that has worked for me till now is 'RazoDroid' (I'm not trying to advertise or anything).
Please help me, I have downloaded more than 15 custom roms and none of them work.
Thank You.
UltimateWater said:
Hey,
I have been having many problems with flashing custom roms on my fit. Let me describe it to you.
After flashing the custom rom and following the instruction (wipe data etc), when I reboot my device it doesn't boot up (in stock based roms), sometimes it displays a black screen with android written on the side (in cyanogen-mod 7 based roms). The only custom rom that has worked for me till now is 'RazoDroid' (I'm not trying to advertise or anything).
Please help me, I have downloaded more than 15 custom roms and none of them work.
Thank You.
Click to expand...
Click to collapse
how long did you wait before deciding that the rom doesnt boot.
wait atleast 5 min for the bootanimation to come.
then the total boot time can be as long as 20min .
so dont be desperate and wait do something else till then.
If still problem persists make a boot logcat i.e. start a logcat boot the device wait the prescribed 20 min and close the logcat and post it here.
also do the above mentioned thing for cm7 official and let me know.:good:
Thanks for your reply,
I have waited for as long as an hour.
I finally got it working.
1) For Cm based roms, I had to format /system.
2) I don't actually know how it worked on stock based roms this time, I tried the instructions given by a.cid not the Rom's instruction provided in their respective threads.
Thank You to a.cid for your beginner's guide. Press the thanks button on his thread here, if he helped you too.
Hi there, I have been trying for countless hours to make a custom ROM work on my P920 with no results, always some issues. I've managed to brick my phone in different ways a billion times now, then spent billion hours unbricking it and in the end I'm always back to where I started. I would really love some help please.
My phone is P920.
The android version I'm running is: 2.3.5
Kernel version: 2.6.35.7+
Software version: V21E
Rooting method: megatron
Now I would like a ROM that uses Android 4 and that can still use the 3D features such as 3D camera, the ROM calledthe Darkroom International would be an example I imagine.
While that's one of the ROMs that I would want, I've tried many, and always encountering issues, let me clarify.
First of all my device has to be rooted and since SuperOneClick doesn't work for me as it gets stuck on step 7, I use megatron which works well. I even double check if my phone is rooted with the Root Checker from the Android store. Now according to the guides I've read I need a custom recovery system, so I install Clockworkmod. I then place the ROM on the SD card, in the recovery menu I delete cache, that other cache, format it, format system, data, everything those guides tell me to. Afterwards, I install the ROM by selecting the zip and then I reboot. I've tried like 3 different ROMs, jellybem, cyanogenmod and some other. Yes I know none of them support 3D features - I didn't know at the time. Anyway, the issue was always the same, right after the LG logo there would be a screen with some weird colors showing the display of what happened before the phone crashed. Before it crashed? Yes, the phone would actually boot into the ROM but only for a few minutes, crashing afterwards. The next time I would boot, it would show that weird screen with those fancy colors with what happened just before it crashed. So I followed some steps and I got back to the original 2.3.5 ROM, everything back to normal.
I tried doing some more research and I came across the Darkroom Intentional ROM which had a bit different instructions. It asked me to install TWRP recovery with a bootloader, so I did, successfully, then did all the clean cache etc, installed ROM, bam, wouldn't boot at all. Oh boy have I had issues here, I couldn't even get it back to the default 2.3.5 stock ROM because my phone wasn't even recognized in the device manager. So I did some more research, found a solution, managed to flash back to 2.3.5 stock and I'm back to square one.
Now, could someone please help and explain to me what exactly have I done wrong and how I can make it right? I've spent countless hours now trying to install a custom ROM with no success. Sorry about the long read. If you need me to supply some more information please let me know. Thank you.
First of all if u want to use an ICS ROM then u need to update to ICS FIRST u can't flash it directly from 2.3.5 u can use xbsalls thread to update......
Next if cm based Roms are crashing then u need to flash bootloaders which means u should use os_hacking tool to flash ICS bootladers if u wanna update
Or flash GB bootloaders
So first update if u want
Root
Flash bootloaders
Flash recovery
Flash Roms
Sent from my Nexus 4 using xda app-developers app
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Do you have nandroid backup(one that you make with cwm)? If yes go to backup and restore in cwm and hit restore....if not try to reflash rom via cwm or flash stock rom via odin in dowload mode.
emmc is.... http://www.simmtester.com/page/news/showpubnews.asp?num=181
Starojitski said:
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Click to expand...
Click to collapse
If you have nandroid backup.. Just restore it.. Or else download a stock firmware and flash it via odin.. gud luck:good:
flash another rom !!
mythi said:
flash another rom !!
Click to expand...
Click to collapse
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Flash via Odin any stock ROM then root it and flash whatever you like.
This kind of brick may occur easily if you have flashed uncompatible kernel or tried to restore nandroid backup of another ROM or made by uncompatible CWM recovery version.
Sent from my GT-P5110 using XDA Premium HD app
Solved?
dartd27 said:
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Click to expand...
Click to collapse
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
tetakpatak said:
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
Click to expand...
Click to collapse
Thank you for the reply. I had posted a link in here that linked to my thread that explained what i had done and used but it didnt show up for some reason? Anyway I used the below roms(in bold). An update was available for JB and we own two tablets both the P5113 and bought at the same time. One tablet updated fine but the other one would download the package but then would keep failing to install it. So i did a factory reset on the device and then that's when the fun began and it started booting strange.
So I first tried flashing the official JB rom using ODin 3.04.
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
and it still did the same thing so then i tried flashing it back to ICS which is the rom that was on there i think. (It was ICS but not sure if that was the exact version number?)
P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
Im sure the roms are going on there fine as if im not mistaken ICS has a blue battery charge icon and JB a gold one. I noticed that it went from blue to gold when i first loaded the 4.1.1 on there and then back to blue when i put ICS back on there.
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
I tried it anyway and it didnt work
dartd27 said:
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
Click to expand...
Click to collapse
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
tetakpatak said:
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
Click to expand...
Click to collapse
I hear you Its a paper weight right now though so thought id rather try as nothing else is doing the trick.
The tablets are my kids so i preferred to just give them an official stock version. I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics. I now run stock jelly bean on my GS2 but even that has crappy battery life, lucky for it to make it till 4pm and still be on and thats with moderate use. Couple of phone calls and a few text messages and a tiny bit or browsing. I know what is causing it though as it only starts to lose battery when im not on wi fi. It at least doesnt freeze and stop receiving phone calls altogether like PA did though. I used to miss a ton of work calls because the phone had actually frozen.
I love Apex though. I have Apex pro on my GS2 and its much better then the standard launcher. My daughter has the GS3 and it still does not rotate on the home and app screens which i find annoying.
dartd27 said:
I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics.
Click to expand...
Click to collapse
I've got your point, mate. :good:
Same with me: I need all the functions to work. The CM10.1 does it really, but my p5110 is wifi-only device so I'm not sure if CM10.1 is same good for your p5113. CM10.2 seems to be smooth and fast, but many apps aren't yet updated for 4.3 so I will wait a while before I flash it again.
I have cm10.1 on my p5113...it runs amazing...the p5113 owners most of the time have to flash the p5110 version because there is nothing different with the tabs besides the ir port..
Sent from my GT-P5110 using xda app-developers app
help me
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
obeye said:
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
Click to expand...
Click to collapse
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
tetakpatak said:
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
Click to expand...
Click to collapse
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
obeye said:
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
Click to expand...
Click to collapse
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
tetakpatak said:
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
Click to expand...
Click to collapse
Thanks mate!
already done!!
its work!
thank you so much!!
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
Great, I am glad to hear it did charger cable trick help?
Just to make sure: you must be sure to flash a stock ROM first (not JB based custom ROM), after it you will have revived Tab without root. After that normal proceeding: root it, install CWM recovery or custom kernel that fits your ROM (or even whole custom ROM) which already features the CWM recovery.
The stock recovery (3e) checks the signature so of course you can't flash any custom zips. CWM recovery has an option "toggle signature verification" where one can disable signature check. Then you can flash whatever you want, just take care that all you ever flash must be absolutely compatible for your device.
---------- Post added at 03:45 PM ---------- Previous post was at 03:21 PM ----------
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
One more thing mate, look at this video which I've posted on YouTube last January:
http://www.youtube.com/watch?v=0NXBN9Z63TY
It describes how to get rid of the signature verification problem. For the reason that quite many people don't understand english well, I have made a speechless video added by step by step description in the text (video description) so people can just copy the text and paste it into their translators.
If one ROM that you have flashed bootloops on the logo just try another ROM. It happens sometimes. Important is that you should always before flashing another ROM make full wipe: (data/factory reset/cache/dalvik) in your recovery mode.
Did you do it?
Please let me know if you were successful, it should work now! Good luck :fingers-crossed:
It works!
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
After that i rooted it again, installed another recovery and now have the latest stock rom working perfectly.
For those who get the same problem and the tabled keeps rebooting - just plug it into recharger and keep the on/off button until it turns off. Then you can fully charge it before you attempt to flash rom.
Once again, thanks a lot!
PS. now i am considering installing CM10.1
Starojitski said:
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
PS. now i am considering installing CM10.1
Click to expand...
Click to collapse
Great! Congratulations
Yes, install CM10.1.1 with gapps for 4.2.2 it works great, all the functions. Just mind that you can not restore nandroid backups made with other kernel, (sometimes also not if done with older CWM recovery version) and also apps backups made by Titanium backups in older systems aren't good idea to restore once you upgrade to CM10x
If you want to return for any reason to your old (current) ROM, do the same procedure like by unbricking
Hi, I have a big problem with my Galaxy S SCL i9003.
From last week everything was working good, but something happened.
The camera stop working. Hours and hours searching and I find the solution but I need root.
Ok, I make root and surprise, the phone doesn't want to exit from CWM Recovery.
I tried installing ROMs, and the f*cking recovery won't let me do it. I tried with a ROM from a Spanish forum, it was installed all correctly and then another time, the damned recovery.
I tried to install a lot of ROMs, a lot of things from XDA-Developers, now even won't let me to install any ROM.
I do with Odin several times reflashing with original FW and it works by the way... But I need to be root to make my camera work, because I need to replace some system files :crying: :crying: :crying:
Please, what can I do ?!? If I root with Odin everytime my phone won't exit from recovery and the damn recovery even let me install a rom, so I need another time to flash to original FW and well... I can use the phone but I can't use the camera :crying: :crying:
¿What can I do? I tried with 3 different recoveries, all of them are quite old (the newest is from 2012) and I want to know if exists an newer version for my phone. I need to root it, but if I try everytime with Odin and do all good, everytime my phone bricks in Recovery. Whatever I do it's the same... it doesn't exit from recovery mode until I flash to stock FW.
Big thanks in advice. :good:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
acuicultor said:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
Click to expand...
Click to collapse
Hi friend thx for the reply, the thing is that im on stock rom and all goes good, but the problem is I want to root it to solve the camera problem.
I searched on the web and several i9003 and i9001 have this issue when they're updating or when they've been updated... I can solve it changing some files on system but I can't have root access :crying:
I think your problem is related to recovery.
You can flash Bam Kernel via Odin. I'm
using it. Download the latest fix version and
flash it in pda. It has CWM & it will root the
device.
http://forum.xda-developers.com/showthread.php?t=1355675
RECENTLY I STARTED HAVING BATTERY PROBLEMS WITH MY SAMSUNG GALAXY S DUOS
I LOOKED UP ON THE WEB AND SAW THAT CUSTOM ROOM'S MAY SOLVE MY PROBLEMS
I INSTALLED A CYANOGEN OS BUT STILL THE BATTERY PROBLEM PERSISTED
THEN I BOUGHT A NEW CHARGER
IT SEEMED THAT THE NEW CHARGER SOLVED MY PROBLEM
SO I DECIDED TO SWITCH BACK TO MY STOCK FIRMWARE
I THOUGHT THAT WHY NOT TRY STOCK FIRMWARE OF ANOTHER DEVICE
BUT BY DOING THIS I ENDED UP WITH THE-->>"FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE" ... BLAH... BLAH... BLAH
THEN I DOWNLOADED STOCK FIRMWARE FOR MY DEVICE ONLY AND FLASHED IT
IT GOT RUNNING
BUT AFTER A FEW DAYS I GOT BORED WITH THE LAGGY STOCK FIRMWARE
SO I SEARCHED XDA FOR ANOTHER CUSTOM ROM FOR GT-S7562
I DECIDED TO FLASH THE PMP LIGHT ROM ESPECIALLY MADE FOR GT-S7562
BUT AFTER FLASHING IT I HAD GSM CONNECTION PROBLEMS
SO BACK TO STOCK ROM AGAIN
BUT THIS TIME WHEN I FLASHED THE STOCK ROM IT GOT STUCK AT THE SAMSUNG LOGO
I COULDN'T GO INTO RECOVERY MODE THEN
SO I CORRUPTED THE DEVICE AGAIN AND INSTALLED THE STOCK FIRMWARE
BUT AGAIN BOOT LOOP NO BOOT SOUND AND NO RECOVERY
I TRIED MANY THREADS
I TRIED http://forum.xda-developers.com/showthread.php?t=2426426
I TRIED http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791
AND MORE AND MORE THAN THE NUMBER OF NERVE CELLS IN MY BODY
SO...
PLEASE ANY HELP WOULD BE APPRECIATED
I WROTE THIS WHOLE THREAD WHILE CRYING:crying::crying::crying:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
I have tried before but without success any way thanks i will try it once again
boy maztoul said:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
Click to expand...
Click to collapse
didn't work !!