Related
Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.
put dload in sdcard
press volume +,-,power
everything will start
Hi I suppose only if we have stock recovery , it will work ?!.
Sent from my Che1-L04 using XDA Free mobile app
awesome
I think you've done great job here
Thank you
after flashing the old firmware's files i got no boot and i dont mean bootloop i mean phone is not booting at all just stopped at the first screen
is there any solution
I did everything you mentioned but in adb devices its showing No devices found. I forgot to turn on usb debugging. What to do now. Its struck on the window Fastboot and rescue mode.
---------- Post added at 02:11 PM ---------- Previous post was at 02:04 PM ----------
Hey Huawei. I contacted you earlier for the bootloader unlock key and got the same from you which I would Like to thank yOu for same. After unlocking bootloader I installed MIUI ROM on my Honor 4x (Che1-l04) and it ran smoothly. But I didn't like it much and wanted to change back to my stock ROM. I tried to Install your Honor 4x Android L. I extracted the ZIP file using Huawei Update extractor and did the steps mentioned by XDA Developers. Here- http://forum.xda-developers.com/android/development/reverting-to-stock-rom-honor-4xmsm8916-t3168732
After doing All steps While doing ''adb reboot'' Its saying DEVICE NOT FOUND in cmd. I Found that i forgot to turn on USB debugging. But now my device is struck on FASTBOOT AND RESCUE MODE.(PHONE UNLOCKED).I am not able to tur it on. I tried many steps to show my device but failed. Please help me regarding this. I will be highly thankful to you
Beware!
This tutorial seems to be written very sloppy and doesn't work at all. (at least not on a CHE2-11)
After entering fastboot mode no adb commands will work.
"adb boot" must be replaced by fastboot reboot.
After applying your changes however my pone hangs at the first screen (showing "honor")
I've the same problem than you tosho1. And the adb commands not work in bootloader/fastboot mode. Only in recovery and system
some issuses
when i extract the recovery, boot and system.img files from the UPDATE.APP file with the Update Extractor tool, it creates 6 files instead of 3:
1. BOOT.img
2. BOOT.img.header
3. RECOVERY.img
4. RECOVERY.img.header
5. SYSTEM.img
6. SYSTEM.img.header
What is the purpose of the file which ends with ".header" extension ?
praveen1988 said:
Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.
Click to expand...
Click to collapse
In case, anyone wants to know how to downgrade from Marshmallow to kitkat on honor 4x. Refer this thread: http://forum.xda-developers.com/honor-4x/help/provide-downgrade-procedure-emui-4-0-to-t3409717/page2
Solution is given on Page 2. Also, you cannot downgrade to 4.4.4 directly from 6.0.1. You need to go from 6.0 to 5.1 and then 4.4.4. For details refer the link.
In honor 4c i unloked bootloader and rooted my device no twrp installed when i flashed twrp file i struck at honor logo......
Can anyone resolve it plz......
pls help!!
does this work on locked bootloader?? any posssibility? i flashed twrp and it ended in loop gained root access throuh king root what to do??:crying:
pl suggest I am facing the same problem, error shows while flashing that ( remote data is too large)- I have updated the fastboot binaries but no success... Help me out pLease
i am not able to flash recovery and boot,getting a error "remote:size too large".What to do??
not working
Huawei update extractor stucks while extraction boot.img
any fix
Does not work
dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
It does not work in my case. Could you please help.
praveen1988 said:
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Click to expand...
Click to collapse
It actually worked for me ( I messed up with custo roms). Now i'm back to stock. Thanks!
P.S. Honor 6x
dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
i stuck on the huawei recovery mode around 90% . Wait for 3 hours and more also stuck on 90%.
Please help
How can be unlock honor che-L04 if there is invalid imei in the phone
Sent from my Redmi 3S using Tapatalk
---------- Post added at 03:49 PM ---------- Previous post was at 03:40 PM ----------
How to unlock honor Che1-L04 if there is no imei in stock rom installed in phone by huawei smartphone multi-download software v1002
Sent from my Redmi 3S using Tapatalk
I cant install the adb tool ki. it keeps closing
Hi all,
Well I love my phone, just love it! BUT having bought it from China, like many I am stuck with the Chinese Model and firmware. Huawei Australia have assisted in unlocking the bootloader, now I am ready to root the phone. BUT, I have not had any luck sourcing a root method for it. Can someone please PLEASE help.
I am desperate as it keeps booting me out of Google Play Services, rendering my Huawei watch useless (ironic huh)
Any help would be appreciated. Email me if you like [email protected]
Michael
flash twrp recovery and install root with it very easy way
A Big Thank You and....
rowihel2012 said:
flash twrp recovery and install root with it very easy way
Click to expand...
Click to collapse
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
1 min Search
michaeldanielbourke said:
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Click to expand...
Click to collapse
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
rowihel2012 said:
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
Click to expand...
Click to collapse
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
michaeldanielbourke said:
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
Click to expand...
Click to collapse
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
You are so so helpful.
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I will try this when i get home. I am always confused by the process. I am to old for all of this
Michael
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Sadly, this does not work for me. I did everything you suggested and in the command window I get nothing
I know the risks ( I think)
Hirs_E_Fruit said:
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Click to expand...
Click to collapse
Thanks so much for your concern, I know. But I love the phone but need to make it more Android (Google) friendly as it has Chinese firmware which keeps ending any relationship I have with google play services thus rendering the phone useless (almost)
You have been so helpful
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Have u unlocked the bootloader?
BTW my method i posted works if u do it right!
michaeldanielbourke said:
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Click to expand...
Click to collapse
The recovery img file link did you downloaded it?
You must download it and but the recovery.img file in fastboot folder
Then rename it to recovery.img.
And open cmd orders from fastboot folder .
Just type
fastboot flash recovery recovery.img
You must download the recovery file into the same folder that you ran your command and in your case "p8 max root". Make sure that the recovery filename is recovery.img instead of some other names.
Sent from my HUAWEI P8max using Tapatalk
Can I just say you have all been so helpful, l am a newb who got cocky and killed my beautiful phone. Now i just get the Huawei logo and no software
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Stock
Leechoonhwee said:
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Click to expand...
Click to collapse
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
I think it's time to unroot and flash a new system and do it like i posted, then it will work!
michaeldanielbourke said:
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
Click to expand...
Click to collapse
Did you reflash recovery2 also?
WTF did I do? no idea guys...
I had my phone working fine, I found out that was an official lolipop, I WANTED IT.
1. I had my phone with MT7-L09V1... and rooted,
2. I tried to install lolipop manually wth usb debugging on, trough the phone normally then with the reset was jumping one of the recovery I had no idea which one was it but it wasn't working I guess because my recovery was 4.4 no idea...
3. Then I installed Recovery installer for mate7 android 5.1, in my pc is a software that allows you to install any recovery for ascend mate 7 I guess you know what's that.
4. I installed Twrp 2.8.7.0 recovery 4.4, and then I entered in recovery mode.
Wait for it......
5. I wiped: System, Cache, Data and Cust. Now I can't entered my OS.
What do I have to do now? I just want lolipop but now I'm scared if I f**** bricked my phone because I don't know what I'm doing...
Little help pls I'm fu*** xD
Guys any idea please... I can't find anything ... Can't believe what I did I read a lot of things, but I can't follow a proper guide with my case, and where to download the stock image of kiktat wheter I want loli...
ivan333 said:
Guys any idea please... I can't find anything ... Can't believe what I did I read a lot of things, but I can't follow a proper guide with my case, and where to download the stock image of kiktat wheter I want loli...
Click to expand...
Click to collapse
1. Got and install kitkat 4.4 stock recovery(flash via adb commands, or windows app)
2. Download huawei lolipop to kitkat transition package, put it to folder dload on (fat32 formated) memory card and flash it via keycombo (try to insert memory card in card slot just after huawei logo
3. If it flash succesfuly go to next step, if not, try to flash system.img recovery.img boot.img via fastboot commands (fastboot flash recovery recovery.img) on bootloader screen (turn on phone with volume down + power button with your phone plugged in the PC). You can extract this images from kitkat rom file, there is huawei firmware extractor on the web.
3. Flash kitkat firmware via (dload folder and keycombo metod)
gahu777 said:
1. Got and install kitkat 4.4 stock recovery(flash via adb commands, or windows app)
2. Download huawei lolipop to kitkat transition package, put it to folder dload on (fat32 formated) memory card and flash it via keycombo (try to insert memory card in card slot just after huawei logo
3. If it flash succesfuly go to next step, if not, try to flash system.img recovery.img boot.img via fastboot commands (fastboot flash recovery recovery.img) on bootloader screen (turn on phone with volume down + power button with your phone plugged in the PC). You can extract this images from kitkat rom file, there is huawei firmware extractor on the web.
3. Flash kitkat firmware via (dload folder and keycombo metod)
Click to expand...
Click to collapse
Thanks it worked xDDD Thanks man.
my honor 6 plus was perfect on android lollipop B334 then I try to update it to Marshmallow B503 but I do a mistake and I unzip the update file so it is bricked and still restarting , then I try to Unbrick it with multitool by lollipop B334 and it complete the process but hang on honor screen without any response even 3 buttons not respond or recovery mod not respond only fast boot can respond >>> plz help me
midosalah said:
my honor 6 plus was perfect on android lollipop then I try to update it to Marshmallow B503 but I do a mistake and I unzip the update file so it is bricked and still restarting , then I try to Unbrick it with multitool by lollipop B334 and it complete the process but hang on honor screen without any response even 3 buttons not respond or recovery mod not respond only fast boot can respond >>> plz help me
Click to expand...
Click to collapse
Downoad Huawei Update Extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract B503 and copy Update.app in a folder
Open Huawei Update Extractor and select Update.app B503
select with the right button and extract:
RECOVERY.img
BOOT.img
Download adb here:
http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip
Extract adb.zip and copy the extracted files RECOVERY.img BOOT.img in the folder adb
Turn off the device and boot into fastboot mode
In the folder adb run cmd.exe as administrator and type these commands:
fastboot devices
If the device is recognized correctly displaying a series of numbers
Then type
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
Copy UPDATE.app of B334 in SD/dload folder
Insert the SD without connecting
Disconnect the USB cable
Press the power button to turn off
When you feel the vibration press 3btn
When you see the logo Honor connect the SD
Wait for the recovery process
Try several times if it does not work
If the procedure from recovery fails
Turn off the device and boot into fastboot mode
From multitool install CWM or TWRP and find somewhere a backup of B803 to restore it
I'm sorry my device is H60-L02, i do not know where to find rollback or backup for your device
Good luck
panamera2011 said:
Downoad Huawei Update Extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract B503 and copy Update.app in a folder
Open Huawei Update Extractor and select Update.app B503
select with the right button and extract:
RECOVERY.img
BOOT.img
Download adb here:
http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip
Extract adb.zip and copy the extracted files RECOVERY.img BOOT.img in the folder adb
Turn off the device and boot into fastboot mode
In the folder adb run cmd.exe as administrator and type these commands:
fastboot devices
If the device is recognized correctly displaying a series of numbers
Then type
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
Copy UPDATE.app of B334 in SD/dload folder
Insert the SD without connecting
Disconnect the USB cable
Press the power button to turn off
When you feel the vibration press 3btn
When you see the logo Honor connect the SD
Wait for the recovery process
Try several times if it does not work
If the procedure from recovery fails
Turn off the device and boot into fastboot mode
From multitool install CWM or TWRP and find somewhere a backup of B803 to restore it
I'm sorry my device is H60-L02, i do not know where to find rollback or backup for your device
Good luck
Click to expand...
Click to collapse
I need marshmallow for PE-TL10 ( Update.app ) to unbrick
midosalah said:
I need marshmallow for PE-TL10 ( Update.app ) to unbrick
Click to expand...
Click to collapse
All firmware Honor 6 Plus
https://yadi.sk/d/W89LOzdMi5mdN/tl10
Rollback EMUI 4.0 - 3.1
https://cloud.mail.ru/public/CSgn/aNNSAd27x
Sent from my H60-L02 using Tapatalk
panamera2011 said:
All firmware Honor 6 Plus
Rollback EMUI 4.0 - 3.1
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
hi, mine is on b332 can i use the ota update to b503 also?
bbjun04 said:
hi, mine is on b332 can i use the ota update to b503 also?
Click to expand...
Click to collapse
Sorry mate but I L02, I am not informed about firmware for Honor 6 Plus
Look on Honor 6 Plus 4pda They are very active for Honor 6 Plus, just use google translator
Perhaps to install the B503 you need the B334
https://yadi.sk/d/W89LOzdMi5mdN/tl10/OTA b334 to b503 (marshmallow 6.0) RU
https://yadi.sk/d/W89LOzdMi5mdN/tl10
panamera2011 said:
Downoad Huawei Update Extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract B503 and copy Update.app in a folder
Open Huawei Update Extractor and select Update.app B503
select with the right button and extract:
RECOVERY.img
BOOT.img
Download adb here:
http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip
Extract adb.zip and copy the extracted files RECOVERY.img BOOT.img in the folder adb
Turn off the device and boot into fastboot mode
In the folder adb run cmd.exe as administrator and type these commands:
fastboot devices
If the device is recognized correctly displaying a series of numbers
Then type
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
Copy UPDATE.app of B334 in SD/dload folder
Insert the SD without connecting
Disconnect the USB cable
Press the power button to turn off
When you feel the vibration press 3btn
When you see the logo Honor connect the SD
Wait for the recovery process
Try several times if it does not work
If the procedure from recovery fails
Turn off the device and boot into fastboot mode
From multitool install CWM or TWRP and find somewhere a backup of B803 to restore it
I'm sorry my device is H60-L02, i do not know where to find rollback or backup for your device
Good luck
Click to expand...
Click to collapse
I think there are rollback and backup for my device : https://cloud.mail.ru/public/8hmu/62Nq9L7wr
but , How can I deal with it ? and How can I install CWM or TWRP ?
@midosalah There are two rollback, what do you want to restore, 6.1.1 or B351?
https://cloud.mail.ru/public/CSgn/aNNSAd27x
Flash BOOt.img of B803
Copy rollback in SD/dload
Insert the SD without connecting
Disconnect the USB cable
Press the power button to turn off
When you feel the vibration press 3btn
When you see the logo Honor connect the SD
Wait for the recovery process
If it works
Turn off the device and boot into fastboot mode
With multitool install TWRP http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Copy backup in SD/TWRP/Backup,connect the SD
go into TWRP (volume up + power) and restore the backup
I want to restore from marshmallow B503 to lollipop B334 ... my device is stopped up to 3 weeks
midosalah said:
I think there are rollback and backup for my device : https://cloud.mail.ru/public/8hmu/62Nq9L7wr
but , How can I deal with it ? and How can I install CWM or TWRP ?
Click to expand...
Click to collapse
midosalah said:
I want to restore from marshmallow B503 to lollipop B334 ... my device is stopped up to 3 weeks
Click to expand...
Click to collapse
Flash BOOT.img and RECOVERY.img of B803 with the guide that I posted previously
Copy rollback in SD/dload
Insert the SD without connecting
Disconnect the USB cable
Press the power button to turn off
When you feel the vibration press 3btn
When you see the logo Honor connect the SD
Wait for the recovery process
If it works
Turn off the device and boot into fastboot mode
With multitool install TWRP http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Copy backup in SD/TWRP/Backup,connect the SD
go into TWRP (volume up + power) and restore the backup
Sorry, but xda tonight does not work well I do not understand why
panamera2011 said:
Flash BOOT.img and RECOVERY.img of B803 with the guide that I posted previously
Copy rollback in SD/dload
Insert the SD without connecting
Disconnect the USB cable
Press the power button to turn off
When you feel the vibration press 3btn
When you see the logo Honor connect the SD
Wait for the recovery process
If it works
Turn off the device and boot into fastboot mode
With multitool install TWRP http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Copy backup in SD/TWRP/Backup,connect the SD
go into TWRP (volume up + power) and restore the backup
Sorry, but xda tonight does not work well I do not understand why
Click to expand...
Click to collapse
recovery process always stop at 5% and fail
midosalah said:
recovery process always stop at 5% and fail
Click to expand...
Click to collapse
The procedure must be done with the USB cable disconnected
Sent from my H60-L02 using Tapatalk
panamera2011 said:
The procedure must be done with the USB cable disconnected
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
I already disconnect the USB cable
midosalah said:
I already disconnect the USB cable
Click to expand...
Click to collapse
That Rollback you used?
panamera2011 said:
That Rollback you used?
Click to expand...
Click to collapse
I used rollback in the link but also fail
midosalah said:
I used rollback in the link but also fail
Click to expand...
Click to collapse
There are two rollback in the link posted, 6.1.16 to 6.1.1 and 6.1.16 to B351
panamera2011 said:
There are two rollback in the link posted, 6.1.16 to 6.1.1 and 6.1.16 to B351
Click to expand...
Click to collapse
I was on B334 not B351 and was bricked during update to B503 marshmallow ....
midosalah said:
I was on B334 not B351 and was bricked during update to B503 marshmallow ....
Click to expand...
Click to collapse
Yes, but the rollback is for B351
In my opinion, you need to install and BOOT.img and recovery.img of 6.1.16 to run the rollback, otherwise you have to find the rollback of B503
panamera2011 said:
Yes, but the rollback is for B351
In my opinion, you need to install and BOOT.img and recovery.img of 6.1.16 to run the rollback, otherwise you have to find the rollback of B503
Click to expand...
Click to collapse
Where can I find 6.1.16 ?
midosalah said:
Where can I find 6.1.16 ?
Click to expand...
Click to collapse
Use this guide with UPADATE.app 6.1.1
http://forum.xda-developers.com/showpost.php?p=65390712&postcount=2
---------- Post added at 01:44 AM ---------- Previous post was at 01:26 AM ----------
midosalah said:
Where can I find 6.1.16 ?
Click to expand...
Click to collapse
6.1.1
https://cloud.mail.ru/public/GFdq/CE6aRvrKg
If you can not restore it tonight, install the TWRP, so you can turn off the device and put it in charge
otherwise a long time in bootloop you may damage the battery
I have to study tomorrow, bye
Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath
sampathnayak09 said:
Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath
Click to expand...
Click to collapse
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
How to return back to Stock Recovery & Install Stock Rom.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
@DigiGoon
@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img
@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
mahadikrs said:
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.
Click to expand...
Click to collapse
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.
muradulislam said:
@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.
Click to expand...
Click to collapse
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.
sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs
mahadikrs said:
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.
Click to expand...
Click to collapse
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.
muradulislam said:
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.
Click to expand...
Click to collapse
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0
DigiGoon said:
@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Hi,
I did flash the stock recovery, but my phone keeps rebooting and doesn't get into recovery mode.
I am sure it has sufficient battery charge. (Close to 90%).
Is there a way to do a clean install on Android phones? Like the way we install Windows OS on computers. Format hard disks, create partitions and then install a fresh OS?
Thanks
mahadikrs said:
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0
Click to expand...
Click to collapse
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?
sampathnayak09 said:
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?
Click to expand...
Click to collapse
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.
mahadikrs said:
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.
Click to expand...
Click to collapse
Thank you for providing the links. Let me try installing these.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
goldfinv said:
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs
Click to expand...
Click to collapse
Phone has 75% + charge as shown in TWRP recovery.
sampathnayak09 said:
Phone has 75% + charge as shown in TWRP recovery.
Click to expand...
Click to collapse
Maybe try flashing one of the custom EMUI ROMs via TWRP?
Sent from my H60-L04 using XDA Labs
@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
sampathnayak09 said:
@[email protected]@goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Give it a couple of tries. Users have suggested that it usually gets stuck somewhere but trying for 2,3 times gets the job done.
Sent from my PLK-L01 using XDA Labs
sampathnayak09 said:
@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Let me know which Rom version is your phone running now & which version you are trying to migrate to.
Also if 3 button Force update is not working then you can try the project menu option.
But first let me know what state your phone is currently in.