Related
Hi all,
Well I love my phone, just love it! BUT having bought it from China, like many I am stuck with the Chinese Model and firmware. Huawei Australia have assisted in unlocking the bootloader, now I am ready to root the phone. BUT, I have not had any luck sourcing a root method for it. Can someone please PLEASE help.
I am desperate as it keeps booting me out of Google Play Services, rendering my Huawei watch useless (ironic huh)
Any help would be appreciated. Email me if you like [email protected]
Michael
flash twrp recovery and install root with it very easy way
A Big Thank You and....
rowihel2012 said:
flash twrp recovery and install root with it very easy way
Click to expand...
Click to collapse
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
1 min Search
michaeldanielbourke said:
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Click to expand...
Click to collapse
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
rowihel2012 said:
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
Click to expand...
Click to collapse
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
michaeldanielbourke said:
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
Click to expand...
Click to collapse
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
You are so so helpful.
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I will try this when i get home. I am always confused by the process. I am to old for all of this
Michael
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Sadly, this does not work for me. I did everything you suggested and in the command window I get nothing
I know the risks ( I think)
Hirs_E_Fruit said:
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Click to expand...
Click to collapse
Thanks so much for your concern, I know. But I love the phone but need to make it more Android (Google) friendly as it has Chinese firmware which keeps ending any relationship I have with google play services thus rendering the phone useless (almost)
You have been so helpful
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Have u unlocked the bootloader?
BTW my method i posted works if u do it right!
michaeldanielbourke said:
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Click to expand...
Click to collapse
The recovery img file link did you downloaded it?
You must download it and but the recovery.img file in fastboot folder
Then rename it to recovery.img.
And open cmd orders from fastboot folder .
Just type
fastboot flash recovery recovery.img
You must download the recovery file into the same folder that you ran your command and in your case "p8 max root". Make sure that the recovery filename is recovery.img instead of some other names.
Sent from my HUAWEI P8max using Tapatalk
Can I just say you have all been so helpful, l am a newb who got cocky and killed my beautiful phone. Now i just get the Huawei logo and no software
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Stock
Leechoonhwee said:
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Click to expand...
Click to collapse
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
I think it's time to unroot and flash a new system and do it like i posted, then it will work!
michaeldanielbourke said:
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
Click to expand...
Click to collapse
Did you reflash recovery2 also?
i used the source in this thread:
http://forum.xda-developers.com/honor-6/help/honor-6-android-6-0-emui-4-0-update-t3314139#post65315904
upgraded directly form b521 to b805 (H60-L04), but the battery drain is very high... tried to upgrade to b806, 807, 810 all failed tried to downgrade to b521 or any other version but also failed..
please need help.. the battery empty in less than a day
You have twrp backup of your b805 ?
Steve Giordano said:
You have twrp backup of your b805 ?
Click to expand...
Click to collapse
no.. why??
For correct downgrade to lollipop, first you make a twrp backup.
Your current version is L04-C432B805 ?
Guide to make a backup:
UNLOCK BOOTLOADER WITH MULTITOOL
Download
TWRP_2.8.7.0_EN_EMUI_4.0_v4.img
AND
ADB
Copy TWRP_2.8.7.0_EN_EMUI_4.0_v4.img in the adb folder,
turn off the device and boot into fastboot mode
in adb folder run cmd.exe as administrator and type these commands:
Code:
fastboot devices
If the device is recognized correctly displaying a series of numbers;
Then type
Code:
fastboot flash recovery TWRP_2.8.7.0_EN_EMUI_4.0_v4.img
fastboot reboot
Disconnect the USB cable and press volume up + power (press 8 - 10 seconds) to enter into recovery.
Into Recovery:
BACKUP (ALL)
After finish save the backup the folder TWRP (with the backup).
After this you flash a stock recovery and stock boot.img of b803 firmware
and install downgrade package for b803, after this, install Lollipop firmware
Steve Giordano said:
For correct downgrade to lollipop, first you make a twrp backup and share it.
Your current version is L04-C432B805 ?
Guide to make a backup:
UNLOCK BOOTLOADER WITH MULTITOOL
Download
TWRP_2.8.7.0_EN_EMUI_4.0_v4.img
AND
ADB
Copy TWRP_2.8.7.0_EN_EMUI_4.0_v4.img in the adb folder,
turn off the device and boot into fastboot mode
in adb folder run cmd.exe as administrator and type these commands:
Code:
fastboot devices
If the device is recognized correctly displaying a series of numbers;
Then type
Code:
fastboot flash recovery TWRP_2.8.7.0_EN_EMUI_4.0_v4.img
fastboot reboot
Disconnect the USB cable and press volume up + power (press 8 - 10 seconds) to enter into recovery.
Into Recovery:
BACKUP (ALL)
After finish the backup you SHARE the folder TWRP (with the backup).
After this you flash a stock recovery and stock boot.img of b803 firmware
and install downgrade package for b803, after this, install Lollipop firmware
Click to expand...
Click to collapse
it says build number: L04_2015_1120_1100 .... what does this mean???
pudup said:
You need to use a downgrade package. It's a small 50kb zip file.
See here
http://pantomath.xyz/how-to-unbrick-honor-6-from-android-m/
Click to expand...
Click to collapse
i tried all the downgrade packages in this thread, but the installation fails at 36% every time,,, what shoud i do... please help
i also have a question.. i always put the update.app in the dload folder in SD card.. should i try to put it in internal storage.. will it differ or harm the phone ??
pudup said:
When I did my downgrade to unbrick my phone, j had put the small file in the internal storage and it worked fine. I had also put the full lollipop package on my sdcard because I had to do both together since i could only access the storages with twrp.
Everything worked for me and I'm on L04. If you're using L02 or L12 there was a thread somewhere here about downgrading.
Click to expand...
Click to collapse
i am L04 and tried to put it on internal storage and alos failed at 36%
i noticed that any downgrade fails at 36% and any upgrade (tried to 806, 807 and 810) all failed at 5%.. any eplanation or solution for this.. i'm afraid that when the official stable release comes out i won't be able to upgrade to it
pudup said:
Pull the marshmallow update.app file out and flash the boot.img and recovery.img and try again.
Click to expand...
Click to collapse
i don't know how to do this.. can you send me the files please. i appreciate your help.. thx
pudup said:
https://drive.google.com/folder/d/0B9EKeqAx6XkfRGdTVjlJQ1VyLUk/edit
Click to expand...
Click to collapse
i did flash boot.img and recovery.img and still downgrade failing at 36%.. what should i do now??
okay i was trying to wipe out my phone and i deleted every folder on the internal storage thinking it was my SD card
Now Am Stuck On Rescue Mode
Func No : 10 (FUNC_BOOT_KERNAL)
Error No : 2
the device is not listed when i try fastboot
and non of they key combinations seem to work please help me out
kaandaz said:
okay i was trying to wipe out my phone and i deleted every folder on the internal storage thinking it was my SD card
Now Am Stuck On Rescue Mode
Func No : 10 (FUNC_BOOT_KERNAL)
Error No : 2
the device is not listed when i try fastboot
and non of they key combinations seem to work please help me out
Click to expand...
Click to collapse
I have the same issue .. did you fix it or no ?
Sent from my ONE A2003 using XDA-Developers mobile app
Did you tried pressing just volume down button, and connect it to PC at the same time, after switching off? After switching off you merely have 3 to 4 seconds to connect to PC while holding vol down button.
Let me give you a step by step guide to flash the Stock ROM, please follow it.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Please report back if this works for you or not.
DigiGoon said:
Let me give you a step by step guide to flash the Stock ROM, please follow it.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Please report back if this works for you or not.
Click to expand...
Click to collapse
it doesn't connect to ADB , i do belive all the SW on it is erased is there any way i can reinstall ADB or recovery ?
kaandaz said:
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Please report back if this works for you or not.
it doesn't connect to ADB , i do belive all the SW on it is erased is there any way i can reinstall ADB or recovery ?
Click to expand...
Click to collapse
I had the same problem with my honor 7 which I eventually solved so lemme ask you a few questions...
Are you in bootloader mode constantly? (Is it with error or without error?)
Hard reset (power+vol down) boots into bootloader or bootloader with error message?
Have you tried a hard reset (hold down power UNTIL reboot) and quickly connecting your phone to a PC with vol down button held? (Of course let go of power as soon as a reboot)
Adb and fastboot are different things with different drivers so in fastboot mode you have to check
Fastboot devices
And
Adb devices only works if you are booted in android (and I guess twrp recovery).
Please lemme know all these things.
If you just want to install recovery, download latest firmware for your phone and use huawei update extractor to extract stock recovery from UPDATE.APP (which you get after extracting firmware using WinZip or some such software).
Boot into bootloader using power+vol down, connect to a PC and use adb to push
Fastboot flash recovery recovery.img
After copying recovery.img to platform-tools folder.
Sent from my PLK-L01 using XDA Labs
kaandaz said:
it doesn't connect to ADB , i do belive all the SW on it is erased is there any way i can reinstall ADB or recovery ?
Click to expand...
Click to collapse
Try this
- If you dont have, put a memory card in shmartphone
- I drew a full back to my rom, in this case a custom 6.9.1
- I put this full rom (zip file) on the memory card
- Through the TWRP did factory reset through the bootloader option
- Again by TWRP I chose installed the full rom had put the memory card
- He installed, I restart and voilá
Note that after doing this, it took a long time to set everything up. In the second logo of honor it took about 15 or 20 minutes.
guys , i can't get to use any of the key combinations , it just reboots non of the recovery ,fastboot or adb are working if i can flash any recovery i can mange the rest out , any ideas?
kaandaz said:
guys , i can't get to use any of the key combinations , it just reboots non of the recovery ,fastboot or adb are working if i can flash any recovery i can mange the rest out , any ideas?
Click to expand...
Click to collapse
If it keeps booting into error message bootloader or reboots without screen, you have to take it to Huawei customer service.
Had a similar problem with my phone and nothing could be done for 2,3 months until my son used it as a brick (before I could take it to customer service).
Tried every possible method here on XDA.
Sent from my PLK-L01 using XDA Labs
Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath
sampathnayak09 said:
Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath
Click to expand...
Click to collapse
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
How to return back to Stock Recovery & Install Stock Rom.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
@DigiGoon
@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img
@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
mahadikrs said:
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.
Click to expand...
Click to collapse
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.
muradulislam said:
@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.
Click to expand...
Click to collapse
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.
sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs
mahadikrs said:
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.
Click to expand...
Click to collapse
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.
muradulislam said:
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.
Click to expand...
Click to collapse
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0
DigiGoon said:
@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Hi,
I did flash the stock recovery, but my phone keeps rebooting and doesn't get into recovery mode.
I am sure it has sufficient battery charge. (Close to 90%).
Is there a way to do a clean install on Android phones? Like the way we install Windows OS on computers. Format hard disks, create partitions and then install a fresh OS?
Thanks
mahadikrs said:
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0
Click to expand...
Click to collapse
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?
sampathnayak09 said:
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?
Click to expand...
Click to collapse
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.
mahadikrs said:
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.
Click to expand...
Click to collapse
Thank you for providing the links. Let me try installing these.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
goldfinv said:
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs
Click to expand...
Click to collapse
Phone has 75% + charge as shown in TWRP recovery.
sampathnayak09 said:
Phone has 75% + charge as shown in TWRP recovery.
Click to expand...
Click to collapse
Maybe try flashing one of the custom EMUI ROMs via TWRP?
Sent from my H60-L04 using XDA Labs
@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
sampathnayak09 said:
@[email protected]@goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Give it a couple of tries. Users have suggested that it usually gets stuck somewhere but trying for 2,3 times gets the job done.
Sent from my PLK-L01 using XDA Labs
sampathnayak09 said:
@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Let me know which Rom version is your phone running now & which version you are trying to migrate to.
Also if 3 button Force update is not working then you can try the project menu option.
But first let me know what state your phone is currently in.
Hi. I was trying to install cm13 on my honor 8. I unlocked the bootloader, but while trying to install twrp recovery I think I deleted everything off the phone. The huawei erecovery doesn't work, and I tried sooooo many fastboot commands. I can't do adb commands. I can only get into fastboot mode. Is there anyway for me to get out of this? I tried flashing the system.img and boot.img from fastboot but it fails.
LuneTech said:
Hi. I was trying to install cm13 on my honor 8. I unlocked the bootloader, but while trying to install twrp recovery I think I deleted everything off the phone. The huawei erecovery doesn't work, and I tried sooooo many fastboot commands. I can't do adb commands. I can only get into fastboot mode. Is there anyway for me to get out of this? I tried flashing the system.img and boot.img from fastboot but it fails.
Click to expand...
Click to collapse
Was ur bootloader and frp in unlocked state ?
Sent from my KIW-L22 using Tapatalk
gopinaidu77 said:
Was ur bootloader and frp in unlocked state ?
Click to expand...
Click to collapse
Yes. And it still is
LuneTech said:
Yes. And it still is
Click to expand...
Click to collapse
So u can still recovery your phone
Sent from my KIW-L22 using Tapatalk
LuneTech said:
Hi. I was trying to install cm13 on my honor 8. I unlocked the bootloader, but while trying to install twrp recovery I think I deleted everything off the phone. The huawei erecovery doesn't work, and I tried sooooo many fastboot commands. I can't do adb commands. I can only get into fastboot mode. Is there anyway for me to get out of this? I tried flashing the system.img and boot.img from fastboot but it fails.
Click to expand...
Click to collapse
Hi, i have the exact same problem...
Have you figgerd it out?
Lucas Napik said:
Hi, i have the exact same problem...
Have you figgerd it out?
Click to expand...
Click to collapse
Yes. I installed a roll back update (something like that) by getting into the force update mode. After it finished, I had to then apply the full stock firmware. The problem was that I somehow put the firmware of another phone, because my model number was from a different Huawei phone.
trying to get back to stock
gopinaidu77 said:
So u can still recovery your phone
Sent from my KIW-L22 using Tapatalk
Click to expand...
Click to collapse
Hi. I got tired of CM13, so I tried to go back to stock. I checked a guide online which told me to flash 2 files using TWRP. after that, I lost twrp and now my bootloader is locked. What do I do? I manually did an update with the update.app file, and it says update success, but when it reboots it stays on the honor 8 screen, I waited for 25 minutes and it's still there.
LuneTech said:
Hi. I got tired of CM13, so I tried to go back to stock. I checked a guide online which told me to flash 2 files using TWRP. after that, I lost twrp and now my bootloader is locked. What do I do? I manually did an update with the update.app file, and it says update success, but when it reboots it stays on the honor 8 screen, I waited for 25 minutes and it's still there.
Click to expand...
Click to collapse
Try going into stock recovery and doing a factory reset after you use the update.app. You'll have to unlock the bootloader again and flash twrp if you want root.
Restoring to MM using a full image will typically lock the bootloader.
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
2 things, 1 is that there are 2 recovery files in the UPDATE.APP, and 2 is that I can't do a factory reset from the recovery, because it brings me to the erecovery and it doesn't give me the option to factory reset.
LuneTech said:
2 things, 1 is that there are 2 recovery files in the UPDATE.APP, and 2 is that I can't do a factory reset from the recovery, because it brings me to the erecovery and it doesn't give me the option to factory reset.
Click to expand...
Click to collapse
You need to hold VOLUME UP and POWER button with the phone off to get into the recovery to do a factory reset. Once the honor logo pops up, you can release the power and volume up buttons.
Recovery.img = Stock recovery
Recovery2.img = eRecovery
eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
I just did everything exactly the way you said. But it still stays at the honor boot logo. I don't mind waiting over night for it to boot up if I have to, but I've never had a phone take this long to boot up, even on first boot.
For a "brick" thread, it seems odd that the model is never mentioned so that someone can really point you to the right spot. If you keep going to erecovery, then it has to do with whether or not your cable is plugged in (likely you've been keeping it plugged in for your fastboot attempts, or that's a guess). I only go to erecovery with both up/down & power if the cable is plugged in. If I want to get to stock recovery (regardless of what the hell is in the "recovery" partition, TWRP, or who knows?) then I unplug it before trying any key combo from power off to get there.
Lastly, if you use this sort of thing as a template (I'm just going to use one for the frd-l09 as an example, but stick the right model in there for you) ::
Example to plug into Google to find your rollback with instructions:: site:consumer.huawei.com honor 8 frd-l09 rollback
Click to expand...
Click to collapse
So if you've got an frd-l04 then plug that in where frd-l09 is. It'll just look on the site consumer.huawei.com just above where the various country/variant breakdowns are, like US/ZH/HU/Etc. are.
Pick the one out that is closest to what it seems you want. All the pages are in the local languages so I'm guessing the .pdf that explains what to do is in the language you'll want as well.
Good luck:: Let us know what model phone you have.
More: Contents of first "intermediate" update.app is 8 image files. I'm sure the 2nd one that is specifically your own phone's version of b162 has a lot more files in it. I've not looked for awhile but I think it's 21 or 22 files. This is a two step process, first is all the crap that comes in update.app from the rollback page (just a 100K file which sets you up in intermediate state for rollback) and 2nd you find your exactly right b162 for your model phone, and pretty much repeat the process.
Yet More: One odd thing about the Honor 8: I've not seen it on other phones is the partition layout is not really "trustworthy" unless you really have gotten to understand it. There appears to be at least 3 or 4 places you can get to that I used to think would all have to be in the recovery partition, but apparently the Honor 8 works differently, so no matter how bleak your odds seem, .. maybe not. I got to both erecovery and stock recovery and rollback while TWRP was installed and it worked just following the directions from their website.
Agreed on this thing.
eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
Thank you very much, you saved me and my phone !!!
I made a mistake: my phone was under android m and I flashed by mistake the rollback update (to go m from n), then my honor was bricked on bootloop, no recovery, no update by dload....nothing worked....
Your solution was the right one !! again thank you very much
Interesting observation with the eRecovery (recovery2 partition). So I have TWRP installed, the system partition modified and user storage not encrypted. I was still able to to use eRecovery to connect to WiFi and download the factory image and it automatically repaired the phone to factory state. I noticed it doesn't re-lock the bootloader afterward. This seems to be the easiest method to unbrick.
Getting into eRecovery.
hi! Or extract the files? sorry for my english
eksasol said:
It happened to me too, it is possible you still didn't use the right image.
This is how I recovered mine:
1. Go here to download the latest firmware for your model: https://www.androidfilehost.com/?w=files&flid=129406
2. Use the Huawei Update Extractor to extract files from the "Update.app". (Ignore the 'profile' drop down list in the app.)
3. Unlock your phone's bootloader.
4. Flash these four images (extracted using the tool from step 2):
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
5. Boot into recovery and do a factory reset. This is needed to reformat the internal storage (and make it encrypted I think). (Power+Vol Up)
6. Put the Update.app file inside the "dload" folder in your SDcard.
7. Boot into flash mode to let the phone flash the Update.app (Power+Vol Up+Vol Down).
Click to expand...
Click to collapse
Ok after the factory reset (which is peppered with mounting errors)...
failed to mount /data (invalid arguments)
unable to mount storage
When I try to flash cust.img and system.img they both fail.
I cannot check what firmware I was on before I started all this, but I believe it was the latest one. This is a FRD-04. I flashed TWRP 3.1.0.1 erecovery and I can access it and fastboot.
I have tried various different things and nothing I do can unbrick the phone. Any help would be appreciated.
menriquez said:
Ok after the factory reset (which is peppered with mounting errors)...
failed to mount /data (invalid arguments)
unable to mount storage
When I try to flash cust.img and system.img they both fail.
I cannot check what firmware I was on before I started all this, but I believe it was the latest one. This is a FRD-04. I flashed TWRP 3.1.0.1 erecovery and I can access it and fastboot.
I have tried various different things and nothing I do can unbrick the phone. Any help would be appreciated.
Click to expand...
Click to collapse
have the same problem as you on my FRD-09.
I don't have this phone anymore, but the easiest way I find to restore it is using eRecovery.