I just have the problem that I may have bricked my LG G Stylo MS631. I had factory reset it after I found it on the side of the road, and upon booting it back up, it had Factory Reset Protection asking me to login. Somehow my friend managed to flash a firmware file from his PC, but it was the wrong file, so it wound up bricked. He did this twice more after unbricking it, but after the third, he was unable to unbrick it and he handed it back to me. So now I'm here. I cant boot the phone up, I cant get into download mode, but when I connect it to my PC, (Windows 10), it thinks for a second, then displays an error about the last USB device I plugged in was not recongnized by windows and may be damaged. Any ideas on what to do to fix this absurdly huge phone?
matthewsolc66 said:
I just have the problem that I may have bricked my LG G Stylo MS631. I had factory reset it after I found it on the side of the road, and upon booting it back up, it had Factory Reset Protection asking me to login. Somehow my friend managed to flash a firmware file from his PC, but it was the wrong file, so it wound up bricked. He did this twice more after unbricking it, but after the third, he was unable to unbrick it and he handed it back to me. So now I'm here. I cant boot the phone up, I cant get into download mode, but when I connect it to my PC, (Windows 10), it thinks for a second, then displays an error about the last USB device I plugged in was not recongnized by windows and may be damaged. Any ideas on what to do to fix this absurdly huge phone?
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
Related
I tried almost everything up until now. No luck.
Method 1) The Vol key combinations to reset from here:
windowsphone.com/en-in/how-to/wp8/settings-and-personalization/reset-my-phone
Every time i tried this, the phone would restart in between and bring me back to the bitlocker screen.
Method 2) Windows Device Recovery Tool
This tool doesn't detect my phone on any screen except one where i get this:
dropbox.com/s/57fggj7erw3suf1/2016-01-05.png?dl=0
Method 3) Nokia Care Suite
This actually took some time to get. And then i had to make some changes in the preferences for it to read the firmware i had downloaded earlier using WDRT.
Then
File-> Open Product-> Lumia 525-> Programming-> Recovery
Then selected no connection at the top left corner for dead usb flashing.
Selected my firmware and hit start.
And then it started
dropbox.com/s/m008m6tiy5lcmkf/2016-01-05%20%281%29.png?dl=0
And it tried to reboot the phone.
I got the big NOKIA logo at the top of the screen. [FINGERS CROSSED!]
And then i got the Red NOKIA screen. And then,
It disappeared. And i got an error message on NCS.
dropbox.com/s/t2mcagie39aeifg/2016-01-05%20%282%29.png?dl=0
Here's the full error log. Just in case.
FA_ERR_VERIFY_FAIL: 0xFA00000D
Exception:
Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.MurzimProgrammingException: FA_ERR_VERIFY_FAIL: 0xFA00000D
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__c(Object state)
Click to expand...
Click to collapse
The thing is, all of this happened on it's own. I didn't enable bitlocker nor did anything with any WiFi proxy settings.
And when i took it to nokia care, they told me that there was some fault in the motherboard and IT or a part of IT needs to be replaced and i was given a quoted price for the replacement.
Now i'm pretty convinced that all of this is just a software mess up and nothing more. Any ideas people?
Anything that i might not have done? Or maybe done incorrectly?
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you
___
v7
XDA Assist
I recently bricked my lg risio trying to flash something. when i turn it on it shows the LG logo and says security error and then shuts down. i tried putting it download mode. My computer detects it but will not allow me access to what is on the phone. I gave up and tried to factory reset it, only to see the same error screen. I rooted and installed mods on my old HTC before, but have since forgotten this lengthy process. Someone please help. Thank you
Shamarermac12 said:
I recently bricked my lg risio trying to flash something. when i turn it on it shows the LG logo and says security error and then shuts down. i tried putting it download mode. My computer detects it but will not allow me access to what is on the phone. I gave up and tried to factory reset it, only to see the same error screen. I rooted and installed mods on my old HTC before, but have since forgotten this lengthy process. Someone please help. Thank you
Click to expand...
Click to collapse
Hi,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly].Experts there may be able to help you.
Good luck
Hi My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
chaotic_mind said:
Hi My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
so my mem. on my phone was almost to the point of full so i decided to debug and remove some non used files and apks and got em off then went to reset without backing up app and user data....needless to say the phone turned off attempted to come back on but always completely hangs up on the green 2D android logo (the first thing you seewhen powering on before sprint in yellow comes across) anyways, i can access FTM and when i plug it into comp. i hear the connected oise but my phone isnt anywhere to be found on the computer....its rooted by the way someone please help somehow if at all possible
nitsuddeer said:
so my mem. on my phone was almost to the point of full so i decided to debug and remove some non used files and apks and got em off then went to reset without backing up app and user data....needless to say the phone turned off attempted to come back on but always completely hangs up on the green 2D android logo (the first thing you seewhen powering on before sprint in yellow comes across) anyways, i can access FTM and when i plug it into comp. i hear the connected oise but my phone isnt anywhere to be found on the computer....its rooted by the way someone please help somehow if at all possible
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
I recently rooted a VERIZON LG G VISTA VS880 running Android 5.1.1 (Lollipop) using KingRoot. I decided to remove some bloatware, now that my phone is rooted. After that, I tried to restart my phone but when it was going to boot back up, I got slapped across the face with an odd message. Every time I try and turn it on, the screen reads, "Start Up Failed. Your device didn't start up Successfully. Use the Verizon Software Repair Assistant (which I don't have and don't know how to get without my phone working) on a computer to repair your device. Connect your device to your computer to get the Verizon Software Repair Assistant (Nothing happens). [Authentication Fail #9] [MODIFIED]". I have tried factory resetting it and wiping the cache, which are the only two options from download mode that seemed like they would help. I have also tried connecting it to my computer and searching online for help. I really need some help guys. Any help is much appreciated. Thank you very much.
JoseQuintero831 said:
I recently rooted a VERIZON LG G VISTA VS880 running Android 5.1.1 (Lollipop) using KingRoot. I decided to remove some bloatware, now that my phone is rooted. After that, I tried to restart my phone but when it was going to boot back up, I got slapped across the face with an odd message. Every time I try and turn it on, the screen reads, "Start Up Failed. Your device didn't start up Successfully. Use the Verizon Software Repair Assistant (which I don't have and don't know how to get without my phone working) on a computer to repair your device. Connect your device to your computer to get the Verizon Software Repair Assistant (Nothing happens). [Authentication Fail #9] [MODIFIED]". I have tried factory resetting it and wiping the cache, which are the only two options from download mode that seemed like they would help. I have also tried connecting it to my computer and searching online for help. I really need some help guys. Any help is much appreciated. Thank you very much.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist