[Completed] lenovo A680_row soft brick phone - XDA Assist

Hi My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!

chaotic_mind said:
Hi My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist

Related

[Completed] Alcatel 5020 Flashing Problems

Hello,
i tried flashing my Alcatel 5020x with SP Flash tool today. I tried once and everything went well except that it got stuck at the boot logo.
i then decided to format all except bootloader. The phone does not at all respond to anything after that. When plugged into computer or power it just has its led indicator on.
The PC does not detect it with or without battery. Not even any plug in/out sound on the PC.
I've tried different ports, uninstall drivers etc, nothing works. :crying:
Please Help!
If someone knows Test Point method for this device then please share!
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Thread closed / Duplicate

[Completed] bricked huawei media pad 10fhd

hi there,am having trouble with my huawei media pad 10fhd that i installed a wrong firmware on now it boots to a white screen. i have tried holding all buttons to get to recovery and find a way out but it can only boot into fastboot and my computer cant detect it in fastboot,have installed adb drivers and on console manager its detected but on fastboot command there is no device any help please
jonathan.eram said:
hi there,am having trouble with my huawei media pad 10fhd that i installed a wrong firmware on now it boots to a white screen. i have tried holding all buttons to get to recovery and find a way out but it can only boot into fastboot and my computer cant detect it in fastboot,have installed adb drivers and on console manager its detected but on fastboot command there is no device any help please
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist

[Completed] OOOHH NOOOOOO!!!! zte n800 flatlined?? or did it?

so my mem. on my phone was almost to the point of full so i decided to debug and remove some non used files and apks and got em off then went to reset without backing up app and user data....needless to say the phone turned off attempted to come back on but always completely hangs up on the green 2D android logo (the first thing you seewhen powering on before sprint in yellow comes across) anyways, i can access FTM and when i plug it into comp. i hear the connected oise but my phone isnt anywhere to be found on the computer....its rooted by the way someone please help somehow if at all possible
nitsuddeer said:
so my mem. on my phone was almost to the point of full so i decided to debug and remove some non used files and apks and got em off then went to reset without backing up app and user data....needless to say the phone turned off attempted to come back on but always completely hangs up on the green 2D android logo (the first thing you seewhen powering on before sprint in yellow comes across) anyways, i can access FTM and when i plug it into comp. i hear the connected oise but my phone isnt anywhere to be found on the computer....its rooted by the way someone please help somehow if at all possible
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist

[Completed] Bricked LG G Stylo MS631

I just have the problem that I may have bricked my LG G Stylo MS631. I had factory reset it after I found it on the side of the road, and upon booting it back up, it had Factory Reset Protection asking me to login. Somehow my friend managed to flash a firmware file from his PC, but it was the wrong file, so it wound up bricked. He did this twice more after unbricking it, but after the third, he was unable to unbrick it and he handed it back to me. So now I'm here. I cant boot the phone up, I cant get into download mode, but when I connect it to my PC, (Windows 10), it thinks for a second, then displays an error about the last USB device I plugged in was not recongnized by windows and may be damaged. Any ideas on what to do to fix this absurdly huge phone?
matthewsolc66 said:
I just have the problem that I may have bricked my LG G Stylo MS631. I had factory reset it after I found it on the side of the road, and upon booting it back up, it had Factory Reset Protection asking me to login. Somehow my friend managed to flash a firmware file from his PC, but it was the wrong file, so it wound up bricked. He did this twice more after unbricking it, but after the third, he was unable to unbrick it and he handed it back to me. So now I'm here. I cant boot the phone up, I cant get into download mode, but when I connect it to my PC, (Windows 10), it thinks for a second, then displays an error about the last USB device I plugged in was not recongnized by windows and may be damaged. Any ideas on what to do to fix this absurdly huge phone?
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist

[Completed] LG Tribute 2 Bricked

Please help me, I might be in the wrong place for this but, I think i bricked my LG tribute 2 ls665 for boost mobile. When i power it on it shows the Lg logo for 30 seconds, then reboots to the android on its back with the red ! triangle. At the bottom of the screen it says no command. I can still get into the stock recovery and tried everything in there but to no avail. When i try to go to download mode it says secure booting error error code:1003, then restarts the phone. Any help on this issue will be greatly appreciated.
ksukume said:
Please help me, I might be in the wrong place for this but, I think i bricked my LG tribute 2 ls665 for boost mobile. When i power it on it shows the Lg logo for 30 seconds, then reboots to the android on its back with the red ! triangle. At the bottom of the screen it says no command. I can still get into the stock recovery and tried everything in there but to no avail. When i try to go to download mode it says secure booting error error code:1003, then restarts the phone. Any help on this issue will be greatly appreciated.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
__
v7
XDA Assist

Categories

Resources