hi there,am having trouble with my huawei media pad 10fhd that i installed a wrong firmware on now it boots to a white screen. i have tried holding all buttons to get to recovery and find a way out but it can only boot into fastboot and my computer cant detect it in fastboot,have installed adb drivers and on console manager its detected but on fastboot command there is no device any help please
jonathan.eram said:
hi there,am having trouble with my huawei media pad 10fhd that i installed a wrong firmware on now it boots to a white screen. i have tried holding all buttons to get to recovery and find a way out but it can only boot into fastboot and my computer cant detect it in fastboot,have installed adb drivers and on console manager its detected but on fastboot command there is no device any help please
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
Related
Hi My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
chaotic_mind said:
Hi My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
need help with this phone. I rooted it using Kingo, followed some instructions to set up a partition and then did a factory reset/wipe.
now the phone is stuck in a boot loop. Droid stood up with blue cage spinning and progress bar above.
The phone wont go into recovery mode or download mode either so most of the tutorials ive seen are fairly useless to me and the only other i have come across intended for "noobs" goes on about scripts and adb - both of which i have no idea about.
Is there a way I can just get the phone back to factory default?
naffnaff said:
need help with this phone. I rooted it using Kingo, followed some instructions to set up a partition and then did a factory reset/wipe.
now the phone is stuck in a boot loop. Droid stood up with blue cage spinning and progress bar above.
The phone wont go into recovery mode or download mode either so most of the tutorials ive seen are fairly useless to me and the only other i have come across intended for "noobs" goes on about scripts and adb - both of which i have no idea about.
Is there a way I can just get the phone back to factory default?
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
Please help me, I might be in the wrong place for this but, I think i bricked my LG tribute 2 ls665 for boost mobile. When i power it on it shows the Lg logo for 30 seconds, then reboots to the android on its back with the red ! triangle. At the bottom of the screen it says no command. I can still get into the stock recovery and tried everything in there but to no avail. When i try to go to download mode it says secure booting error error code:1003, then restarts the phone. Any help on this issue will be greatly appreciated.
ksukume said:
Please help me, I might be in the wrong place for this but, I think i bricked my LG tribute 2 ls665 for boost mobile. When i power it on it shows the Lg logo for 30 seconds, then reboots to the android on its back with the red ! triangle. At the bottom of the screen it says no command. I can still get into the stock recovery and tried everything in there but to no avail. When i try to go to download mode it says secure booting error error code:1003, then restarts the phone. Any help on this issue will be greatly appreciated.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
__
v7
XDA Assist
Tried flashify to add custom recovery but didn't work, now I have no recovery mode on my phone and my backup apparently didn't save right so I can't go back. Tried computer way to unlock bootloader, hoping that would help the recovery install correctly, but after it boots my phone into bootloader I type the next command and it just continues to say waiting for device and my phone then boots the rest of the way up. Please help.
Phone Model # 5017B
Alcatel
Also says: Pixi3454GSPR
Lollipop 5.1.1
Bootloader#: L3ACF0F0BR00
I had pics on here of my device info, but they're saved to google drive and I'm a noob so I can't post outside links.
Using Editor to fix missing recovery image in SysCtl/VM
androidcurious16 said:
Tried flashify to add custom recovery but didn't work, now I have no recovery mode on my phone and my backup apparently didn't save right so I can't go back. Tried computer way to unlock bootloader, hoping that would help the recovery install correctly, but after it boots my phone into bootloader I type the next command and it just continues to say waiting for device and my phone then boots the rest of the way up. Please help.
Phone Model # 5017B
Alcatel
Also says: Pixi3454GSPR
Lollipop 5.1.1
Bootloader#: L3ACF0F0BR00
I had pics on here of my device info, but they're saved to google drive and I'm a noob so I can't post outside links.
Click to expand...
Click to collapse
I know I can use build.prop editor or system file editor to fix recovery image issue, what items do I need to change and what do I change them to... Thanks in advance.
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
__
v7
XDA Assist
i got those tablets and they are stuck in bootloop i can not find device in adb nor fastboot? drivers installed automatically when i plugged it in with fastboot
XDA Visitor said:
i got those tablets and they are stuck in bootloop i can not find device in adb nor fastboot? drivers installed automatically when i plugged it in with fastboot
Click to expand...
Click to collapse
Hi and welcome to XDA.
There is no dedicated forum for your device here. Try posting your query in:
Android Q&A,Help and Troubleshooting.
You'll have to create an account to post in the main forums. Please try to add some more details about your device to make it easier for people to help.
Good luck