Hey guys m back after long time
I ported Miui7 rom for our karbonn a12* n its working grt till now
special thanks to Arif Rayeen for giving Miui rom to me....
download MIUI7 link: https://drive.google.com/file/d/0BxQZF8lqd-BHSzg4WWtaN1NhT0k/view?usp=sharing
Patch:https://drive.google.com/file/d/0BxQZF8lqd-BHNHZ3NWMtNDJBUUk/view?usp=sharing
Installation Guide:
Download the MIUI7 rom N patch place it on ur Sdcard
Go to recovery mode
Wipe data/factory reset
Take backup of ur Stock rom (Optional)
Select install zip from sdcard
Select MIUI7 n wait for it to install
it will take around 10-15mins max so jst wait
after installation sucessfull
Install Patch as zip from sdcard
after installing both jst go back n reboot system now
Wait for 10-15 mins to boot up (first boot takes time)
Volla MIUI7 sucessfully installed Enjoy...:good:
New working link of PhilZ recovery: https://drive.google.com/file/d/0BxQZF8lqd-BHaE8yRGtUekI0Snc/view?usp=sharing
Related
Dear Sir,
When i started to install Revolution ICS HD in to my Sony Xperia Arc S
As per Instruction i done all
-------------------------------------------------------------------------------------------------------------
Reboot into Clockwordmod Recovery-----yes
•Factory Reset--done
•Wipe Cache Partition---done
•Advanced>Wipe Dalvik Cache--done
•Mounts and storage > Format /system--done
•Install zip from sdcard> Choose zip from sdcard> Revolution_ics_hd_part 1.zip--done
•Follow the Instructions in Aroma Installer--done
-=----------------------------------------------------------------------------------------------------------------
i clicked install..........after the completion of Aroma installer the system automatically Rebooted..
But not yet booted
after the logo Sony...it is going to blink black screen.....
i tried lot of times
it is not going to Boot...
Blinking Sony....itself
plz give me any idea......to how to restart my phone.....!!!!!!!
i found below instruction from the same page
""
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
""
So i downlod patch file from my Pc
.........................................................
Now what i want to do.,........
my xperia arc s is ...now blinking Sony.........logo only....
not booting
plz give me some idea...
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
raeeskk said:
Dear Sir,
When i started to install Revolution ICS HD in to my Sony Xperia Arc S
As per Instruction i done all
-------------------------------------------------------------------------------------------------------------
Reboot into Clockwordmod Recovery-----yes
•Factory Reset--done
•Wipe Cache Partition---done
•Advanced>Wipe Dalvik Cache--done
•Mounts and storage > Format /system--done
•Install zip from sdcard> Choose zip from sdcard> Revolution_ics_hd_part 1.zip--done
•Follow the Instructions in Aroma Installer--done
-=----------------------------------------------------------------------------------------------------------------
i clicked install..........after the completion of Aroma installer the system automatically Rebooted..
But not yet booted
after the logo Sony...it is going to blink black screen.....
i tried lot of times
it is not going to Boot...
Blinking Sony....itself
plz give me any idea......to how to restart my phone.....!!!!!!!
i found below instruction from the same page
""
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
""
So i downlod patch file from my Pc
.........................................................
Now what i want to do.,........
my xperia arc s is ...now blinking Sony.........logo only....
not booting
plz give me some idea...
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
Click to expand...
Click to collapse
your phone has gone into bootloop i.e. it is soft bricked
search for an unbrick tutorial in ur device's forum!!
you should make a nandroid backup through clockworkmod before flashing a rom!
Not yet solved the booting problem...my xperia arc s
js2892 said:
your phone has gone into bootloop i.e. it is soft bricked
search for an unbrick tutorial in ur device's forum!!
you should make a nandroid backup through clockworkmod before flashing a rom!
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------
Sir,
Yesterday i tried some unbrick tutorial in this website,
finally i got one Xperia_2011_FreeXperia_ALL.ftf ..
so flash this firmware using flashing tool...its successul
But then also not yet started my phone..
still blinkung sony logo...and black screen.
then i tried SUS (Sony Update Service Setup)
But it explain me after the checking that....."" you have latest software installed ""
So plz anyone give me Idea.
If i give to service centre ..they will charge payment...becoz sometimes its warranty is voided..
also it will take 1 week..
So,,,plz help me
there should be an option at SEUS for repair.
Try PC companion.
martirio3000 said:
there should be an option at SEUS for repair.
Try PC companion.
Click to expand...
Click to collapse
i tried again using Pc companion
but it tolds that you have the latest software installed
Hello guys...
I just want to share my 1st boot logos...This was made by me and I gave effort to do all of this ^_^
I made it flashable zip to install it easily using CWM recovery or other custom recoveries..
Note: this won't brick your device but flash this at your own risk...
Guide on flashing this:
1. Reboot to your custom recovery
2. Do install zip from sdcard
3. Choose your desire zip that contains the logo
4. Wait until the flashing complete
5. Reboot system now and see the changes
==============1st Boot Logos================
Hi
PRESENTING STOCK BOOT LOGO FOR MMX A110
SOMETIMES IT HAPPENS AFTER FLASHING SOME CUSTOM ROM IF U RESTORED BACK TO STOCK THE BOOT LOGO OF CUSTOM ROM REMAINS LOTS OF TRY CAN'T ABLE TO REMOVE IT THERE MAY BE CHANCES OF BRICK YOUR FON SO HERE IS THE SOLUTION FOR THAT JUST FLASH THIS FILE THROUGH CWM & U WILL GET BACK THE STOCK LOGO
This logo extract by me & converted to cwm flashable file
FLASHING PROCEDURE
WIPE CACHE/DALVIK
FIX PERMISSION
INSTALL ZIP FROM SD
DOWNLOAD LINK:- http://www.4shared.com/zip/WSPyNw7Hba/BootLogo.html
Hit thanx if u like it which will help me to post more things for u
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
AndroMen said:
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
Click to expand...
Click to collapse
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
SmartDrevil said:
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
Click to expand...
Click to collapse
Thnx m8.
Btw i figured out how to flash Huawei stock recovery and then update.app.
Phone it's just like new out of box:laugh::laugh::laugh:
*Note*-Please Use this Method Only On ROW Rom Version.Flashing On CN Rom May Brick your Device.......
First Download ROM and Save it to Root Directory (link below)
1. Go to Play Store and Download Official TWRP app
2. Download recovery.img (link below) and Flash Using TWRP app
3. Completely Switch Off Your Phone wait for 10 secs. Now Press Both Volume Key(VOL+ and VOL-) and Power Key together.
It Will Boot you In Recovery Mode.
4. Make Backup Of Current Rom By Clicking on Backup Button
5. after making backup Clear/Format cache,Format data ,Format system(don't select internal memory)
6. Now Click On Install and Select Install zip file from SD Card(that you downloaded)and Swipe For Flashing.
it will take 5 Minutes For Install and 5 Minutes For 1st Boot
7. Enjoy
Downloads-
ROM- goo.gl/TEwZL1
TWRP (recovery.img)- goo.gl/Fgj9b4
*Use at Your Own Risk*
after flash twrp recovery img..... accidentally i click on FASTBOOT MODE.......
after flash twrp recovery img..accidentally i click on FASTBOOT MODE.......
THEN IT ONLY SHOWS =>FASTBOOT mode..... n my lenovo s850 is not opening.
please help me to get back my phone .
Solution
Wait till battery drains to 0% or you can try this method- goo.gl/Ww31cm . Reply if still problem not solved... Don't panic
Solved
TufelRT said:
Wait till battery drains to 0% or you can try this method- goo.gl/Ww31cm . Reply if still problem not solved... Don't panic
Click to expand...
Click to collapse
thanxx a lot...btw cant download the miui 8 from the above link......and is it stable ...kindly please inform.
N is there any other stable custom rom for lenevo s850 ?
i wanna use android naught
please help.
Checked
I've checked link and it is working properly. ROM is Weekly beta. I've seen nougat ROM for s850 but I didn't tested...
Eror
In my s850 it was saying unable to execute update binary in zip ? it was not coming pls say a solution for this
Please Download zip file from my link given in thread....