Hello guys...
I just want to share my 1st boot logos...This was made by me and I gave effort to do all of this ^_^
I made it flashable zip to install it easily using CWM recovery or other custom recoveries..
Note: this won't brick your device but flash this at your own risk...
Guide on flashing this:
1. Reboot to your custom recovery
2. Do install zip from sdcard
3. Choose your desire zip that contains the logo
4. Wait until the flashing complete
5. Reboot system now and see the changes
==============1st Boot Logos================
Hi
Related
Installing CWM Recovery or TWRP recovery to your Phone Voids warranty and I am not Responsible For any
Damage to your phone do at your own risk...
you need to root first you mobile..(google it how to root micromax 3d)
than follow steps
hey guys u need to install custom recovery to install custom rom our device..
Download the CWM Recovery. (from below)
Rename it to recovery.img and transfer it to your sdcard.
Download MobileUncle MTK Tools from play store. or google it
Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
Your phone will reboot into the cwm recovery. you get the custom recovery in your mobile....
and i also attached twrp custom recovery
please hit thanks to appreciate my work....
port 4.4 for 3d
DGEEEK said:
Installing CWM Recovery or TWRP recovery to your Phone Voids warranty and I am not Responsible For any
Damage to your phone do at your own risk...
you need to root first you mobile..(google it how to root micromax 3d)
than follow steps
hey guys u need to install custom recovery to install custom rom our device..
Download the CWM Recovery. (from below)
Rename it to recovery.img and transfer it to your sdcard.
Download MobileUncle MTK Tools from play store. or google it
Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
Your phone will reboot into the cwm recovery. you get the custom recovery in your mobile....
and i also attached twrp custom recovery
please hit thanks to appreciate my work....
Click to expand...
Click to collapse
port android kitkat
PRESENTING STOCK BOOT LOGO FOR MMX A110
SOMETIMES IT HAPPENS AFTER FLASHING SOME CUSTOM ROM IF U RESTORED BACK TO STOCK THE BOOT LOGO OF CUSTOM ROM REMAINS LOTS OF TRY CAN'T ABLE TO REMOVE IT THERE MAY BE CHANCES OF BRICK YOUR FON SO HERE IS THE SOLUTION FOR THAT JUST FLASH THIS FILE THROUGH CWM & U WILL GET BACK THE STOCK LOGO
This logo extract by me & converted to cwm flashable file
FLASHING PROCEDURE
WIPE CACHE/DALVIK
FIX PERMISSION
INSTALL ZIP FROM SD
DOWNLOAD LINK:- http://www.4shared.com/zip/WSPyNw7Hba/BootLogo.html
Hit thanx if u like it which will help me to post more things for u
Hello guys i need some help from other developers in here. I have a problem on my samsung galaxy duos s7582. My problem is, i'm about to install a zip file on cwm recovery, first i go to install zip, then choose from sdcard1, but when i'm on the zip file that i want to install, it will only go back to back the cwm based recovery wherein you choose to install zip, reboot system, wipe data/factory etc. I did it again and again but it will just go back. What am i going to do ? Please help. (I'm installing a custom rom)
Hi
Thanks for writing to us at XDA Assist.
TWRP is the recommended custom recovery. Give it a try: http://forum.xda-developers.com/s7582/general/recovery-twrp-2-8-touch-recovery-t3040680
Good luck.
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
AndroMen said:
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
Click to expand...
Click to collapse
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
SmartDrevil said:
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
Click to expand...
Click to collapse
Thnx m8.
Btw i figured out how to flash Huawei stock recovery and then update.app.
Phone it's just like new out of box:laugh::laugh::laugh:
Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM