Related
I recently picked up a Pantech Burst phone from At&t, and upgraded to ICS. I then proceeded to root the phone using the prestoroot.img method and it worked. Everything was running dandy until I got the VM Heap tool app and(stupidly) set the vm heap to 52m and attempted to reboot... It failed and all I got was a loop of boot up animations. I tried several times to reboot, and then tried to boot to recovery mode and factory reset. That worked, but it STILL didnt reboot..! I dont have a backup, and whenever i try to " Install update from external storage", it just fails over and over again. I found thestock firmware and downloaded it to my external sd card and install(still to no success). Im only 13 and cant afford a new phone! PLEASE SOMEONE HEEEELLLLPPPPPP!!!!!!!!!!!!!
Use P9070_Download_Tool_v3.3.zip and flash PRESTO_BIN_JUUS09032012_TP20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread Pantech Burst Essentials.
I love you!!!!!!!
dvinelord said:
use p9070_download_tool_v3.3.zip and flash presto_bin_juus09032012_tp20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread pantech burst essentials.
Click to expand...
Click to collapse
it workkeed!!!!!:d
DvineLord said:
Use P9070_Download_Tool_v3.3.zip and flash PRESTO_BIN_JUUS09032012_TP20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread Pantech Burst Essentials.
Click to expand...
Click to collapse
I bricked my phone few days back doing restore from CWM 6 downloeded online from ROM manager,
I wiped cache dalvik etc & rebooted, I could see the Tap the android screen then suddenly blank now it wont start
I get QHSUSB_dload in PC device manager any way out
I tried this method but I dont get the download button to click it remains greyed out.
Is there any driver for QHSUSB_dload?
Or do I have no hope at the moment or in near future?
just don`t use ROM manager for installing recovery . usually the result is bricked phone
Yah, i remember a fastboot brick i got from rom manager (LG Optimud ME)
Sent from a 2.8 inch screen
I also just bricked my Pantech Burst the same way...using ROM Manager. Is there a way to fix this or am I out of luck? I did try the method posted at the top of this thread. It just gets locked in the S/W Upgrading screen. Any help will be greatly appreciated.
I'm too in same situation.....i tried it updating via Pantech OS Upgrade tool......it updates successfully but doesnot bootup....
and now it shows some S/W Upgrading with red colour background
plz help me out:crying::crying::crying::crying::crying:
coolamjadkhan said:
I'm too in same situation.....i tried it updating via Pantech OS Upgrade tool......it updates successfully but doesnot bootup....
and now it shows some S/W Upgrading with red colour background
plz help me out:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Mine did not upgrade successfully, but I have the exact same problem. On day three of waiting for a callback from Pantech on the issue. They are supposedly talking to the techs in Korea about it.
Maybe solved!
tajlund said:
Mine did not upgrade successfully, but I have the exact same problem. On day three of waiting for a callback from Pantech on the issue. They are supposedly talking to the techs in Korea about it.
Click to expand...
Click to collapse
Don't know if this is going to help, but I had the problem (as I described) red S/W Upgrading and couldn't do anything. Well, after about two weeks of sitting with the battery out, I decided to redownload and rerun the Pantech update app, and lo and behold, it fixed my phone. It also installed a more up to date version of Android 4.0, I went from 4.01 to 4.04.
This is after running the updater a good 30 or so times the past two weeks hoping for anything to work, now today, bam, it works fine.
I would recommend anyone in this situation give the most recent updater a try, it may solve your problem.
need help with my burst!!!!!
Hey! i have a pantech burst and i love it! but i had to reset it and now it wont work. my exhusband root it a few months ago....and he deleted the keyboard and the launcher..... so.... when i turn it on i cant do anything cause i cant write .... and if i skip the android start menu i cant see anything cause i dont have a launcher.... please someone help! what can i do?
:crying: Bricked my phone total unable start. any hardware diagnostic tool or manual reset button.
please help urgently
needhelppantech said:
Hey! i have a pantech burst and i love it! but i had to reset it and now it wont work. my exhusband root it a few months ago....and he deleted the keyboard and the launcher..... so.... when i turn it on i cant do anything cause i cant write .... and if i skip the android start menu i cant see anything cause i dont have a launcher.... please someone help! what can i do?
Click to expand...
Click to collapse
would you like to sell it cheaper rate???
Bricked Pantech Burst Stuck in S/W Downloading Mode and completely wiped ...
Ok I am having a similar issue guys. Last night I had to wipe my phone because it was overly full and I switched providers and the phone had become unusable. I tried using clockworkmod to do this and it wiped everything ( including clockworkmod. ) Now I only get a S/W Upgrading screen with a red box. I tried using the pantech download tool and the PANTECH_PRESTO_BIN_JUUS03122012.pdl file. It did appear that it was installing it but then it became stuck at the very very very end of things. I basically had to take the battery out to do anything at all as I had left the phone on all night to download the pdl file but without any luck.
When I reboot the phone it had the S/W Upgrading mode with the red screen. I've tried all of the different key combinations on the pantech burst etc volume up + volume down and power, volume down + power, volume up + power. None of these things will reboot the phone.
I am hoping I can use the pantech download tool to install a different pdl instead and possibly get it working that way. I know that when the phone is off if I plug it into usb then the screen lights up on it with the S/W Upgrading screen and the red box. If I press the power button or any other combinations of buttons + the power button it also does this. It literally will not do anything else.
I cannot use pantech pc suite because the phone originally was so unusable I could not put the android apk file on the phone even though I have it on my laptop.
I tried using adb and fastboot and it will not even find my device through ANY usb port on the laptop. I've tried deleting and reinstalling the drivers over and over. The only thing I know to do is reboot afterward and hopefully it will find my phone on usb with adb. If I can just get to a bootloader or flash functional firmware onto this phone I think I could get it working but I do not know enough about the pantech burst to try physically jumping anything on it in order to hard reset it.
So my only options right now look like maybe get a different pdl, possibly reboot and the drivers may find my phone, or JTAG this thing.
I can't put it in usb debugging mode because it won't boot. Since adb does not even find the device as being attached it seems as if this phone should be operating in a different port mode or something to make it visible. I could be wrong but I am hoping that rebooting fixes the driver issue and makes the phone visible.
I tried PDAnet also and once again it does not work because it cannot find the device. This could be a usb cable issue I suppose but I only have this particular cable I am pretty sure
I might try another cable as well...
Any other ideas ? Am I going to have to JTAG this thing or should it be fixable using the download tool and a different pdl ? Or do I need to find another way to completely wipe the phone first and THEN use the download tool with the pdl file ?
It does get a bit confusing with so many mods, roms, and methods to recover android phones. If I can get the phone to boot then I can reload my backups and all should be well. I do need this phone for business purposes also. Any ideas guys ?
PS> I am also pretty decent with linux distros like arch or ubuntu so I would like to also know if it would just be better to do this in linux and possibly use linux to manually switch the phone to a different device mode to make it visible in the instance of there being nothing wrong with the drivers.
Thanks for any ideas or suggestions ...
UPDATE - progress ???
dsull1981 said:
Ok I am having a similar issue guys. Last night I had to wipe my phone because it was overly full and I switched providers and the phone had become unusable. I tried using clockworkmod to do this and it wiped everything ( including clockworkmod. ) Now I only get a S/W Upgrading screen with a red box. I tried using the pantech download tool and the PANTECH_PRESTO_BIN_JUUS03122012.pdl file. It did appear that it was installing it but then it became stuck at the very very very end of things. I basically had to take the battery out to do anything at all as I had left the phone on all night to download the pdl file but without any luck.
When I reboot the phone it had the S/W Upgrading mode with the red screen. I've tried all of the different key combinations on the pantech burst etc volume up + volume down and power, volume down + power, volume up + power. None of these things will reboot the phone.
I am hoping I can use the pantech download tool to install a different pdl instead and possibly get it working that way. I know that when the phone is off if I plug it into usb then the screen lights up on it with the S/W Upgrading screen and the red box. If I press the power button or any other combinations of buttons + the power button it also does this. It literally will not do anything else.
I cannot use pantech pc suite because the phone originally was so unusable I could not put the android apk file on the phone even though I have it on my laptop.
I tried using adb and fastboot and it will not even find my device through ANY usb port on the laptop. I've tried deleting and reinstalling the drivers over and over. The only thing I know to do is reboot afterward and hopefully it will find my phone on usb with adb. If I can just get to a bootloader or flash functional firmware onto this phone I think I could get it working but I do not know enough about the pantech burst to try physically jumping anything on it in order to hard reset it.
So my only options right now look like maybe get a different pdl, possibly reboot and the drivers may find my phone, or JTAG this thing.
I can't put it in usb debugging mode because it won't boot. Since adb does not even find the device as being attached it seems as if this phone should be operating in a different port mode or something to make it visible. I could be wrong but I am hoping that rebooting fixes the driver issue and makes the phone visible.
I tried PDAnet also and once again it does not work because it cannot find the device. This could be a usb cable issue I suppose but I only have this particular cable I am pretty sure
I might try another cable as well...
Any other ideas ? Am I going to have to JTAG this thing or should it be fixable using the download tool and a different pdl ? Or do I need to find another way to completely wipe the phone first and THEN use the download tool with the pdl file ?
It does get a bit confusing with so many mods, roms, and methods to recover android phones. If I can get the phone to boot then I can reload my backups and all should be well. I do need this phone for business purposes also. Any ideas guys ?
PS> I am also pretty decent with linux distros like arch or ubuntu so I would like to also know if it would just be better to do this in linux and possibly use linux to manually switch the phone to a different device mode to make it visible in the instance of there being nothing wrong with the drivers.
Thanks for any ideas or suggestions ...
Click to expand...
Click to collapse
--------------------------------------------------------------------------
OK quick update, I found the pantech burst upgrade tool and the burst-hack.cmd script
I managed to successfully find my phone with the upgrade tool and it completely ran its course and I am guessing it installed Ice Cream Sandwich.
My new problem is that the phone goes to the pantech logo boot screen if I plug the phone into usb but that is all it will do. If I unplug the phone and try to get into S/W Upgrade mode again or power it on it will not do anything at all. Basically the display only comes on when plugged in at this point so I am wondering if the battery is even charged or if it will charge. I read somewhere ( in the gizmolord forum ) that a guy had the same issue as me and he ran this tool for his pantech burst and then left the battery out for 2 weeks and tried to power it back on and it worked for him.
Is it possible that I just need to power the device down completely and let it completely discharge before it will reboot or is this thing bricked ?
I am thinking that either the battery needs to charge, or the phone needs to discharge and power down completely, or the phone could be bricked. I have a feeling it is not bricked because the update tool said everything was successful and no errors or anything.
I will try leaving the battery out for awhile and letting the phone discharge on its own and see what kind of results I get. I would think that 16 - 24 hours would be sufficient. Any ideas ?
---------------------------------------------------------------------------------------------------------------------
Ok so I did a bit more digging and research and found out that the culprit is most likely the poorly designed charging circuit in the pantech phones. I found a tech blog called Mikes Techblog where he shows how to solve this on a pantech jest phone with the same issue. The problem is that the battery is 3.7v and is currently reading 2.8v on the volt meter. The phone will not even attempt to charge until 3.7v is available on the battery because of how the charge circuit is designed. I am going to try the usb cable trick and usb adapter and see if I can monitor its progress with the voltmeter and get it back up to 3.7 volts. After this it should allow me to charge it normally and should boot just fine. It is showing the pantech logo which tells me that the firmware is there and isn't buzzing or doing anything else weird so more than likely this is related to the battery and not having enough of a charge when running the official upgrade tool. This problem probably had already existed prior running the update tool and is why the S/W Upgrading screen only would come up AFTER being plugged into a power source and would disappear immediately. If the battery had any charge whatsoever and if the phone could see it then I would see a screen that tells me to plug my phone in and charge it. I am thinking this is solved but will only know after I charge the battery. From what I've been reading in comments from others the battery issue is prevalent on many different pantech phones including the burst model. Other people with the pantech burst have said in comments on Mike's blog that this made their phone boot right up and said that this was EXACTLY the issue. Perhaps the best way to use these pantech phones is to never ever let them fully discharge the battery.
i have an lg g2 vs980 and i rooted it but have not yet installed a recovery like twrp it is only the very basic root with super user. it decided to install some ota update and now it will not boot past lg screen, white letters flash really fast all i could make out was secure boot error or something. i cannot get it into any kind of download or reset mode, iv tried absolutely everything anyone on this forum has recommended or suggested and nothing works, also when i connect it to my pc running windows 8 it is seen as QSUSB_BULK i have installed the correct updated drivers for my phone and iv manually installed them, nothing i have done will allow my pc to see my phone correctly. when i plug it in it under computer there are local drives f-u that pop up and say i have to format them in order to use them, but they are write protected so i cannot view whats in them, format them or anything. does anyone out there have any kind of suggestion to fix this or am i just completely stupid and missing some big major step? i am also very new to android this is my first android phone lol im a converted apple user haha so the more indept detailed instructions would be greatly appreciated
Same issue here
haeli said:
i have an lg g2 vs980 and i rooted it but have not yet installed a recovery like twrp it is only the very basic root with super user. it decided to install some ota update and now it will not boot past lg screen, white letters flash really fast all i could make out was secure boot error or something. i cannot get it into any kind of download or reset mode, iv tried absolutely everything anyone on this forum has recommended or suggested and nothing works, also when i connect it to my pc running windows 8 it is seen as QSUSB_BULK i have installed the correct updated drivers for my phone and iv manually installed them, nothing i have done will allow my pc to see my phone correctly. when i plug it in it under computer there are local drives f-u that pop up and say i have to format them in order to use them, but they are write protected so i cannot view whats in them, format them or anything. does anyone out there have any kind of suggestion to fix this or am i just completely stupid and missing some big major step? i am also very new to android this is my first android phone lol im a converted apple user haha so the more indept detailed instructions would be greatly appreciated
Click to expand...
Click to collapse
Has anyone come up with a solution to this? I am very new to Android, I have Rooted my G2 so I could install Custom Rom's. Yesterday I receive a OTA update, I refused it and then later when it came up again was going to refuse it, but my shaky finger touched the screen and started the update! next thing I know I have a $600.00 brick. if you hold the power button down It will flash the LG logo and then NADA, screen is lit but nothing happens. Hold the power button and after a few it will Flash the logo again but NADA again. If you hold the down and power button it will go to the reset screen, but again this will not reset the device. PLEASE HELP!
Thank you.
Need help...
Was messing the around with the screen density in the buildprop.. after reboot, "systemui keeps FCing" making it unusable and I cant do anything. Attempting to do a hard button combo to go into stock recovery but cant seems to get it to work.. Googleing tells me to, hold volume down and power till the LG logo, release power and rehold again.. it just reboots again.. holding all 3 brings me to a korean menu that I cant read.. holding up and power brings me to a recovery menu that I think only the service centre can use, there's no option in there, only asking me to reboot.
Any kind souls please....
scpion said:
Need help...
Was messing the around with the screen density in the buildprop.. after reboot, "systemui keeps FCing" making it unusable and I cant do anything. Attempting to do a hard button combo to go into stock recovery but cant seems to get it to work.. Googleing tells me to, hold volume down and power till the LG logo, release power and rehold again.. it just reboots again.. holding all 3 brings me to a korean menu that I cant read.. holding up and power brings me to a recovery menu that I think only the service centre can use, there's no option in there, only asking me to reboot.
Any kind souls please....
Click to expand...
Click to collapse
I've been trying to get into my stock recovery for some time now trying all sorts of button combos but to no avail. Previously I had the g2 and when it updated from jellybean to kitkat, the combo for entering stock recovery changed however, this new combo doesn't seem to work on the G Pro 2 either
You should be able to revive your device back to stock using the LG pc Suite however, after tampering with the system, it is often necessary to perform a factory reset after the pc suite has done it's work which will need you to enter stock recovery.
If you are completely stuck, I would suggest restoring your device using the pc suit and, all being well, your device will boot sufficiently for you to perform a reset through the phone settings menu. If you are really lucky, it may boot properly and you may not need to perform any reset however, it would still probably be a good idea to do so.
bobsie41 said:
I've been trying to get into my stock recovery for some time now trying all sorts of button combos but to no avail. Previously I had the g2 and when it updated from jellybean to kitkat, the combo for entering stock recovery changed however, this new combo doesn't seem to work on the G Pro 2 either
You should be able to revive your device back to stock using the LG pc Suite however, after tampering with the system, it is often necessary to perform a factory reset after the pc suite has done it's work which will need you to enter stock recovery.
If you are completely stuck, I would suggest restoring your device using the pc suit and, all being well, your device will boot sufficiently for you to perform a reset through the phone settings menu. If you are really lucky, it may boot properly and you may not need to perform any reset however, it would still probably be a good idea to do so.
Click to expand...
Click to collapse
I cant use the LG Suite... the screen doesnt allow me to choose the connection type.. It just FC constantly.. I am screwed..:crying::crying:
scpion said:
I cant use the LG Suite... the screen doesnt allow me to choose the connection type.. It just FC constantly.. I am screwed..:crying::crying:
Click to expand...
Click to collapse
Think the only option is to send it in officially and say I dun know what happened......
Help
Has anybody found the way to hard-reset D838 from a bootloop? I really cant reach the recovery mode
manas.neo said:
Has anybody found the way to hard-reset D838 from a bootloop? I really cant reach the recovery mode
Click to expand...
Click to collapse
I had tried everything.. Even adb command to reboot into recovery. It just brings me to a broken Android with red triangle. I am starting to think there is no stock recovery built in that is accessible to users..
I am now at the service centre. Well the guy can detect that its rooted.. voids warranty.... But will try to see if he can help to reflash the firmware.. If not have to change hardware and will be chargeable....... Fingers crossed. He did say users are not able to access the recovery..
Guys.. Until there's custom recovery, pls dun mess with it.....
That is really bad. I am stuck at bootloop and unable to reach the recovery mode. I wonder how entire web just talks about a hardreset process that doesnt even work
scpion said:
I had tried everything.. Even adb command to reboot into recovery. It just brings me to a broken Android with red triangle. I am starting to think there is no stock recovery built in that is accessible to users..
Click to expand...
Click to collapse
manas.neo said:
That is really bad. I am stuck at bootloop and unable to reach the recovery mode. I wonder how entire web just talks about a hardreset process that doesnt even work
Click to expand...
Click to collapse
I know.. I was desperate too... There's 2 versions, the other model is f350 or something.. Anyway at the service he did flash the phone again for me foc. BUT! He stamp a big NO WARRANTY as well... Goodbye to my balance 10 months warranty.. Buy hey.. I am grateful that I have my phone working again..I think.
I confirm with him again.. Yes, there is no stock recovery users can access....
scpion said:
I know.. I was desperate too... There's 2 versions, the other model is f350 or something.. Anyway at the service he did flash the phone again for me foc. BUT! He stamp a big NO WARRANTY as well... Goodbye to my balance 10 months warranty.. Buy hey.. I am grateful that I have my phone working again..I think.
I confirm with him again.. Yes, there is no stock recovery users can access....
Click to expand...
Click to collapse
Glad you were able to get your phone back. I have some positive news. I am trying out a recovery method as we speak. Using the LG Software update & USB driver tool I found the option for a update recovery. So I gave the IMEI and it prompted for a connection to the device which wasnt there as the phone is stuck in a boot loop. So I thought if it is going to restore the firmware from PC ( and not OTA) then it at some point of time will take the phone to download mode. So I just put the phone in download mode and VOILA it recognised the connection. And right now it is downloading the recovery firmware. The firmware being downloaded is around 1.5GB which is exactly what size I expected it to be. I have my fingers crossed. Just hope it goes through fine.
manas.neo said:
Glad you were able to get your phone back. I have some positive news. I am trying out a recovery method as we speak. Using the LG Software update & USB driver tool I found the option for a update recovery. So I gave the IMEI and it prompted for a connection to the device which wasnt there as the phone is stuck in a boot loop. So I thought if it is going to restore the firmware from PC ( and not OTA) then it at some point of time will take the phone to download mode. So I just put the phone in download mode and VOILA it recognised the connection. And right now it is downloading the recovery firmware. The firmware being downloaded is around 1.5GB which is exactly what size I expected it to be. I have my fingers crossed. Just hope it goes through fine.
Click to expand...
Click to collapse
As I mentioned in an earliar post on this thread, you can usually get the device into a booting state using the lg pc suite. You will probably have to perform a factory reset but, hopefully, after using the tool, you can access the software factory reset in the settings menu. From past experience with other lg devices, it can often help if you run the recovery more than once in the pc suite.
bobsie41 said:
As I mentioned in an earliar post on this thread, you can usually get the device into a booting state using the lg pc suite. You will probably have to perform a factory reset but, hopefully, after using the tool, you can access the software factory reset in the settings menu. From past experience with other lg devices, it can often help if you run the recovery more than once in the pc suite.
Click to expand...
Click to collapse
Hi Bob,
Yes I think the same option is there in the LG PC Suite as well. But unless you do what I have tried to do it wont recognise a device that has not booted yet. Devices soft-bricked or bootlooping wont be recognised by the PC suite for recovery. But thanks for the tip. I'd keep that in mind and see if it'd need another factory reset after recovery. But it seems like it will be a hard reset done by the recovery happening right now
manas.neo said:
Hi Bob,
Yes I think the same option is there in the LG PC Suite as well. But unless you do what I have tried to do it wont recognise a device that has not booted yet. Devices soft-bricked or bootlooping wont be recognised by the PC suite for recovery. But thanks for the tip. I'd keep that in mind and see if it'd need another factory reset after recovery. But it seems like it will be a hard reset done by the recovery happening right now
Click to expand...
Click to collapse
Good luck. If no joy just try the pc suit. I'm fairly sure I had a success on my old g2 with a similar problem to yours. Can't remember exactly what I did but I kept trying things and eventually the pc suit recognised and sorted my device. Perhaps try to adb reboot recovery with the pc suit on screen??
PC suite and the software update thing didn't work for me. It just refuse to recognize my device. Hope things work out for u!
bobsie41 said:
Good luck. If no joy just try the pc suit. I'm fairly sure I had a success on my old g2 with a similar problem to yours. Can't remember exactly what I did but I kept trying things and eventually the pc suit recognised and sorted my device. Perhaps try to adb reboot recovery with the pc suit on screen??
Click to expand...
Click to collapse
Thanks. I was able to revive my phone. No loss of apps and data. Just the root was lost. Can you tell me what issues you have witnessed after such a recovery that made you to do a factory reset? The phone looks fine at the moment but wonder if it'd end up in a boot loop again.
manas.neo said:
Thanks. I was able to revive my phone. No loss of apps and data. Just the root was lost. Can you tell me what issues you have witnessed after such a recovery that made you to do a factory reset? The phone looks fine at the moment but wonder if it'd end up in a boot loop again.
Click to expand...
Click to collapse
You shouldn't have a problem. I just like to have a clean start and to make sure that there are no alien files left from my previous tampering.
bobsie41 said:
You shouldn't have a problem. I just like to have a clean start and to make sure that there are no alien files left from my previous tampering.
Click to expand...
Click to collapse
It went all smooth. I'd like to shout out to all LG G Pro 2 users to make a note of this method and try it whenever they soft-brick their phones.
service
scpion said:
I know.. I was desperate too... There's 2 versions, the other model is f350 or something.. Anyway at the service he did flash the phone again for me foc. BUT! He stamp a big NO WARRANTY as well... Goodbye to my balance 10 months warranty.. Buy hey.. I am grateful that I have my phone working again..I think.
I confirm with him again.. Yes, there is no stock recovery users can access....
Click to expand...
Click to collapse
Hi there,
I am in the same situation, I can not do the factory reset in any way was mentioned here (pc suite, lg update) in the forum, because there is no connection between the pc and the mobile.
Where you from anyway and which mobile service did you take your phone, how much was the service cost?
THX
david_csaba said:
Hi there,
I am in the same situation, I can not do the factory reset in any way was mentioned here (pc suite, lg update) in the forum, because there is no connection between the pc and the mobile.
Where you from anyway and which mobile service did you take your phone, how much was the service cost?
THX
Click to expand...
Click to collapse
Did you try this:
VOL DOWN + POWER
when LG logo appears release booth keys and wait 2 sec then
VOL DOWN + VOL UP
you should get factory reset screen
Maybe this has been solved before but so far I haven't found a solution to my OPO Hardbrick and I really need of your help. I tried flashing resurrection remix to my OPO and I guess it went wrong, I tried restoring my backup and it didn't work so I decided to factory reset it which deleted the rom. Now, I have used several tool kits and they all seem to have not worked, it only removed my custom recovery (TWRP) and replaced it with the Cyanogen Recovery, now my phone doesn't even turn on, its all black and vibrates, I am able to use the tool kits using the volume up and power button, but no fastboot, any solutions? Thank you so much
Ok, first step is not to panic and don't do crazy stuff and go over logically. There is no help in starting to flash stuff when your pc doesn't properly connect to your phone.
Does your pc recognize the phone when you insert the USB port after you placed it in the vol+ and power on mode (fastboot)? If yes the device should be seen in the device manager as a android or usb thing.
Check with skipsoft toolkit if you see the device with adb. Do you see any number?
Don't panic here is the solution
https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Juan_Cuen said:
Maybe this has been solved before but so far I haven't found a solution to my OPO Hardbrick and I really need of your help. I tried flashing resurrection remix to my OPO and I guess it went wrong, I tried restoring my backup and it didn't work so I decided to factory reset it which deleted the rom. Now, I have used several tool kits and they all seem to have not worked, it only removed my custom recovery (TWRP) and replaced it with the Cyanogen Recovery, now my phone doesn't even turn on, its all black and vibrates, I am able to use the tool kits using the volume up and power button, but no fastboot, any solutions? Thank you so much
Click to expand...
Click to collapse
Like the other people are saying, don't worry, it's probaly not that big of a deal. I had this before. Try booting into fastboot mode and reflash TWRP recovery using the method showcased in this video: https://www.youtube.com/watch?v=KZaajUEybNM (you need to skip through it a little). Make sure you have all the proper drivers installed on your computer.
The phone doesn't go into fastboot, but it is recognized by my computer as QU something with a q, with the qualcomm drivers, I have managed to only let it be recognized via tool kits, It doesn't go into fastboot or anything. I have tried the ColorOS toolkit but apparently its more succesful if I try it on an XP computer. Whenever I hold the power and Volume Up the Phone vibrates and is recognized by the tool kit
Hello everyone
Please help me
I have a Moto g Sylus 5g
I was following this tutorial https://www.getdroidtips.com/lineage-os-19-moto-g-stylus-5g/
to download a custom room for my Motorola device and then after I finished the installation of the room when I was on TWRP screen I've pressed recovery and then my phone went black screen nothing works..
But it didn't work. Now my phone is bricked. It's powered off and I can't turn it on again
It doesn't respond to anything
Pressing Powerbutton - Nothing
Pressing Power + Volume Up/Down - Nothing
Hold Volume down and connect to PC - Nothing
Connect to the Adapter for charging - only showing the Led light
ADB doesn't recognize the phone
Flashtool responds "Device disconnected"
So I can't flash back stock ROM
Please help me out. What went wrong? How can I fix it? Is it repairable or is my phone hard bricked?
Thank you for your answers
Hello friend, honestly I am new to this. In fact I'm looking for how to unlock my moto g stylus 5g xt2131-1 from metropcs to use it with a mobile operator in Colombia. But given your problem, and everything I've researched recently, I would say you could check this video:
in which revive a moto g8+, although it is a different version, it should work if you do the steps as indicated.
Join Electimons telegram https://t.me/electimonrel someone might be able to help.
Don't follow random guides and guides for other phones.
Yep my phone did the same thing. There is some glitch with TWRP for this phone that hard bricks the device. There are several posts here with the same issue. I tried what this video suggestion with every combination of contacts on the board. I bought an EDL cable as well and nothing would bring it back to life. I cannot recommend TWRP for this phone at this time.
duffman452001 said:
Yep my phone did the same thing. There is some glitch with TWRP for this phone that hard bricks the device. There are several posts here with the same issue. I tried what this video suggestion with every combination of contacts on the board. I bought an EDL cable as well and nothing would bring it back to life. I cannot recommend TWRP for this phone at this time.
Click to expand...
Click to collapse
Yes, Same. Nothing worked with it. I bought a new phone. I hope we find something in the future to fix it.