Maybe this has been solved before but so far I haven't found a solution to my OPO Hardbrick and I really need of your help. I tried flashing resurrection remix to my OPO and I guess it went wrong, I tried restoring my backup and it didn't work so I decided to factory reset it which deleted the rom. Now, I have used several tool kits and they all seem to have not worked, it only removed my custom recovery (TWRP) and replaced it with the Cyanogen Recovery, now my phone doesn't even turn on, its all black and vibrates, I am able to use the tool kits using the volume up and power button, but no fastboot, any solutions? Thank you so much
Ok, first step is not to panic and don't do crazy stuff and go over logically. There is no help in starting to flash stuff when your pc doesn't properly connect to your phone.
Does your pc recognize the phone when you insert the USB port after you placed it in the vol+ and power on mode (fastboot)? If yes the device should be seen in the device manager as a android or usb thing.
Check with skipsoft toolkit if you see the device with adb. Do you see any number?
Don't panic here is the solution
https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Juan_Cuen said:
Maybe this has been solved before but so far I haven't found a solution to my OPO Hardbrick and I really need of your help. I tried flashing resurrection remix to my OPO and I guess it went wrong, I tried restoring my backup and it didn't work so I decided to factory reset it which deleted the rom. Now, I have used several tool kits and they all seem to have not worked, it only removed my custom recovery (TWRP) and replaced it with the Cyanogen Recovery, now my phone doesn't even turn on, its all black and vibrates, I am able to use the tool kits using the volume up and power button, but no fastboot, any solutions? Thank you so much
Click to expand...
Click to collapse
Like the other people are saying, don't worry, it's probaly not that big of a deal. I had this before. Try booting into fastboot mode and reflash TWRP recovery using the method showcased in this video: https://www.youtube.com/watch?v=KZaajUEybNM (you need to skip through it a little). Make sure you have all the proper drivers installed on your computer.
The phone doesn't go into fastboot, but it is recognized by my computer as QU something with a q, with the qualcomm drivers, I have managed to only let it be recognized via tool kits, It doesn't go into fastboot or anything. I have tried the ColorOS toolkit but apparently its more succesful if I try it on an XP computer. Whenever I hold the power and Volume Up the Phone vibrates and is recognized by the tool kit
Related
Hi,
Sorry for any incorrect information in advance, as I am pretty new to this.
I own a Nexus 7 2013 (32gb), I don't know what I am currently running, as my device won't start but, I was running CM11 4.4.4.
Today I decided that I'd try out Android 5.0.1, so I tried to flash my device, this did not work as my device was not found. I used the SDK tools from Google, with the razor image (5.0.1 (LRX22C)). I do have the USB driver add-on from the SDK tools, but that did not fix the problem. As this did not work, I tried this alternative method --> http://forum.xda-developers.com/showthread.php?t=2381582
Whilst carrying out this method I pressed enter through all the steps, even though my tablet did not restart like it was meant to. I then manually put the tablet into fastboot mode and tried again, pressing enter through the whole process. Again my tablet stayed on the same screen (fastboot). I put tried to power on the tablet, which didn't work and put me onto the Google start screen, where nothing happens. The console said that all my data has been deleted, even the os, but then the new image has not been transferred to the tablet.
I then tried the WugFresh N7 toolkit, which again did not succeed in transferring the flash image.
I don't think that I have an os on my device any more, and I cannot put on onto it. I don't know if my USB port is faulty on my device because when I plug it into my laptop, the disconnection sound sounds every so often, maybe that is why I cannot transfer data to it.
If I try to boot my device, it freezes on the Google screen, then nothing happens. If I enter fastboot mode, then go into recovery mode, the picture of the fastboot droid comes up with an x through it.
Any ideas?
Any help appreciated, thanks
P.S sorry for low quality photos, also my tablet is no longer detected in the WugFresh toolkit
willdev13 said:
Hi,
Sorry for any incorrect information in advance, as I am pretty new to this.
I own a Nexus 7 2013 (32gb), I don't know what I am currently running, as my device won't start but, I was running CM11 4.4.4.
Today I decided that I'd try out Android 5.0.1, so I tried to flash my device, this did not work as my device was not found. I used the SDK tools from Google, with the razor image (5.0.1 (LRX22C)). I do have the USB driver add-on from the SDK tools, but that did not fix the problem. As this did not work, I tried this alternative method --> http://forum.xda-developers.com/showthread.php?t=2381582
Whilst carrying out this method I pressed enter through all the steps, even though my tablet did not restart like it was meant to. I then manually put the tablet into fastboot mode and tried again, pressing enter through the whole process. Again my tablet stayed on the same screen (fastboot). I put tried to power on the tablet, which didn't work and put me onto the Google start screen, where nothing happens. The console said that all my data has been deleted, even the os, but then the new image has not been transferred to the tablet.
I then tried the WugFresh N7 toolkit, which again did not succeed in transferring the flash image.
I don't think that I have an os on my device any more, and I cannot put on onto it. I don't know if my USB port is faulty on my device because when I plug it into my laptop, the disconnection sound sounds every so often, maybe that is why I cannot transfer data to it.
If I try to boot my device, it freezes on the Google screen, then nothing happens. If I enter fastboot mode, then go into recovery mode, the picture of the fastboot droid comes up with an x through it.
Any ideas?
Any help appreciated, thanks
P.S sorry for low quality photos, also my tablet is no longer detected in the WugFresh toolkit
Click to expand...
Click to collapse
I can suggest u you flash stock firmware using fastboot.
As after reading your query I am sure that the OS has been deleted or corrupted due to several methods used by u.
Go to ur respective forum and u will find everyrhing related to it.
Press thanks if helped
nightwalker said:
I can suggest u you flash stock firmware using fastboot.
As after reading your query I am sure that the OS has been deleted or corrupted due to several methods used by u.
Go to ur respective forum and u will find everyrhing related to it.
Press thanks if helped
Click to expand...
Click to collapse
I can't flash it with anything, but thanks anyway
willdev13 said:
I can't flash it with anything, but thanks anyway
Click to expand...
Click to collapse
If this is the situation then submit it to S.C
So I have/had a rooted Xperia z3v D6708 and tried flashing http://forum.xda-developers.com/z3/development/d6603-23-1-1-28-t3102271/ using TWRP recovery and everything seemed to go fine. I rebooted my phone after the flash but nothing happened. I tried booting into recovery again to try and restore my phone but nothing happened. I tried plugging it into my computer and it just vibrates every 2 seconds while flashing red then immediately green. This leads me to believe its not bricked so I downloaded the stock firmware using flashtool and tried flashing it onto the phone but when it gets to the part when it asks me to put my phone into flash mode by holding the vol down and plugging it in I do that but nothing happened. I also tried fast boot mode and that seems to work because the phone stops vibrating and the light turns solid blue but there is still a black screen and my computer stays at the screen instructing me to put the phone in fast boot mode so it never recognizes the phone. What should I do?
P.S. flashtool never recognizes the phone when I connect it but it does say this
17/009/2015 14:09:29 - ERROR - Drivers need to be installed for connected device.
17/009/2015 14:09:29 - ERROR - You can find them in the drivers folder of Flashtool.
I tried installing the drivers for my device along with the ones for flashing and fast boot but it didn't work...
Someone please help me!
Tried a full restore with the Sony PC companion? Usually at least gets you out of a soft brick if nothing else is working. Good news is that it's pretty hard to hard brick a sony phone when you're just flashing roms, so your phone is probably fine. I had trouble with the flashtool drivers actually installing because of Win8/10 driver stuff, so that might also be your problem if you're on those OS's. You might want to look into disabling 'Disable Driver Signature Enforcement' and trying again to make sure.
Google the disable driver thing he mentioned ^ I had the same issue and for future reference you can't flash any roms, you can only flash roms in the z3v sections, sound mods and other things like that should be fine to flash
Hi Guys,
I am quite new to custom ROM's and the idea of rooting, however I was using SP Flash tools to wipe the flash storage of my device after a rather serious boot loop. Now I can see that this was not the best of ideas. Firstly I tried flashing TWRP again, but this did not fix the issue so I decided to format the whole flash. During this process SP Flash tools unexpectedly crashed. This resulted in the interrupt of the process and has left my phone practically dead. I can not get anything from the screen like recovery mode. Even after very long button presses of the power switch. To try and rectify this, I downloaded the Umi Super custom ROM and loaded it into SP Flash tools. However when I press download, there is no response and it does not even begin to download let alone flash. I have left it on for about 15 minutes with no response. I have also tried unplugging it and holding the volume buttons down in different combinations. Although this may seem as though the device has boot loader issues and can no longer communicate, I don't believe this is the case. Because when I plug the device in and out of my computer it recognizes it and loads the correct drivers for the device. Therefore there must be some sort of communication between my device and the computer.
I have used SP flash tools in the past with this phone and it has never had issues. I have also tried reinstalling the drivers and moving to a different PC. Even changing USB cable, but no luck. I am using the latest versions of all the software.
I really hope someone may have an idea and I would really appreciate it.
Thank you again,
James
Hi !
A good thread for your issue can be found here https://forum.xda-developers.com/android/development/umi-super-guide-firmwares-roms-kernel-t3396662
Good luck !
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
try charging the phone for a few hours
se7enlyn said:
try charging the phone for a few hours
Click to expand...
Click to collapse
yeah, forgot to mention that. can't even charge it. when I plug it in it does the same. tries to turn on. shows the first splash screen and reboots doing the same again and again. doesnt even show the charging screen with chinese text and battery animation.
sounds like u need a new battery
ireaper4592 said:
sounds like u need a new battery
Click to expand...
Click to collapse
already tried that too. had a replacement battery laying around. changed it and still no luck.
@bmark240
help please
se7enlyn said:
@bmark240
help please
Click to expand...
Click to collapse
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
bmark240 said:
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
Click to expand...
Click to collapse
Yes, I have TWRP installed, but cant access it. Shows the TWRP splash screen and then reboots after like 10 seconds or so.
ADB does not see device. Only shows the device during that 10 second TWRP splash screen time, but even then no commands are effective and it just reboots.
Already tried holding down power button for few seconds. No luck.
I already installed all the possible drivers and media feature packs on my Windows 10. Still no luck.
And yes, I am running latest Windows 10 Pro x64.
And no, since I cant access Fastboot, I can not re-flash TWRP either.
kallum7 said:
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Gonna try that right now. Hopefully that will fix it.
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
THEVAN3D said:
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
Click to expand...
Click to collapse
because i had bricked my phone a few months ago and that is how i got my phone back using the colour os
THEVAN3D said:
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
Click to expand...
Click to collapse
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
FairuzOnn said:
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
Click to expand...
Click to collapse
Thanks, but I already fixed it.
i had it in the past for some reason too. Managed to fix it using the color os method. Carefully followed the steps until i could flash again. That was a year ago tohugh. There should be some thread around wit some all-in-one solution against bricks.
So here is what happened, I installed TWRP on my device and completely wiped my phone so I can install bootleggers OS and Gapps on my Pixel 2 Walleye. But I accidentally booted into Boot slot B on twrp and now the only thing the device can boot into is the bootloader mode, recovery and download mode is completely useless, It gives me either operation denied error or Error slot unbootable. The worst part is no computer will recognize my pixel in device manager at all. Mac computer will not detect it either. Ant tips on how to fix this? And again my I have all drivers installed and platform tools are up to date. And devices bootloader is unlocked.
Anything helps!
RomBetaTester said:
So here is what happened, I installed TWRP on my device and completely wiped my phone so I can install bootleggers OS and Gapps on my Pixel 2 Walleye. But I accidentally booted into Boot slot B on twrp and now the only thing the device can boot into is the bootloader mode, recovery and download mode is completely useless, It gives me either operation denied error or Error slot unbootable. The worst part is no computer will recognize my pixel in device manager at all. Mac computer will not detect it either. Ant tips on how to fix this? And again my I have all drivers installed and platform tools are up to date. And devices bootloader is unlocked.
Anything helps!
Click to expand...
Click to collapse
Did you use the same USB cable each time? If yes try different ones, even if it seems to work with other devices. On your PC go to device manager, then view and then hidden devices. Remove anything that has to do with Android. Then try connecting your device. Does an andriod driver show up after you've connected your device?
I have tried 3 different cables. But will try another one
RomBetaTester said:
I have tried 3 different cables. But will try another one
Click to expand...
Click to collapse
Did you go to view, hidden files in device manager and delete all Android drivers? And if you did, did anything show up after connecting your device?
I am having a similar issue after trying to flash the March update. During the script, the System image failed to transfer completely. I tried again using deuce flash all script, and it got a little further (4/5) with the System image but ultimately failed. Things got worse when my computer stopped recognizing the phone. Now I can't even try anything else because there is no communication, similar to OP. I have tried three different computers, three different cables, and have tried deleting Android related drivers in the device manager. No luck, unfortunately. I tried installing USB drivers from Google which also did not help. I welcome any other ideas of what to try next and appreciate any help.
EDIT: I solved the problem by draining the battery completely. In order to drain the battery, I first left the barcode screen on until eventually just the battery image is displayed on-screen when pressing power. Then eventually there will not be enough power to light up the screen at all, but the LED indicator will blink red while holding the power button. Now, I set up my phone such that the power button was held pressed down and left it there until the LED stopped blinking. Now that the power is completely drained, I could successfully get my computer to recognize it! I followed the steps in this post:
https://forum.xda-developers.com/showpost.php?p=78726736&postcount=13
EDIT2: I should also note that the system image didn't flash successfully the first time and I had repeat step 12 which is flashing the update. Luckily it worked the second time!
I had something similar happen. Held down power for about 10 seconds or so until the phone vibrated, then it was recognised by the computer. Then flash stock image
https://forum.xda-developers.com/showpost.php?p=78744315&postcount=31
ricky56789 said:
I had something similar happen. Held down power for about 10 seconds or so until the phone vibrated, then it was recognised by the computer. Then flash stock image
https://forum.xda-developers.com/showpost.php?p=78744315&postcount=31
Click to expand...
Click to collapse
Man you just saved me =)