when i press the nvidia button it lights up but won't boot tried everything. when I plug it to the pc it starts installing some APX device and then fails i can't find the drivers for that anywhere. please help.
Related
I need a little help my device is stuck in apx mode (blank screen with power led on) i have uid (cpuid) and sbk i have read a lot fom this forum and have all the tool to root, flash, load.. But my main problem is that when i reset my acer a500 and the usb is attached the windows 7 recognizes the driver and (sound pops up) and the driver (acer picasso usb boot recovery driver) is there but no tool e.g apxtool or fastflash or ics rooting nothing works or regocznies the device coz when i press any option or press the key to continue the drive drops and vanishes from the window usb list in device manager and i have to manually reset acer again to get the driver back but still no use as command prompt tells me that no device is attached or found. Please help as this acer is my wifes gift to me and im trying hard to get it back its totally dead
I have followed every tutorial I can find but am still unable to enter flash mode.
I have flashtool installed and have downloaded the drivers.. When I press volume down and plug on micro USB the phone flashes a red and green LED and then boots up normally.
Any help appreciated.
Still stuck with this problem...is it possible to uninstall the drivers and maybe reinstall them? If so, where would I find the drivers to uninstall?
Have one Nexus 5 with "no command " showing on screen so i tried to flash it with Nexus root toolkit, phone froze and after that its dead and when i try to plug it on comp i just get USB composite device with yellow triangle in device manager. Phone is currently dead , not able to enter download mode, no bootloader mode, not showing anything on charger and not turning on.
Any ideas or suggestions please.
Try to update drivers from device manager if its showing a triangle when u connect ur phone! and install [pda net drivers ..
try this method it worked for me! while connecting to charger not on pc or lappy wall charger press Vol+ and Vol- and power button at the same time and connect it to the charger!!
pranavmali said:
Try to update drivers from device manager if its showing a triangle when u connect ur phone! and install [pda net drivers ..
try this method it worked for me! while connecting to charger not on pc or lappy wall charger press Vol+ and Vol- and power button at the same time and connect it to the charger!!
Click to expand...
Click to collapse
Thanks for the reply but the phone does not turn on no matter how i try to connect it and pda net driver need the phone to has enabled USB debugging which i can not do on a dead phone
Try removing battery from the back just the connector and plug it to ur PC don't attach the battery!
Now situation is this
when turns on:- a vibrating sound, logo appears, gets stuck and doesn't move further.
when plugs it with pc:- The PC doesn't recognise it, no sound while plugging.
PC:- Windows 8.1
Additional Problem:- volume keys are broken. hence unable to enter in emergency mode or Recovery mode.
XDA Visitor said:
Now situation is this
when turns on:- a vibrating sound, logo appears, gets stuck and doesn't move further.
when plugs it with pc:- The PC doesn't recognise it, no sound while plugging.
PC:- Windows 8.1
Additional Problem:- volume keys are broken. hence unable to enter in emergency mode or Recovery mode.
Click to expand...
Click to collapse
Greetings and welcome to assist. If you can not get into download mode or recovery mode there is very little we can do. Do you have adb/fastboot installed ? If you can access the phone through adb you may be able to do something
Good Luck
Sawdoctor
I hope someone sees this- I know it's an old phone. It was working fine until a few days ago. Seems to be soft bricked. Need to recover data (photos etc) from internal user memory. Please help?
Stuck on Samsung S7275R boot logo. Charging doesn't go past initial spinning wheel. Recovery mode doesn't load (black screen with vol+, home, power). Download mode does enter, Samsung USB driver installs, com port and device detected in ODIN. Tried to flash TWRP and firmware, but ODIN fails to flash anything (stuck on initializing, then eventually fails with device info error). In download mode, device is not recognised in KIES or ADB. Cables and PC are OK- Samsung s3 connects fine.
Is there any way to recover my data without JTAG? Please help!