Hello please help
im on cm rom and it was working all good and smooth suddenly this morning screen turned off and tablet not rebooting since then ..i tried to put on charger and connect thru usb and install drivers gives me MTP USB DEVICE FAILED . i even tried the power button +volume down there's nothing
Device is suddenly dead..any ideas?
edit:
its GT-P5100
press powerbutton 30 seconds or longer, why are you crossposting your problem?
Hi guys
i think i bricked my su870
as of now, if i connect it to a charger or press the power on button, it will only bootloop
LG logo appears then it restarted back
i tried to revive it by using the wkpark boot, but apparently my windows 8.1 cant even detect my phone as omap (i've removed the battery.also tried to plug the usb cable directly and even tried connect it while holding Vol + )
it just said Unknown USB Device (Device Failed Enumeration) in device manager and windows keep on connect/disconnecting it.tried to right click on it and update the driver.pointed it to the OMAP folder,but it just straight away said latest driver has been installed
try another cable and windows doesnt even detect the phone at all
any idea how do i revive this phone ?
thanks
hello i have sonyxperia m2
my kid's lock the pattern
usb debuggin is off
no root
i forgot the pass for my mail acount
when connet via usb cable to pc dont found my device
so what can i do????
i tried pc companion or fl;ash tool from sony but nothing
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
thnks for reply
Dzepar said:
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4[/QUOT]
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
sta8man said:
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
Shouldn't one just need to install PC Companion?
http://support.sonymobile.com/gb/tools/pc-companion/
All USB drivers should be included. Since it seems you have it installed already try to uninstall it (and the USB drivers if they still are there), reboot and install PC Companion again.
Otherwise if you have access to a Mac make it simple and do it from there. No bleeding drivers needed.
As Miche1asso said, PC companion should do the work.
Also install falshmod and fastboot drivers from Flashtool/drivers folder, if you're on Windows 8.1 you need to disable driver signature verification (Google that).
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Don't worry OP. As you said, your phone's pattern is locked so even if you connect it to the pc it won't be recognised.
1. Install pc companion.
2. Search for the repair option. (Google it)
3. Then select your phone model. Go ahead.
4. Official firmware will be downloaded now.
5. Pc companion will then ask you to connect phone in flashmode by switching off phone and then holding volume down button and connecting to usb cable.
6. Leave it for 20 minutes.
7. Previous data will be gone. Enjoy fresh stock rom.
Don't worry about the drivers. When you connect phone in flashmode, your computer will install s1 boot drivers which will do the work.
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
Flashtools doesn't have drivers for Xperia M2.
Trick to install Xperia M2 drivers.
1. Remove Xperia M2 from devices and printers section. Reboot.
2. Install PC companion.
3. Click how to connect and select usb cable.
4. When PC companion asks to connect phone just connect and leave it.
5. It takes a little time but you can see a window saying installing drivers for Xperia M2.
6. After finishing all of this, you can check in flashtools whether drivers are fully installed or not.
If this helps, use it. ?
thnlks for your time brother and sister no solved
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
sta8man said:
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
Click to expand...
Click to collapse
Try with this flashtool:
http://www.flashtool.net/index.php
Try connecting it in flashmode to install drivers (connect phone turned off to PC holding volume down button).
just the same problema
ihave do it but nothing .
download the adb driver installer to find my device but nothing no device founded
i try many times connect phone turned off to PC holding volume down button but cant in to flash mode . thnx for your time
i want suitable *.inf for manual driver install for wxp sp3 32bit
Do you have access to another computer? I'd try to see if it works on that. At least you would rule out the option that the phone USB is burned or something. And in case you didn't do it already, I'd try with a third USB cable.
You're making a mistake my friend.
Why am i sure? Because i did the same thing. Drivers will only be installed by pcc as far as i know. Flashtool doesn't have drivers for M2.
Follow my tutorial exactly the way I've given it.
Start fresh. A new pc running windows 7 will do the work.
thnks my friend but...
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
sta8man said:
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
Click to expand...
Click to collapse
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
Click to expand...
Click to collapse
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
device cant on in flash mode
Miche1asso said:
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
Click to expand...
Click to collapse
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
sta8man said:
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
Click to expand...
Click to collapse
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Miche1asso said:
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Click to expand...
Click to collapse
i have allready do this bro just flashes on time green led thats all .... i dont know mayde have hardware problem ---->usb connector
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
nlooooo said:
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
Click to expand...
Click to collapse
flashtool report nothing if connect mobile or not is the same think repot nothing
I went to a technical MOBILE and he cant root my mobile he said that ...
you might have problem usb Connector but im not 100% sure
my laptop doesnot detect any port when i connect my device and i pressed volume up nothing happen please help
lawren91 said:
my laptop doesnot detect any port when i connect my device and i pressed volume up nothing happen please help
Click to expand...
Click to collapse
Hello.
Give us a more details about your phone, like what you have done before, how is it bricked.
Have you tried services?
lawren91 said:
my laptop doesnot detect any port when i connect my device and i pressed volume up nothing happen please help
Click to expand...
Click to collapse
Keep press the vol- or hold the vol- to detect the phone driver to laptop
try this
if u encountered a problem where the led are lightning when u charge without battery and;
there are no light when u charging with battery,
try this;;
when u start the flash tools..
plug in ur cable while holding power sound + and -...
then put the battery and wait ur laptop detect ur phone and flashtools will start flashing your phone..
hope this helps..
Only Red Led Blinks When Connected To USB Or Charging , WHSHUA Tool Also Doesnt Detect The Phone . Please Help I Shown My Phone To Mobile Repair Shop They Told Me You Have Boot Breaked The Phone . Help Me To Solve This ?
please help us
i have the same problem guys and i've tried every possible way in this forum
please let us know what youve done on your phone before this things happen.
you have to force your pc to install your phones driver so wmshua can detect your phone.
try to connect your phone to computer via usb cable without backcover then hold the power and volume down, while holding press reset button of your xperia c, don't release the power and volume just wait to your computer response, if you see installing driver then that's your lucky day if not try it again.
and one last thing you can try to turnoff your phone by holding power/volume+/voume- for couple of seconds, when you successfully turn your phone off try to connect the use cable to the computer first then while connecting to your phone hold power and volume- and wait if your pc install the driver.
hope this may help you guys.