Hi,
My SD card suddenly went unmountable. My phone restarted automatically and hasn't been able to mount the card. It is not recognizable in Windows too. I just see a grayed out drive that has 0MB.
I'm using Apps2SD on my phone and I had to partition my SD card with one Ext4 partition and on FAT32.
The thing is that because the first partition is Ext4, Windows cannot see the second FAT32 partition.
How can I check if my SD card really went dead or is it a matter of corrupted file system?
What program can I use to scan and check Linux partitions on SD card?
Related
I have an HTC Hero rooted with stock 2.1 firmware
I installed Link2SD and read through the development post on this forum but encountered and issue I cannot figure out how to resolve.
I reformatted my SD card with 2 primary partitions using MiniTool. I re-sized my standard partition to allow for an additional 400MB partition then formatted the unallocated memory to ext3 format.
So now I have 2 partitions that look like this in MiniTool (4GB SD card):
Partition FileSystem Size Status Type
-SDCard FAT32 3.30GB Active Primary
-AppsPartition ext3 400.06MB None Primary
(sorry cant get more spaces between words, dont use forums often)
I thought that was all I needed to do but when I put the SD Card into my Hero it just tells me I have a damaged SD Card. What do I do to fix this?
I just wanted to say I figured this out on my own. I don't know what the problem was but I reformatted the SD card from the Hero and it only formatted the SDCard partition and then I had to reformat the AppsPartition to FAT32 file system in order to be usable by link2sd and it worked.
No idea what caused the problem to begin with but got it resolved, that's all that matters right?
I had problems too until I formatted partition 1 as FAT (aka FAT16 - NOT FAT32), and the second as FAT32 or Ext2/3.
The key for me was the first partition being FAT.
I'm just wondering if anyone else has been able to make a second partition on their O3D/Thrill. I'm not sure if this problem I'm having is a limitation to the phone, or rom.
I'm using an LG Thrill with v20c baseband, Prometheus V1.4 rom.
I'm following this guide here:
http://forum.xda-developers.com/wiki/SD_card_partitioning
I have a 32gb micro sd. I've made my 2nd partition 10gb as ext2. When I put it in the phone it reads it, says it's ready to read/write media (in notifications bar). I then go to link2sd, it automatically asks me if the 2nd partition is ext2, ext3, ext4, or fat32/fat16. I tried ext2 and it says:
"Mount script cannot be created. mount: mounting /dev/block/vold/179:18 on /data/sdext2 failed: Invalid argument.
I then put it back into my computer and formated to fat32, same thing, then ext4, same thing. Each time I put it back into my computer Gparted sees the 2nd partition as "unknown", so I believe android is changing the partition type to something unrecognizable.
Well, being I haven't got a reply yet, I'll ask this,
Has anyone with an Optimus 3D partitioned their SD card?
Oh i did & got it worked but I stopped using the link2sd partitioning my sdcard, because somethings you should know. Well first, the sd has to be fat32 & when asking about the 2nd partition, chose fat32 and then reboot the phone. I tried ext2 or ext whatever just never work. After reboot and link2sd ask the same thing again, just pick the fat32 partion and reboot again. It worked for me after 3 reboot, strange don't know why.
Lastly, just let you know the 1st partition of the SD card won't show on your phone because theres already internal SD and external_SD folder only show the 2nd partition of SD card. But the 2nd partition won't show on your pc to transfer files, if you know what i mean. Like I wanted to use the 1st partition for music/movies and 2nd for apps (link2sd) but you have to partition the SDcard for the link2sd to work. So the external_SD folder is for 2nd partition, I looked everywhere for the movie on the 1st partition but never found it or maybe I should try root explorer...well I don't know maybe there's someone can help us out about the 1st partition OR maybe just my O3D SORRY for the long reading! lol
I had a partition for apps and one for swap memory on my sd card I removed it from my phone formatted it with minitool partition and now my phone wont recognize it, it is still being recognized by the computer and it is flashed in FAT32 format but by phone wont pick it up not on computer or clockwork mod recovery...what should I do ??/:crying::crying:
format your sd card and then try putting in your phone , also sd external partition should be ext2, ext3 or ext4. If this doesnt work try partitioning your sd card from recovery.
Hi all.... I haven't found specific answers to my questions so am posing them here.
I am running CM11
Can you expand your internal storage without doing an entire ext sd card to internal swap? I want to use only part of my ext SD card to enhance the internal storage.
Is there any point in formatting multiple partitions on the ext SD card as fat32 / ext4 / Linux swap anymore? I thought doing this would have part of the partition used for internal storage and part as the ext sd card storage. Formatting the SD card through CWM deletes all partitions and formats it all as FAT32 for external storage only.
Thanks and go Blaze haha
Dave
You can partition your SD card on your pc into pieces that android won't recognize..follow this as a guide..the program is fantastic
http://forum.xda-developers.com/showthread.php?t=1083863
...sent from a gummed up Nexus 7 using Tapatalk pro mofos...
Thanks ink. I will look at this more tonight but I did use Partition Wizard Home and formatted the first partition as FAT32 which is recognized as the external SD card1 in CM11 but the 2nd EXT4 partition isn't recognized by the ROM it seems. Maybe I just don't know how it would be used but checking the storage in settings didn't have any change to internal.
Hey Guys,
My Phone is a Nexus S with CM-11-20141008-SNAPSHOT-M11-crespo. + CWM Recovery.
Today i have tried to partition my internal sd card, (the nexus s have only the internal sd Card), because i wanted to install the Link2SD app which need a ext4 partition to link the programfiles.
What i Did:
1. Connet the Phone via USB to Computer
2. Mount sd Card
3. Run Minitool Partition Wizard on Windows
4. Delete the Partition on the SD Card
5. Create a Partition, 13GB, Primary, FAT32 for media files
6. Create a Partition 1 GB, Primary ext4, for the programfiles.
7. Restarted the Phone
The Phone is still working, but i dont see the SD Card anymore on my Andorid device. I have also tried to Mount the sd card in the CWM. I tried to do a factory reset and checked the box "format sd card)
Did not work
Can you please help me? How could i restore the lost party of my internal sd card?
Thanks,
Magor
followmagor said:
Hey Guys,
My Phone is a Nexus S with CM-11-20141008-SNAPSHOT-M11-crespo. + CWM Recovery.
Today i have tried to partition my internal sd card, (the nexus s have only the internal sd Card), because i wanted to install the Link2SD app which need a ext4 partition to link the programfiles.
What i Did:
1. Connet the Phone via USB to Computer
2. Mount sd Card
3. Run Minitool Partition Wizard on Windows
4. Delete the Partition on the SD Card
5. Create a Partition, 13GB, Primary, FAT32 for media files
6. Create a Partition 1 GB, Primary ext4, for the programfiles.
7. Restarted the Phone
The Phone is still working, but i dont see the SD Card anymore on my Andorid device. I have also tried to Mount the sd card in the CWM. I tried to do a factory reset and checked the box "format sd card)
Did not work
Can you please help me? How could i restore the lost party of my internal sd card?
Thanks,
Magor
Click to expand...
Click to collapse
You have put your self in a major mess. You should have partitioned the SD card using CWM. Now you can try to partition SD card using CWM just forget the 1Gb partion that you lost.