Related
hi bit stuck here iv got a xperia ray unlocked bootloader cmw and 4.0.2.a.0.62XYH-MOD-Last custom rom kernel 2.6.32.9-v3 iv been trying to get honeycomb blue circle battery with no luck iv got some zip files but when i try and apply them my status bar dissapears any suggestions would be extremely helpful
Is that the icon with the thin blue circle and the number in the middle?
I am unfamiliar with your rom and kernal but I know a similar battery display is available included in other roms like CM9 and such.
Others have had the issue of a vanishing statusbar depending on the CPU governor they are using? Try changing the governor to ONDEMAND or INTERACTIVE if you have the option.
Good luck
Xperia ray bootloop
first off, i'm a noob.
I rooted my xperia ray (ST18i) yesterday and also installed ClockWorkMod 5+ on my phone, as well as ROM manager
I tried installing ROMs and bootanimations; i always got status 7 error, but that's another story
anyway, i tried installing CM10 on my xperia phone
again i got the "asset failed: status 7" error thing
I backed up and tried to reboot but now i'm stuck in a bootloop and i'm even unable to access CWM :crying:
anyone help please?
Thanks in advance
BarnabasEdubio said:
first off, i'm a noob.
I rooted my xperia ray (ST18i) yesterday and also installed ClockWorkMod 5+ on my phone, as well as ROM manager
I tried installing ROMs and bootanimations; i always got status 7 error, but that's another story
anyway, i tried installing CM10 on my xperia phone
again i got the "asset failed: status 7" error thing
I backed up and tried to reboot but now i'm stuck in a bootloop and i'm even unable to access CWM :crying:
anyone help please?
Thanks in advance
Click to expand...
Click to collapse
Ideally you should have created a separate thread for your query since it does not relate specifically to the topic on this one However,
I have found that the best way with these things is to keep it simple. There are two ways to flash a kernal to your phone depending also on the type of file it is.
For CM roms and kernals you can either follow the instructions provided on the CM website using the CMD window (if you use windows OS) or using flashtool v0.9.10.
Flashtool is much easier since all you do is install it, then install the drivers for your phone that come bundled with the software. After that connect the phone in fastboot mode (Hold the volume up button while connecting the USB cable) and then open the fastboot toolbox. You can flash the boot.img file that comes with all CM roms that way and then reboot the phone.
***Before flashing your phone you must ensure that you had "Developer Options" enabled with "USB Debugging". This allows for Flashtool and other methods to access and flash the phone with no problems***
CM10 boot.img contains CWM boootloader and to enter recovery you toggle the volume buttons while the phone starts up. The LED will change colour and CWM Recovery will show up.
Most if not all this information is available under the Ray development section of the forums here:
http://forum.xda-developers.com/forumdisplay.php?f=1351
Good luck
i can't entre in fastboot when i instaled the ics port ... thr rom i not fully working so i would th gb roms ... i trued to downgrade ... installing omap4boot ... but i can't entre in fastboot ... when i unplug the battrey and press vol up and conect usb cable .my pc detect the phone but quikley it deconect the action sycron all the time..fastboot isn't stable plz help
bro
you need to update drivers .
open device manager ,, start menu --> search --> ''device manager''
now when you connect the phone without battery you will see a device appears for about 3 seconds ,, in these three seconds do a fast right click on it .
then choose ''update driver'' ,, ''scan my computer.....'' ,, now choose the folder (----/omap4boot/usd_drv_windows) ,,
it will give it an error just select ''install this driver any way'' .
Good Luck .
OS_Hacking said:
you need to update drivers .
open device manager ,, start menu --> search --> ''device manager''
now when you connect the phone without battery you will see a device appears for about 3 seconds ,, in these three seconds do a fast right click on it .
then choose ''update driver'' ,, ''scan my computer.....'' ,, now choose the folder (----/omap4boot/usd_drv_windows) ,,
it will give it an error just select ''install this driver any way'' .
Good Luck .
Click to expand...
Click to collapse
i can't ... i tried many times ... can i flash a zip via recovery to fix this ... ? any other solution plz?
AW: i can't entre in fastboot mode
Which os (windows etc.) Do you use?
Sent from my LG-SU760 using xda app-developers app
hello guys, pls help. am able to install the fastboot and boot into it....but when my phone gets into fastboot, the pc does not find a driver for it. I have tried all the LG drivers from the LG website but they dont work. someone pls share the correct fastboot driver for su760
Depending on what guides you guys are using and what operating system you're using the steps are different.
The OP's issue is downloading the OMAP4430 drivers and manually installing them through the device manager when the device pops up upon connecting your device without the battery.
As for the person above this post, it seems like you need to install the LG COSMO drivers.
Both of you can find the drivers in the latest version of wkpark's bootloader.
Sent from my LG-P920 using xda app-developers app
Hi all. I got the same issue. Can't boot into fastboot, only flashlights are on, nothing else tried to reinstall all drivers - nothing
ok, please please some help me.
When i install the custom rom (3dmax ported from 920), i lose the imei and network.
but when i revert to the korean stock gingerbread, everything comes back to normal.
Now with the stock, some USSD features dont work properly, like when I dial *335# (i dial this to subscribe for an internet bundle), there is a menu that should pop up with 5 options like this:
1. blablabla
2.blablabla
3.blablabl
etc
so with this korean rom, am only able to see option 1, the other options are hidden and i cant scroll down. I think this is a dialer issue. even the fonts look like a noob was typing them with an old typewriter coz the fonts are not centered nor justified (microsoft word jargon).
So if someone can show me how to replace the dialer with the one from the custom rom, or point me to a stock ICS rom for the su760, not ported one please, I dont need any customized or fancy roms, just a stock rom that should make the phone work like a normal phone.
kachmul2004 said:
ok, please please some help me.
When i install the custom rom (3dmax ported from 920), i lose the imei and network.
but when i revert to the korean stock gingerbread, everything comes back to normal.
Now with the stock, some USSD features dont work properly, like when I dial *335# (i dial this to subscribe for an internet bundle), there is a menu that should pop up with 5 options like this:
1. blablabla
2.blablabla
3.blablabl
etc
so with this korean rom, am only able to see option 1, the other options are hidden and i cant scroll down. I think this is a dialer issue. even the fonts look like a noob was typing them with an old typewriter coz the fonts are not centered nor justified (microsoft word jargon).
So if someone can show me how to replace the dialer with the one from the custom rom, or point me to a stock ICS rom for the su760, not ported one please, I dont need any customized or fancy roms, just a stock rom that should make the phone work like a normal phone.
Click to expand...
Click to collapse
Do what i did: download stock ICS rom V28b KDZ! Flash it in lg kdz updater - i will get your imei back, working ussd and stock lgs ICS. Links are in android developement
TheFirlen said:
Do what i did: download stock ICS rom V28b KDZ! Flash it in lg kdz updater - i will get your imei back, working ussd and stock lgs ICS. Links are in android developement
Click to expand...
Click to collapse
I need for su760, not 920....I cant find the link for it.
kachmul2004 said:
I need for su760, not 920....I cant find the link for it.
Click to expand...
Click to collapse
U can try flash this: http://forum.xda-developers.com/showthread.php?t=1956347 i flashed this too but i lost imei so watch out
Hi peeps...
I got a situation here with my a850. Before, I'd just bricked my phone after done flashing some roms from needrom.com. then my phone just dead & cant even to switch it on. Later I managed to get it fix by flashing this rom A850_S203_140208 and turn out to be ok. Get it rooted with Framaroot & get back my imei with Mtk Droid Tools also get rid out of Chinese bloatwares & apps with that software.
Now when I try to flash another rom, it get stuck with A850_S203_140208 Chinese logo. Then I had to restore it back to where it was.
Is there someone willing to help me out?
I guess you have to flash to s121 as most ROMs are based on it
a850 rom are not suitable for a850i . thats why. find the one for a850i .
What do you mean? Is S121 ROW is compatible with this S203 CN? I wanna try it if yes...
Who come here because want to fix phone won't turn on and pc won't detect is easy..
First, remove battery and connect your phone then press Power + Volume Up + Volume Down.
Then, your PC should detect your phone but wait.. you can't install them yet..
After that, find your stock firmware compatible with your phone (if you don't know, you should find it, or you can download all files about Lenovo A850 then test one by one)
Crap, disconnect your phone from. Then, load scatter file then untick all except PRELOADER, choose Download Only then it will flash. Connect your phone then press as it mentioned..
After that, you are done at fix PC not recognize the phone... after this settled.. flash the rom as well.. use the compatible only!! if you use the same.. the same things will happens..GOOD LUCK
Leagoo Elite 1 Root/TWRP/SuperUser
I give no guarantee for this to work and take no responsibility for any damage you do to your phone, I have this working 100% on my Leagoo Elite 1 that shipped with version 1013 of firmware.
Installed from Windows 7, I make no claims on other versions of Windows.
REQUIREMENTS:
Functioning brain
ADB Installed correctly (Guides on XDA)
VCOM Drivers (Comes with SP Flash Tool)
SP Flash Tool ( http://spflashtool.com/ )
Stock Rom ( http://www.needrom.com/download/leagoo-elite-1/ )
TWRP Recovery from this post ( http://forum.xda-developers.com/showpost.php?p=63692847&postcount=85 ) (Thanks to yankeeboy)
KingoRoot ( https://www.kingoapp.com/ )
----------------------------------------------------------------------------------------------------------------------------
GUIDE:
Firstly, BACKUP EVERYTHING YOU DO NOT WANT TO LOSE!!!
Flashing any rom will wipe all data from the phone. If there is anything you want to keep, take note of it now and back it all up! If you do not know how to do this, either turn back now, or go find a guide for it.
MAKE SURE YOUR PHONE IS AT LEAST 60% CHARGED SO IT DOES NOT DIE AND BRICK ITSELF WHILE FLASHING
Step 1 - Install/extract all programs mentioned above (ADB, VCOM, SP Flash, KingoRoot) and download Stock Rom and TWRP Recovery. Extract stock rom and twrp recovery from their zip/rar into their own folders.
Step 2 - SETTING UP FOR ROOT
-Open up Sp Flash Tool (flash_tool.exe(run as admin to be safe if applicable))
-Click download tab up the top
-Click Scatter-Loading button
-Navigate to "MT6753_Android_scatter.txt" in the extracted ROM folder
-All sections in the table should fill out with files (If they don't, ensure the rom was extracted properly)
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Android to make sure all is well
Step 3 - PUSHING TWRP RECOVERY TO PHONE
-Open up SP Flash Tool again and it should load up the previous scatter file (If not, simply navigate to the same txt file mentioned in the last section)
-Uncheck all the boxes to make sure you don't reflash the whole Rom
-Click the box underneath LOCATION and across from RECOVERY
-Navigate to the "recovery.img" extracted from the TWRP zip/rar
-Double check the recovery box is the only one checked
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Recovery (Volume Up + Power) to make sure all is well
-Set language if required and reboot back to system (DO NOT INSTALL SUPERSU IF IT ASKS FROM HERE)
Congratulations you now have TWRP Recovery.
Step 4 - ROOT WITH KINGO ROOT
-Connect phone to PC
-Go to phone settings, "General Setting", "About Phone", Tap "Build Number" until it says you are now a developer
-Hit back, go to Developer Options, Turn on USB Debugging and go back to home screen
-Run Kingo Root on PC
-Kingo Root should detect your phone accurately and tell you what to do from here to finish the root
-Wait potentially a VERY long time for everything to install depending on your PC/Internet connection
-If you see a blue app with a tick on your phone screen, then root is good!
-Go to your phone dialer and dial *#*#3646633#*#*
-Swipe right to the "Log and Debugging" tab
-Tap User2Root then Root
-Get "BusyBox" app from Play Store and install busybox (this may not be 100% necessary but makes sure all is installed correctly)
Phone is now rooted, check with any root checker if desired
----------------------------------------------------------------------------------------------------------------------------
From here it is easy to do anything like install Xposed framework and mads etc.
For the Leagoo Elite 1 you will want this version of the framework or a later update of the SDK 22/ARM64 version http://dl-xda.xposed.info/framework/sdk22/arm64/xposed-v86-sdk22-arm64.zip
Just flash using Flash Fire, there are many tutorials for how to do this.
hello, i own a leagoo elite 1 and theres a virus (downloaded via playstore, and grand permitted by mistake) . i used custom recovery to wipe everything, format, flash new rom , etc and virus is still there every time i boot. its a clock wallpaper that comes up and dont let you use touch screen or see behind it.
any idea how to get off this thing?
(i dont even know its name,and no antivirus can even notice it. it was installed as an unroot app via playstore
thanks
Hey mate, sounds like it has made its way into your recovery and is getting through that way. Have you tried using SP Flash Tool to flash a stock rom and stock recovery?
If that doesn't work, or you have tried that already, see if you can reroot, and then freeze the app with Ice Box off the Play Store.
Hope that helps.
hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks
Hmmm without knowing which app from the Play Store it was that did this, I don't think I'll be able to help much. If a full flash (system/data/recovery/everything) and wiping dalvik cache etc. hasn't stopped it I'm at a loss for what to do. If you can, try and find the name of the app and I'll look into it
I am using the ROM stated in my guide from NeedRom "X5601_OTD_ELITE_5365U_V1.3.1_S1019-s7yler" direct link to download here: Leagoo Elite 1 ROM V1.3.1 S1019
Try flashing this rom in full if this isn't the one you were using. It works 100% on my phone, no issues at all since install.
i used an "unroot" app (there are two in playstore that comments say that bricked phone) it might be one of them, but theres no unroot app in my phone. its hidden i think...
the rom that you use is a custom one? i have to try a custom one to see if something fix this thing.
i wipe everything, i resize, change format to sd, internal sd, system etc, but its still there.
the only thing that i see in recovery after wipe system, is that i have 3 mb used in system after format system and wipe system. well is there a way to format system via adb ..?
im suspicious about theese three megabytes...
thanks
first of all thank u for instructions on how to instal custom recovery
few months ago i was able to root my phone with kingroot,tried 2 or 3 times before succes
then i did unroot because phone display died and i didnt want to mess with guarantee so i unrooted phone, now when it came back from fixing i didnt manage to root with kingroot even with desktop version, i did everything like u said in instructions and everything is ok but when i try to root, on 75% phone restarts and i get message root failed, i noticed that kingroot app doesnt recognize my phone when i connect it as usb storage but only as mtp device, could that be a problem?
and yeah i managed one time to gain root access when phone restarted, kingo finished his job to 100% and said that it have root access now but when i restart phone it gets stuck on leagoo screen and wont boot.
i entered recovery to try clearind dalvik/cache, phone opened me stock recovery (i flashed philz and it was working when i checked for success) is there anyone who had this issue and how can i fix it, i really need root because of things like cpu control,battery consumption is really big on stand by
for 2400mah battery even a clock is big consumptor
cheers
Edit: cause i did this process few times im not sure that i did that thing with phone dialer code, is it crucial for this. i didnt think it is cause first time i rooted my phone i didnt know about that and it worked for me without it
---------- Post added at 08:16 PM ---------- Previous post was at 07:48 PM ----------
androidenth said:
hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks
Click to expand...
Click to collapse
I had similliar issue,I don't know where I downloaded it,app is add contacts.it came out of nowhere when I played game askin g me to install,like when you click on apk file. I found 7 or 8 copies of that apk I cache folder, and deleted them but as soon as I leave that folder new apk appear with same name, later I found two files txt I think,with some numbers and add contact at the end of name and I changed their permission with root explorer, for now I don't have any issues with this app,I can't delete this files but at least I can stop them from working
Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?
skinheadXhc said:
Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?
Click to expand...
Click to collapse
All kind time of day. I apologize in advance for my English. I use a translator. Please help. Some time ago I tried to install root on my phone Leagoo Elite 1. I on XDA forum advised to install the firmware version S1019 I did all the instructions but the phone does not start at all. Not respond to any buttons. I tried to reflash the phone to another firmware version. All versions that I tried just successfully installed but the phone still did not want to run. The only firmware version that ran the phone version S161210. But this version runs very slow. Please give me some advice what should I do?
Hello
I have a leagoo elite 1 and i have a problem with slow charging , i know the phone dosent support fast charge but i dosent mean to charge 3.5 to 4 min 1% , and i want to know if your elite 1 is charging like my elite 1. Any ideas it would help me , and excuse me for my poor englisht but i think you understanding me.
No sound after flashing phone
Hi all,
A couple of days ago I flashed Leagoo Elite 1 with the latest rom. After flashing the phone loudspeaker stopped working. I've downloaded the original rom from Leagoo website (stock rom) and tried to flash the phone again but still don't have sound on loudspeaker.
Just to mention that sound is working when I use the headphones. I guess problem is in problematic firmware.
Any advice how to fix this?
Thanks
Hello Guys i am From Bulgaria Sorry for my Bad english my problem is i have lenovo s820 Work Perfectly on 4.2.1 Version but one day he update 4.4.2 and menu was Chinese Language and Keyboard and Not have Google Play i download Stock Rom 4.2.1 From official Website but problem is When i connect phone Computer not have sound when Phone is connected and not show in device manager nothing just phone show baterry is charging i soft Reset 2 times not work Clean charge place not work Then i Root Phone With Kingoroot and i flash Twrp Recovery Then Phone Restart and not show nothing only black Screen and low Light not show Lenovo Logo no sound when i try to flash With Sp flash Tool just phone is not detected.. i Try Recovery Menu but he have only this settings Reboot,Install Package Update wipe user data, Power Off When i click on install package Update and show me Now system Will install Update.zip of Root Directory and i Press YES and i have error this install failure i cant use Flash Tool becouse my PC not Detecting Phone i try on other computer 5 diffrent cables but not work Please help meee