hi to make recovery to the phone, download kingsoft root and root it then download mtk droid tools and moboginie, install them then connect your phone to mobogenie then open mtk droid tool and click root on the phone click agree ,and wait the yellow box to turn green if it doesn t reconnect and connect the phone then go to the second window on mtk droid tool and click recovery and boot from phone and keep clicking yes if it fail download this boot and recovery and use them with the same method just in recovery and boot click on choose boot.img and then it will ask you to install the recovery to phone click yes and u finished
this is the original boot and recovery of this device:
stock boot: XXX.dropbox.com/s/271kexxy4hqfett/boot%20org.img?dl=0
stock recovery: XXX.dropbox.com/s/n27w3623tpqq28g/recovery%20org.img?dl=0
Related
Steps for flashing Recovery using SP Flash Tools:
Install drivers for your phone.
Open the SP Flash Tools(download from moulnisky.com or search in google).
In SP Flash Tools, Click on Scatter-Loading and select the MT6592_Android_scatter.txt
Check only recovery.img (select recovery.img by clicking on location corresponding to recovery in sp flash tool) and uncheck all others.
Switch off your phone.
Click the Download option
Connect your phone now. The Flash Tool will start the flashing process, the progress shown at the bottom with yellow progress bar. (Don't interrupt this process as it can potentially brick your device).
A green ring will appear showing that the process was successful.
Disconnect & Reboot your phone.
Note: Use Laptop for flashing to ensure uninterrupted power supply
Rooting
After flashing recovery, flash attached zip from recovery for root
At last i hav rooted my a300 :d
Worked Like CHARM HAppy Just missing is below touch buttons which is in CTR 6.0.4.4
how to enter in recovery
I am not able to install any zip in this recovery it says cant mount emcc or sd card wat to do?
recovery says
cant mount emmc or sd card
T26 version partition is different Please Help Same issue on all recovery
You will need TWRP recovery to root and also to flash custom roms on your kitkat Lenovo.
Code:
I am not responsible for any wrong processes done by you. If you point me for any harm caused, I will laugh at you. This procedure is tested by me and works perfectly. You should be free of tension ;)
DOWNLOADS:
VCOM drivers: Windows XP, Vista, 7
Windows 8 or up follow this procedure for installation.
TWRP_S660CN ↦ Contains recovery.img and android scatter file that needed to flash with flash tool, this only for CN firmware
TWRP_S660EU ↦ Contains recovery.img and android scatter file that needed to flash with flash tool, this only for EU firmware ROW version
SP Flash Tool v3.1328 ↦ Recommended using this version but there is a possibility that we must use the newest version.
PROCEDURE:
Download all required files, place it at same folder for easy organized it. Extract SP Flash Tool v3.1328 and TWRP_S660EU on the same folder. Make sure you already completely installing USB VCom driver before continued to next step.
Go to flash tool extracted folder and run Flash_Tool.exe, if you are using windows 7 or later please ensure that you running it using administrator privilege, on the flash tool check DA DL All with Checksum option. Now click on Scatter-Loading button and point it to TWRP_S660EU extracted folder and select MT6582_Android_scatter.txt, this will load recovery.img to flash tool.
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
When finish with flash tool, now press Download button or hit F9. This will show pop up that told not all images loaded correctly, just click Yes button. And flash tool become stand by mode waiting connection from your device.
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
Now turn off your device and remove the battery, connect your device with USB cable data to your computer, if USB VCom driver installed completely then flash tool will recognize your device and begin to start flashing process. This process only take 2-3 minutes and when you see GREEN CIRCLE in the middle of flash tool you save to disconnect your device
Install TWRP 2.7.1.1 on Lenovo S660 Running Android 4.4.2
Done, congratulation you already finish change your Lenovo Standard Recovery with custom recovery TWRP v2.7.1.1. confirm it with go to recovery mode turn off your device and then turn on with press and hold Power Button + Volume Up + Volume Down button until you can see TWRP v2.7.1.1 main menu.
Additional Courtesy: Andy Suwito and TWRP Devs
Rooting thread coming soon
HIT THE THANKS :good: BUTTON IF I HELPED U IN ANY WAY
It dosen't worked out.
It shows green circle . But when we go to recovery the same factory mode is opening there .
Nothing changed.....
Booting on recovery is impossible without PC on my Samsung Galaxy S Duos 2.
[CyanogenMod version]
12.1-20160306-UNOFFICIAL-kyleprods
[BEFORE]
My phone was bricked last week when I tried to reboot to recovery. Luckily, I unbricked it through Odin3.
[FLASHING WITH PC]
Flashing the TWRP recovery through Odin3 forces it to go to recovery.
[WITHOUT PC/MANUAL]
It gets stuck on Samsung Logo with a small red exclamation mark on the upper left portion of the screen.
[DOWNLOAD MODE]
I can boot there and it can be recognized by Odin3.
Please help. I just want to reboot to recovery without PC.
Resonas4216 said:
Booting on recovery is impossible without PC on my Samsung Galaxy S Duos 2.
[CyanogenMod version]
12.1-20160306-UNOFFICIAL-kyleprods
[BEFORE]
My phone was bricked last week when I tried to reboot to recovery. Luckily, I unbricked it through Odin3.
[FLASHING WITH PC]
Flashing the TWRP recovery through Odin3 forces it to go to recovery.
[WITHOUT PC/MANUAL]
It gets stuck on Samsung Logo with a small red exclamation mark on the upper left portion of the screen.
[DOWNLOAD MODE]
I can boot there and it can be recognized by Odin3.
Please help. I just want to reboot to recovery without PC.
Click to expand...
Click to collapse
Step 1: Install the Rom Manager app on your android device.
Step 2: Open the app and it will show you “Flash ClockWorkMod Recovery” tap on it and proceed further.
Step 3: Wait for several minutes as the latest version of ClockWorkMod Recovery is been installed.
Step 4: As everything gets completed and the device reboots into android. Open the Rom Manager app again and verify that you have successfully flashed the custom recovery. The app should show you that you have installed ClockWorkMod recovery....
2nd method
>Installation Guide< (For Rooted Users)
Using Mobileuncle Tools/Mtk Devices
Step 1- Download and install Mobileuncle tools app. (http://www.apk20.com/apk/291087/).
Step 2- Download CWM/TWRP recovery file of your device and rename it to recovery.img .
Step 3- Open mobileuncle tools and click on "recovery update" there you will find recovery.img on the top, select it. Press OK it will reboot your device into your required recovery.
DONE!!
hit thanks if i help you
My device is SAMSUNG GALAXY Ace 4 LTE SM-G313F
I had rooted my phone with Kingoroot recently
all were fine,,
but i had this problem that even if i had installed clockworkmod CMW, it always boots into Android stock Recovery,,,,,,,,,,,
i tried to install PHILZ RECOVERY to fix it as i heard that installing Philz will boot us to CWM instead of stock recovery........ it failed wen i tried to install Philz via Odin............
i had Rom Installer app installed on my device,,
i clicked on Install Zip frm Sd card.. it restarted and then it started bootlooping.............................
forever
and also with a red exclamation mark on top............
all i can do is to go to DOWNLOAD MODE...
plz help me guyzzzz plzzzzzzzzzzzzzzz
Go in download mode and then flash your recovery if that doesn't work for you then try this :
Download platform tools from Android developers page and copy you recovery in the same folder as adb->platform tools open a terminal there by shift+right click and in your phone to into download mode and type "adb devices" and hit enter if it shows a vu6t579chv something like that and next to it fastboot then type "fastboot flash recovery name_of_recovery. file_type" and hit enter. Reboot into for you phone or stock recovery. Look that part up.
Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM