Hello everyone,
My name is Medo from Great Yemen, and tried to root my phone lenovo VIBE Z using the instructions from this video
Video Name: How to Root the Lenovo Vibe Z K910 & Install Google Apps incl. Play Store
Channel: C4ETech
This might worked if link 4 was working in a proper way and if Lenovo system was not updated. But the thing is the system was recently updated with 1.5GB new system, even lots of featured changed in it.
At this moment of writing this post, the phone is on the Boot Mode, and the Lenovo logo are there.
While doing the rooting, a message appeared saying "locked" after that the phone didn't turn on/off
While following the steps from the video, these are the commands that had been typed
adb devices
e7625378 was the reply for the command
adb reboot-bootloader
The error appears about the locked
fastboot boot recovery.img
Thanks a lot and welcome to Great Yemen
Hello, my name is Alberto, i've a big problem with my tablet.
I've tried to root the device but probably i have choosen the wrong rooted system maybe from another region, so now the tablet stay always on the asus logo and i can't enter in recovery modo to upgrade the firmware.
If i try to enter in recovery mode i see a screen with the usb cable in the centre and starting from left on top the following commands :
Droidbot provision os
IFWI version 51.33
serial num . 1111111111111111
Droidboot version : local build or english version
After, all the command with volume up and down for :
Reboot droidboot
reboot
factory reset
sd download
power off
Down in can see :
E: unable to open debricking
Fastboot init...
Fastboot CMD WAITING...
That's all.
I don't know what to do to unbrick the tablet, before was android 4.3 but now i don't know what i have done.
Please help me if you can with instructions and programs to use.
The device is not seen by my pc with seven and if i try to flash the original asus upgrade it fails.
Hope you can help me.
Sorry for the disturb guys.
Thank you.
Alberto
Gabbathe said:
Hello, my name is Alberto, i've a big problem with my tablet.
I've tried to root the device but probably i have choosen the wrong rooted system maybe from another region, so now the tablet stay always on the asus logo and i can't enter in recovery modo to upgrade the firmware.
If i try to enter in recovery mode i see a screen with the usb cable in the centre and starting from left on top the following commands :
Droidbot provision os
IFWI version 51.33
serial num . 1111111111111111
Droidboot version : local build or english version
After, all the command with volume up and down for :
Reboot droidboot
reboot
factory reset
sd download
power off
Down in can see :
E: unable to open debricking
Fastboot init...
Fastboot CMD WAITING...
That's all.
I don't know what to do to unbrick the tablet, before was android 4.3 but now i don't know what i have done.
Please help me if you can with instructions and programs to use.
The device is not seen by my pc with seven and if i try to flash the original asus upgrade it fails.
Hope you can help me.
Sorry for the disturb guys.
Thank you.
Alberto
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck
Hello Friends
I recently flashed my lenovo yoga tab 2 pro 1380l -android tablet with stock rom of lollipop. flash was 100% succesfull but after reboot this screen with some complicated text appeared. i tried flash again and again but it came every time . I tried typing "exit" with the help of external keyboard but nothing worked out so far. i tried to get bios setting but none of the combination of buttons but that also didnt work out. please help . screen text is attached with this thread.
khushal yadav from india
https://drive.google.com/file/d/1fGOMuSGF6PZXi4mILxuT3GFoD9rLw9C4/view?usp=sharing[/IMG]
Hello all members,
I recently bought a China made android tablet with android 5.1 lollipop when I was trying to flash twrp with adb after flashing twrp and last ASB command which was for rebooting device it got stuck at restarting continuously I tried to hard reset for this I pressed col + and power button then a select boot menus appeared when I was selecting recovery mode the selecting key which was vol - not worked and since then I tried many fixes but nothing happens.
My problem is a db is not detecting device-
Error: port 5037 and device not found I have updated win 10 and adb 15 second latest version.
So flash tool -
Error : 4001 error and many errors, unable to flash a ROM which is of device equivalent of mine I can't find any original stock ROM because it is unbranded Chinese tablet .
Tablet original specs -
CPU - MT6592
RAM - 1/2 GB DDR2
Internal storage - 12/16 GB
OS - android 5.1 lollipop
Kernel - 3.10.72
Non removable battery.
This device causing trouble for me I paying attention to this since many days .
I request for help to all the respected members please try to help me .
Any kind of help will be grateful to me.
Thank you all
Sincerely
Shubham.
-flash the wrong twrp in recovery
-phone boot loop
-every 5 seconds phone will restart
-cant turn it off except waiting it to drained its battery or unplug the battery from the inside(don't have tools can't do it)
-cant go to bootloader
-BUT it kinda respond to power + up it made the logo blinked instead of vibrating and reboot if keep doing that the logo is just gonna blink
-can the orange state be remove?
-wont respond to any input other than "power + up"
-tried flashing but CANCEL CUZ IT REBOOT
-for me it's theoretically impossible is there a way to force it into bootloader without doing inputs cuz I can flash rom during it's black screen phase
use sp flash tool and flash stock boot.img
is there a website where we can find stock roms? I bricked my phone trying to install the wrong twrp for infinix hot 11s nfc. Thanks.
Does somebody have the stock rom for Infinix Hot 10 Play X688B?
There is the builder number X688B-H659ABCEFGHI-Q-GL-220109V524
django123321 said:
is there a website where we can find stock roms? I bricked my phone trying to install the wrong twrp for infinix hot 11s nfc. Thanks.
Click to expand...
Click to collapse
Download Infinix Stock ROM for all models (Latest Firmware)
Download the latest Infinix Stock ROM Firmware (Flash File) for all the available Infinix smartphones, feature phones, and tablets.
androidmtk.com
Also posted this link to another thread. Not sure about the legitimacy, but this is the only site I could find with XOS roms. Some xda forums has some stock images but they are way older.
I got working solution same as you. If you still can't fix it. Let me know i have the solution.
boomzkik said:
I got working solution same as you. If you still can't fix it. Let me know i have the solution.
Click to expand...
Click to collapse
Hey could you send it to me? I’m having this problem too
Hammy69 said:
Hey could you send it to me? I’m having this problem too
Click to expand...
Click to collapse
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
boomzkik said:
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
Click to expand...
Click to collapse
Hey i did all the steps but i get this problem. I uninstalled and reinstalled UsbDk but it still doesn't work.
Code:
[2022-04-10 01:49:37.392714] Waiting for device
[2022-04-10 01:49:37.393861] Found device = 0e8d:2000
Traceback (most recent call last):
File "C:\Users\eaman\src\device.py", line 84, in find
self.configuration = self.udev.get_active_configuration()
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 921, in get_active_configuration
return self._ctx.get_active_configuration(self)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 113, in wrapper
return f(self, *args, **kwargs)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 249, in get_active_configuration
self.managed_open()
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 113, in wrapper
return f(self, *args, **kwargs)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\core.py", line 131, in managed_open
self.handle = self.backend.open_device(self.dev)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 804, in open_device
return _DeviceHandle(dev)
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 652, in __init__
_check(_lib.libusb_open(self.devid, byref(self.handle)))
File "C:\Users\eaman\AppData\Local\Programs\Python\Python310\lib\site-packages\usb\backend\libusb1.py", line 604, in _check
raise USBError(_strerror(ret), ret, _libusb_errno[ret])
usb.core.USBError: [Errno None] Other error
boomzkik said:
Hi follow this steps.
1st - go here and setup this one https://github.com/MTK-bypass/bypass_utility and download also the exploits_collection
2nd - after installing those tools I mention, power off the android device
3rd - run the main.py python on cmd
4th connect your android device on your laptop and wait for it to bypass the mtk
5th - download the official firmware of infinix hot 10 compatible with your device
6th - download spflash tool and flash it and voila your phone will be alive again
let me know if you still have question or if you can't reproduce it.
Click to expand...
Click to collapse
Hey man! I was having the same issue with my Infinix Hot 10s x689B since yesterday. I tried to flash orange fox custom recovery and now my phone is constantly getting restarted to the infinix title screen in a loop. I followed ur instructions to the 4th point. Now my phone has stopped the "boot loop" thing. What to do now? How can I flash the official firmware? If I try to boot the device again, the loop resumes. Can you please help me?