Lenovo Yoga Tab 2 Pro 1380L stuck at boot after rom flash - General Questions and Answers

Hello Friends
I recently flashed my lenovo yoga tab 2 pro 1380l -android tablet with stock rom of lollipop. flash was 100% succesfull but after reboot this screen with some complicated text appeared. i tried flash again and again but it came every time . I tried typing "exit" with the help of external keyboard but nothing worked out so far. i tried to get bios setting but none of the combination of buttons but that also didnt work out. please help . screen text is attached with this thread.
khushal yadav from india
https://drive.google.com/file/d/1fGOMuSGF6PZXi4mILxuT3GFoD9rLw9C4/view?usp=sharing[/IMG]

Related

HELP ME PLEASE ( TOUCH SCREEN PROBLEM ) flash issue

hi i have an allwinner tab similar hardware to ainol novo 7 advanced
i flashed few firmwares on it of different tabs( ployer momo 9 , ly f1) and they were working good
except novo 7 advanced firmwares ( touch was not working at all )
then i flashed a different firmware(onda v140) on it and the screen went white when powered on .
then again i flashed my default firmware everything is working now but touch screen is responding very differently . this is a capacitive touch . i have even tried flashing those firmwares which were working perfectly before but now the problem is common in all firmwares i flash .
see the video
http://www.youtube.com/watch?v=T1IZqA-verU
then after that i tried flashing onda firmwares for 7 inch tablet that has auto recalibration of screen function after flash.
the touch points changed from previous one.
now my question is since this is a software/drivers issue how can i get it back
is my tablet bricked ? any chance f bringing it back to life.
rest everything is working fine including camera. and i am able to use adb on pc and run commands easily ..
please help anyone
please please please !!
thanks
the firmware that i flashed accidentally was for 9.7 inch tablet and after that the controls changed .
does any one has a solution
same thing happened with another guy .
http://www.pandawillforum.com/showthread.php?7918-momo9-touck-problem-please-help-me!!
same problem . please somebody help
have you tried to shutting it down by holding power button for a long time (it will skip the do you want to shutdown option) and turn it back on again?
i had a trouble once with mine. a lot of resets (the small hole button) and reflashing ICS did not help. but strangely when i shut it down normally like that, it came back normal
edited: sorry if it doesnt work, my problem came suddenly, not because of changing firmware.
Don !
I Know how to make you solve your prob ! Just flash momo9 compatibility 1.2.0.zip:good:

Problems after installing the ROM ( Lenovo A2107A-H)

Hello Friend
After I root the device and install ROM manually by Lenovo recovery mode, I found that the tablet stays ahead of the Lenovo logo goes, I have gone several ways, several opened a factory reset and wipes, but I did not, my friends, if you I appreciate your advice.
My device : Tablet PC Tab A2107A-H Model name : 60015
tnx

[Completed] Lenovo K3 Note screen is not working after flashing rom

Hello,
I just bought a Lenovo K3 Note. It arrived with chinese stock rom. I tried it for about 10 minutes and everything was working fine. I decided to flash ROW (Indian stock) rom but after flashing rom with sp flash tool the phone screen only shows black and white lines. When turned on the phone vibrates and makes starting sound but nothing meaningful on screen. It looks like a hardware problem or display driver problem but it happenned after flashing rom. I tried flashing different roms but the result is the same everytime. What should I do?
Note: I cannot put an image here showing the problem because Xda doesn't allow external link.
melihtas said:
Hello,
I just bought a Lenovo K3 Note. It arrived with chinese stock rom. I tried it for about 10 minutes and everything was working fine. I decided to flash ROW (Indian stock) rom but after flashing rom with sp flash tool the phone screen only shows black and white lines. When turned on the phone vibrates and makes starting sound but nothing meaningful on screen. It looks like a hardware problem or display driver problem but it happenned after flashing rom. I tried flashing different roms but the result is the same everytime. What should I do?
Note: I cannot put an image here showing the problem because Xda doesn't allow external link.
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
Please post your question here:
http://forum.xda-developers.com/showthread.php?t=2257421
You'll find expert advice there.
Good luck!
Thread closed.

Lenovo a850 Bricking again ana again

Hi My Lenovo a850 was working very well but when I had rooted this device and flashed twrp recovery since that time It bricks continuously I have flashed stock rom multupt times then it works 7 8 days some times 30 days then when it gets switch off then it don't boot it stucks on Lenovo logo how do I fix this

Lenovo Tab 4 8" (tb-8504f) bricked !!! Help needed

Hello XDA people! I yesterday tried to flash my Lenovo tab 4 8 tb-8504f with custom ROM but the custom ROM had some issues. I tried back to restore the Stock firmware using QFIL but I got my tablet bricked. Only charging light is displayed while connecting to PC and the screen is blank. Can you suggest me how to revive my bricked Lenovo tablet? Thanks.
adnan.siddiqui said:
Hello XDA people! I yesterday tried to flash my Lenovo tab 4 8 tb-8504f with custom ROM but the custom ROM had some issues. I tried back to restore the Stock firmware using QFIL but I got my tablet bricked. Only charging light is displayed while connecting to PC and the screen is blank. Can you suggest me how to revive my bricked Lenovo tablet? Thanks.
Click to expand...
Click to collapse
The red charging light means it's in flashing mode from what I gather. see if you can flash it with Lenovo's official tool. https://support.lenovo.com/au/en/downloads/ds101291

Categories

Resources