My son's nexus started rebooting on its own here and there a little less than a month ago. Last week it started boot looping. I would have to turn it off(only worked sometimes by going into fastboot mode). Tried resetting and wiping in recovery with no luck. This problem gets worse when it's plugged up to a computer the phone turns into a reboot machine. I read up it could be the power button and took it apart to find the button works fine (still cleaned out though). Any ideas.
Sent from my Nexus 6 using Tapatalk
Sounds like a software issue to me, is it stock or custom?
Sent from my XT1526 using Tapatalk
soupysoup said:
Sounds like a software issue to me, is it stock or custom?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
It's stock. Also getting this message in recovery when trying to factory reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
Yeah stock recovery doesn't really allow anything, its more locked down than anything, my suggestion to u would be root it, grab a aosp ROM or something that looks stable from one of the development threads, if I could I'd suggest Beanstalk, I was a part of that development team for a long time and its an awesome upgrade from stock, I'd grab a twrp recovery, unlock the bootloader and flash recovery, then wipe everything and install a ROM, shouldn't have any issues after that, and if u do, then its hardware
Sent from my XT1526 using Tapatalk
Can't root or unlock it. Once I connect it to a computer through USB it goes into crazy reboot mode. Won't go past the Google screen.
Sent from my Nexus 6 using Tapatalk
The phone won't stay in fastboot mode?
audit13 said:
The phone won't stay in fastboot mode?
Click to expand...
Click to collapse
Sometimes it will
Sent from my Nexus 6 using Tapatalk
If it stays in fastboot mode, use the fastboot command "fastboot erase userdata" and "fastboot erase cache" and see what happens. If these commands fail, the emmc in the phone could be dying.
Not sure how to do that
Sent from my Nexus 6 using Tapatalk
Well using the root toolkit on got it to the point of the unlock screen and selected yes then when it reboots it just stays on the boot screen. Have to use the toolkit with fastboot screen since I can't install drivers for the toolkit to recognize the phone.
Sent from my Nexus 6 using Tapatalk
Have you had success at unlocking the bootloader? If you unlock it, does it relock when the phone is rebooted? If the answer is yes to both questions, I think it's time for a replacement motherboard.
audit13 said:
Have you had success at unlocking the bootloader? If you unlock it, does it relock when the phone is rebooted? If the answer is yes to both questions, I think it's time for a replacement motherboard.
Click to expand...
Click to collapse
It unlocks but then when it tries to reboot it just stays on the Google boot screen. When I put it back into fastboot it shows as locked still. So I guess it's the motherboard then.
Sent from my Nexus 6 using Tapatalk
Yup, time to find a Nexus 5 with a smashed screen and working internals. I've done the motherboard swap for a few N5s.
check for the infamous power button fault. that can easily cause endless reboot cycle.
I have never come across a situation where the power button causes the bootloader to relock itself when the phone is rebooted.
1plus said:
check for the infamous power button fault. that can easily cause endless reboot cycle.
Click to expand...
Click to collapse
I posted in the op if ruled out power button ad on taken out apart already and checked that first. Exactly once it says unlocked and tried to reboot it stays in bootloop then when I force it into fastboot it shows as locked still.
Sent from my Nexus 6 using Tapatalk
djj624 said:
I posted in the op if ruled out power button ad on taken out apart already and checked that first. Exactly once it says unlocked and tried to reboot it stays in bootloop then when I force it into fastboot it shows as locked still.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Like audit said. It's probably the motherboard.
Sent from my Nexus 6 using Tapatalk
Related
Yesterday, I tried a oneclick root application but turns out only to complete the mission halfway. After pushing volume up and power button, I see
Lock state- unlocked, but Rom manager told me I'm not rooted
Today I found several thread, including the sticky thread on the top of the forum page, to root it the regular way. However, when I proceed to
fastboot oem unlock
nothing happens on the phone screen
Then I tried next step
"fastboot flash recovery 3024v3-i9023.img"
the picture of what happened is attached
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
still nothing on the phone screen
I try the recovery option on the phone, but few seconds later exclamtion sign and android robot show up. I'm able to get out of it and go into android system recovery, which only has 4 option
reboot system now
apply update from /sdcard
wipe data/factory reset
wipe cache partition
I tried both wipe option but they are both fruitless except wiping out all my data. They didn't change the lock/unlock property.
My i9023 is on 2.3.6, don't know if it matters.
So here is my situation, this is my first attempt to root the phone.
Guys help me please.
Did you get it rooted?
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1007782
Sent from my Nexus S 4G using xda premium
Look into my posts from my profile and look into my Topics Thread for rooting method... works with all Nexus S. Just follow the video.. download the file in description names NexusSRootNew ... just follow the video and Ull be fine. I used it and I'm doing well =]
Sent From In between Your Moms Boobies
Look at your screen shot. You left out the "flash" in the fastboot command.
irishrally said:
Look at your screen shot. You left out the "flash" in the fastboot command.
Click to expand...
Click to collapse
Lol good call.. missed that
Sent From In between Your Moms Boobies
irishrally said:
Look at your screen shot. You left out the "flash" in the fastboot command.
Click to expand...
Click to collapse
I'll try it later, thanks.
irishrally said:
Look at your screen shot. You left out the "flash" in the fastboot command.
Click to expand...
Click to collapse
Still fails. I get "wait for device" on the computer screen forever and get "fastboot status fail invalid command" on the bottom of the phone
mikel719 said:
Did you get it rooted?
Have you tried this?
h ttp://forum.xda-developers.com/showthread.php?t=1007782
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Tried and fail.
Did you install the pda drivers?
Sent from my Nexus S 4G using xda premium
YourMainDude said:
Look into my posts from my profile and look into my Topics Thread for rooting method... works with all Nexus S. Just follow the video.. download the file in description names NexusSRootNew ... just follow the video and Ull be fine. I used it and I'm doing well =]
Sent From In between Your Moms Boobies
Click to expand...
Click to collapse
It's oct 13th post right？Your youtube link fails. Several videos are alike, so I've got the idea of rooting but it simply fails after I input the commands, nothing happened on the phone screen and on computer it says wait for device
taylorzhang said:
It's oct 13th post right？Your youtube link fails. Several videos are alike, so I've got the idea of rooting but it simply fails after I input the commands, nothing happened on the phone screen and on computer it says wait for device
Click to expand...
Click to collapse
Go into my profile and look in my Topic Theads posted> Rooting Nexus S For Noobs... follow the steps and ill 100% guarantee you that Ull root it...
Sent From In between Your Moms Boobies
mikel719 said:
Did you install the pda drivers?
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
You reminds me, thanks. However, instead of nothing happens, it now shows failed. Screen capture is attached.
wait... u gotta update your drivers man.. ur computer needs yo recognize your phone lol
Sent From In between Your Moms Boobies
YourMainDude said:
wait... u gotta update your drivers man.. ur computer needs to recognize your phone lol
Sent From In between Your Moms Boobies
Click to expand...
Click to collapse
Sent From In between Your Moms Boobies
your youtube link direct me to wrong place. Actually I've seen video that use Nexusrootnew.zip maybe that's the one you want me to watchbut I the zip I downloaded is 4kb and obviously didn't work...
No matter how I try, it's always android 1.0 device...
Just in case we are missing the obvious, when you run your fastboot command, is your phone plugged into your computer via usb, and with your phone on the bootloader screen (power button + volume up when your phone is off)?
also, try:
fastboot devices
Guys, finally get it rooted and installed cm7.1. But the driver still seems to have some problem. It still reads android 1.0 in the device manager on the computer but the cwm is flashed in accidentally. Everything after is easy.
I will preface this question by saying that I'm not an expert in Android development, but this is also not my first time flashing a ROM and I am relatively comfortable with basic ADB commands and such. I try not to get involved in anything too complicated, but I like the control custom ROMs give.
I have an AT&T One X that had (has?) TWRP and ViperXL 3.2.5 on it. I wanted to try out the CM10 nightlies ROM. So I download the latest build and the gapps. Do a backup, do a full wipe, then flash the CM10 zip. In TWRP I get confirmation that it has flashed successfully. So I reboot, but I get nothing. A simple power on does nothing. Holding the power button flashes the back, home, settings buttons for ~10 seconds, then I get the white HTC screen with the red warning text, then nothing. Attempting to boot into recovery with the Power and Vol down button does the same.
What's going on here? I'm going to see if ADB will recognize the device, but I'm not sure what my steps should be to get a working phone back. Any help would be greatly appreciated. Thanks.
anothermiler said:
I will preface this question by saying that I'm not an expert in Android development, but this is also not my first time flashing a ROM and I am relatively comfortable with basic ADB commands and such. I try not to get involved in anything too complicated, but I like the control custom ROMs give.
I have an AT&T One X that had (has?) TWRP and ViperXL 3.2.5 on it. I wanted to try out the CM10 nightlies ROM. So I download the latest build and the gapps. Do a backup, do a full wipe, then flash the CM10 zip. In TWRP I get confirmation that it has flashed successfully. So I reboot, but I get nothing. A simple power on does nothing. Holding the power button flashes the back, home, settings buttons for ~10 seconds, then I get the white HTC screen with the red warning text, then nothing. Attempting to boot into recovery with the Power and Vol down button does the same.
What's going on here? I'm going to see if ADB will recognize the device, but I'm not sure what my steps should be to get a working phone back. Any help would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
After the back, home, settings buttons blink and the screen turns off, let go wait 3 seconds then press and hold power and volume down. It will go into bootloader. Also, make sure the phone is not plugged in while doing this.
Make sure you release power after the buttons flash, but hold vol down. That will get you into bootloader.
I suspect you've got the wrong kernel (Sense kernels don't work with asop). Are you s-off? If not, did you flash the CM10 boot.img in fastboot?
Thanks!
iElvis said:
Make sure you release power after the buttons flash, but hold vol down. That will get you into bootloader.
I suspect you've got the wrong kernel (Sense kernels don't work with asop). Are you s-off? If not, did you flash the CM10 boot.img in fastboot?
Click to expand...
Click to collapse
OK I can get into the bootloader. It looks like S-ON unfortunately, and no I didn't flash the CM10 boot.img. I assume that should take care of the kernel incompatibility?
yep
I think that's fixed
anothermiler said:
OK I can get into the bootloader. It looks like S-ON unfortunately, and no I didn't flash the CM10 boot.img. I assume that should take care of the kernel incompatibility?
Click to expand...
Click to collapse
Well I think I have everything fixed - I used a tool to flash the boot.img from fastboot and CM now seems to boot correctly. Thanks a lot for the help!
anothermiler said:
Well I think I have everything fixed - I used a tool to flash the boot.img from fastboot and CM now seems to boot correctly. Thanks a lot for the help!
Click to expand...
Click to collapse
Around here, we don't say thanks, pardner, we click the Thanks button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just a heads up, on Hboot 1.14 and S-On you'll have to flash a kernel separately each time
Sent from my One X using xda app-developers app
Desertman123 said:
Just a heads up, on Hboot 1.14 and S-On you'll have to flash a kernel separately each time
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Via fastboot no less. Key component.
ok where to start. i have a Galaxy s2 Boost mobile Phone. and well i installed Legacypatch cm-10-m7.1 as my new ROM it Was Working Fine intill well i was listening to music while on a run well umm it sorta fell out of my pocket and hit the ground then i found out it shut off i couldnt turn it back on thinking my phone was dead i ignored the problem intill i plug it in a Charger then i would just get the the Alien Tech Boot Section and keep resetting it self without letting me get to the CWM boot recovery so i thought it was a display or even a battery problem intill i put said battery in my other s2 and it worked fine then i plugged my phone into my cpu i Can Actullay get to the CWM that way so i wiped Data/Cache/Delvik/and Even System then tried to reinstall but it seems to Reboot in the middle of The Installtion. thank god i had redbean 7 final on my sd card to so i install that and it says it installed just reboot so i did It passes the Alien Part and goes to the redbean Screen Then Resets then again Keep Reseeting at the Alien Part So my Question is How Can i fix this? i only have those 2 rom's on my sd card And My CPU Cant Seem To find the so called Device to read. so im kinda stuck on trying to install a new Rom so what do i do?
Wrong forum guy
Sent from my GT-I9105P using xda app-developers app
MakoKuu said:
ok where to start. i have a Galaxy s2 Boost mobile Phone. and well i installed Legacypatch cm-10-m7.1 as my new ROM it Was Working Fine intill well i was listening to music while on a run well umm it sorta fell out of my pocket and hit the ground then i found out it shut off i couldnt turn it back on thinking my phone was dead i ignored the problem intill i plug it in a Charger then i would just get the the Alien Tech Boot Section and keep resetting it self without letting me get to the CWM boot recovery so i thought it was a display or even a battery problem intill i put said battery in my other s2 and it worked fine then i plugged my phone into my cpu i Can Actullay get to the CWM that way so i wiped Data/Cache/Delvik/and Even System then tried to reinstall but it seems to Reboot in the middle of The Installtion. thank god i had redbean 7 final on my sd card to so i install that and it says it installed just reboot so i did It passes the Alien Part and goes to the redbean Screen Then Resets then again Keep Reseeting at the Alien Part So my Question is How Can i fix this? i only have those 2 rom's on my sd card And My CPU Cant Seem To find the so called Device to read. so im kinda stuck on trying to install a new Rom so what do i do?
Click to expand...
Click to collapse
Not a big problem though.. You are in bootloop,in order to get out of it. If cwm is working then go there and wipe everything. After that go to DOWNLOAD Mode and flash your sock ROM of your phone. It wil surely work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ty
Ok umm 1. Sorry for posting in wrong Section please forgive me yeah my cwm works fine but how Exactly do i wiper everything you mean data/cache/delvik/system? also how do i get back into Download Mode with cwm i am aware it useally like hold volume up and power button but that also goes to cwm for me it doesnt do the download mode
safariking said:
Wrong forum guy
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
Try home+power+volume down
Sent from my GT-I9105P using xda app-developers app
safariking said:
Try home+power+volume down
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
no luck i tried both power+volup+home and power+voldown+home there both just going to CWM mode also do i have to delete CWM? before tring to go into Download mode? if so how?
MakoKuu said:
no luck i tried both power+volup+home and power+voldown+home there both just going to CWM mode also do i have to delete CWM? before tring to go into Download mode? if so how?
Click to expand...
Click to collapse
Not needed you can only delete cwm by flasing the stock recovery or a stock rom with odin!
Maybe you should go to the Galaxy S2 forums and ask it there!
I have a strange issue with my GS3 Verizon. I was running Clean ROM 4 and then recently wiped it and put Clean Rom 7.0 on it. Everything was working fine until last week it started just powering off randomly. So i'd pull the battery, reboot, and voila, it worked for a while until it randomly powered down again. Today i was thinking maybe it was Clean Rom causing this so I wiped it and installed Wicked Sensations. The problem only worsened. It started powering down like every minute. Now not eve a battery pull will get the phone back on.
Verizon is sending me a replacement, but i have to get this phone unrooted and back to stock so i don't have to pay a 300 dollar fee.
Can anyone PLEASE help me get this done? I have Samsung Drivers and Oden but doesn't recognize this blank screen device...
Thanks
Tommy
Voyaging said:
I have a strange issue with my GS3 Verizon. I was running Clean ROM 4 and then recently wiped it and put Clean Rom 7.0 on it. Everything was working fine until last week it started just powering off randomly. So i'd pull the battery, reboot, and voila, it worked for a while until it randomly powered down again. Today i was thinking maybe it was Clean Rom causing this so I wiped it and installed Wicked Sensations. The problem only worsened. It started powering down like every minute. Now not eve a battery pull will get the phone back on.
Verizon is sending me a replacement, but i have to get this phone unrooted and back to stock so i don't have to pay a 300 dollar fee.
Can anyone PLEASE help me get this done? I have Samsung Drivers and Oden but doesn't recognize this blank screen device...
Thanks
Tommy
Click to expand...
Click to collapse
Yes, flash this http://www.androidfilehost.com/?fid=23134718111254196 with Odin. That's it....if you can boot into recovery mode.
buhohitr said:
Yes, flash this http://www.androidfilehost.com/?fid=23134718111254196 with Odin. That's it....if you can boot into recovery mode.
Click to expand...
Click to collapse
How can I flash when the phone won't even power up? I can't get it to go into recovery or anything right now. Oden doesn't recognize anything either (i'm assuming because there's no power to the device?)
Voyaging said:
How can I flash when the phone won't even power up? I can't get it to go into recovery or anything right now. Oden doesn't recognize anything either (i'm assuming because there's no power to the device?)
Click to expand...
Click to collapse
So you can't turn on the phone even with the power plug in? is there any indication where the phone has power, like vibrating, flashing light, sound etc..? I don't think your phone is brick, most likely hardware issue since it's acting up before it die.
Exactly...there is no sign of power whatsoever. Verizon is sending a replacement but i'm worried they'll figure out it's rooted w a custom ROM flashed...so i was hoping to find a way to get unrooted and back to stock before it is sent back to them...
BUT I will say....when i plug the phone into my mac, i get the dialog box from VMWare fusion that asks do you want this device connected to Mac or Windows...but then Oden doesn't see it on Windows side and Android File Transfer won't notice it on mac side...but at least there's recognition that SOMETHING was just plugged in to the machine... hope?
Voyaging said:
BUT I will say....when i plug the phone into my mac, i get the dialog box from VMWare fusion that asks do you want this device connected to Mac or Windows...but then Oden doesn't see it on Windows side and Android File Transfer won't notice it on mac side...but at least there's recognition that SOMETHING was just plugged in to the machine... hope?
Click to expand...
Click to collapse
So pretend the screen is dead, boot it into download mode,(hold down the 3 buttons) wait 30 sec, then connect the phone to your pc see if your pc see the phone through Odin.(even though the screen is black).
Edit: I think you having hardware issue, but it's not hurt to try the hardbrick method just for the hell of it http://forum.xda-developers.com/showthread.php?t=2581166
buhohitr said:
So pretend the screen is dead, boot it into download mode,(hold down the 3 buttons) wait 30 sec, then connect the phone to your pc see if your pc see the phone through Odin.(even though the screen is black).
Click to expand...
Click to collapse
just tried that again...nothing.
Voyaging said:
just tried that again...nothing.
Click to expand...
Click to collapse
see my edited previous post.
buhohitr said:
see my edited previous post.
Click to expand...
Click to collapse
will do. here is the message i get when i plug the phone back into the micro USB end:
https://drive.google.com/file/d/0B9Gryr4xs3QId3VRZGdyUHJySnM/edit?usp=sharing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I'm trying to go back to stock rom with flashtool. Everything sets up and goes fine until it tries to switch phone to DL mode. IT fails 15 seconds in and then nothing happens.
Any ideas? Tried every usb port and every cable (3 of them) and it's the same thing every goddamn time.
Here is what I get.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ComradeZ said:
So I'm trying to go back to stock rom with flashtool. Everything sets up and goes fine until it tries to switch phone to DL mode. IT fails 15 seconds in and then nothing happens.
Any ideas? Tried every usb port and every cable (3 of them) and it's the same thing every goddamn time.
Here is what I get.
Click to expand...
Click to collapse
Are you not putting your device in download mode first? You must first place the phone into download mode yourself. Also make sure those USB ports are USB 2.0. USB 3.0 will cause that exact error your getting as well.
Sent from my iPhone using Tapatalk
Yup. USB 2.0. Yes, I put the phone in to DL mode before plugging it in. Sometimes it flashes almost all the way then gets as far as checking minios then blue factory reset screen and I'm stuck there due to flashtool failing to read the phone -again-.
ComradeZ said:
Yup. USB 2.0. Yes, I put the phone in to DL mode before plugging it in. Sometimes it flashes almost all the way then gets as far as checking minios then blue factory reset screen and I'm stuck there due to flashtool failing to read the phone -again-.
Click to expand...
Click to collapse
Remember it's almost always going to fail after 80%. That's supposed to happen as the reset is just rebooting. Since your getting mini os did you reflash choose board_dl?
Sent from my iPhone using Tapatalk
No, I used update dl, what flashtool was set at when I installed it.
Edit: And now I cannot get into DL mode anymore. Just a minios thing then a blue screen with the number 2 and 'Factory reset' on it.
Can't do anything otherwise. Stuck there.
GD, I hate this phone.
ComradeZ said:
No, I used update dl, what flashtool was set at when I installed it.
Edit: And now I cannot get into DL mode anymore. Just a minios thing then a blue screen with the number 2 and 'Factory reset' on it.
Can't do anything otherwise. Stuck there.
GD, I hate this phone.
Click to expand...
Click to collapse
You've tried pulling the battery, putting it back in and doing the button combination while plugging in the USB cable?
Sent from my iPhone using Tapatalk
hyelton said:
You've tried pulling the battery, putting it back in and doing the button combination while plugging in the USB cable?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Just did that 4 times and finally got it to DL mode. I set flashtool to board dl and am now reflashing.
Edit: Flashing complete, but now stuck at AT&T Mini OS 3.1 screen with a 'Auto touch test: Dont touch the screen' with an 'ok' button under it.
When will the madness end??
ComradeZ said:
Just did that 4 times and finally got it to DL mode. I set flashtool to board dl and am now reflashing.
Edit: Flashing complete, but now stuck at AT&T Mini OS 3.1 screen with a 'Auto touch test: Dont touch the screen' with an 'ok' button under it.
When will the madness end??
Click to expand...
Click to collapse
Not sure what you mean by madness? That screen is normal you use the vol up and down and power button to choose reset or reboot..
Sent from my iPhone using Tapatalk
hyelton said:
Not sure what you mean by madness? That screen is normal you use the vol up and down and power button to choose reset or reboot..
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Ok, got back to stock finally. Just rebooted the phone. Now to figure out a way to root it without bricking again.
ComradeZ said:
Ok, got back to stock finally. Just rebooted the phone. Now to figure out a way to root it without bricking again.
Click to expand...
Click to collapse
Glad you got it back to stock
Sent from my iPhone using Tapatalk