Hello I have a plum "brick", apparently nobody knows of this model.
The chipset is MTK8377, this if they have to know it. It turns out that there is no Rom for this tablet, at the time try with the MTKDroid Tools, install the driver adb of this tablet, connect and it does not recognize it.
But windows if it recognizes the device. Try with another phone and this one if recognizes.
That I can do in order that MTKDroid recognizes this tablet?
Anybody?? [emoji102]
My MMX A110Q has gone on a bootloop. (I guess its hard bricked). I do not have usb debugging on
I tried reinstalling stock rom with SPFlash Tool but didnt work as the phone does not stay connected to pc for more than 2 seconds. Installed the drivers in my PC successfully. Now what should i do in this case. I used this tool "Mt657xRepartition_EN.apk". Which lead to this issue. Please do reply.
Thanks
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
ron2yee said:
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
Click to expand...
Click to collapse
If you can see DA VCOM port when u connect the phone that means there is no need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Tyaginator said:
If you can see DA VCOM port when u connect the phone that means there is need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Click to expand...
Click to collapse
first of all thankx for your swift reply
and coming to the driver part.. i tried uninstalling the da drivers but it reverted to someother driver nit mtk preloader it had a different name.... whatsoever
and finally... my device is up and running its a miracle.... i kept it for a whole day and later i plugged in the charger and viola the phone was discharged and it started charging
also i have another problem with which i ll start a thread.. do keep an eye out please sir
thankx again [emoji4] [emoji4] [emoji4]
Sent from my 8x-1000i using Tapatalk
Hi.. My lenovo vibe A7020a48 is completely off when I trying to install the ROM from sp tool un-fortunately, I clicked on Format in SP Flash Tool
Now all is gone.... phone doesn't switch on....
and my USB drivers is also not supported by Windows... What can I do plz help me...
2 Options:
- Try to fix it with a different PC, one that can support the drivers.
- If you can't get your phone detected by the PC then take the phone to a service.
my micromax unite 2 was bricked i tried to unbrick using sp flash tool...but sp flash tool never detect my device.......i think that my usb debugging was turned off.......if it is due to off usb debugging.....then pls tell me how to enable it when device is bricked......and if its not due to turned off usb debugging.....then pls me solution for sp flash tool for not detecting my device...........my pc is running on windows 10.....pls help me regarding this.....please..........thank you