Hi.. My lenovo vibe A7020a48 is completely off when I trying to install the ROM from sp tool un-fortunately, I clicked on Format in SP Flash Tool
Now all is gone.... phone doesn't switch on....
and my USB drivers is also not supported by Windows... What can I do plz help me...
2 Options:
- Try to fix it with a different PC, one that can support the drivers.
- If you can't get your phone detected by the PC then take the phone to a service.
Related
Hello everyone..
i have problem with my tab.
my tab cannot detect by pc. i try with another pc/laptop and not detected too.
i already install usb driver, kies..
Odin also not detect my tab where my tab already in download mode.
any ideas???????? :crying::crying::crying::crying:
!!!
This problem happened to me also ! but even more if i connect to charger it won't charge but was solved via changing the cable try it !!!
try changing the cable like mythi from the Samsung care centre..
Even I had the same problem on my note 2.. But once I flashed a custom rom the problem just vanished...!
Try to install new system Device Drivers in pc
Sent from my GT-P3100 using Tapatalk 2
iszkandarir said:
Hello everyone..
i have problem with my tab.
my tab cannot detect by pc. i try with another pc/laptop and not detected too.
i already install usb driver, kies..
Odin also not detect my tab where my tab already in download mode.
any ideas???????? :crying::crying::crying::crying:
Click to expand...
Click to collapse
Which OS are you using ?
IF Windows Xp :-
U need to update your PC to ServicePack-3
IF Windows 7 :-
You need to update your PC to ServicePack-1
IF windows 8
Go to settings > change my PC setting > Devices
switch on the Download Over metered Connection.
IF Ubuntu
Just update it. OR try in-plug 2~3 times .
My MMX A110Q has gone on a bootloop. (I guess its hard bricked). I do not have usb debugging on
I tried reinstalling stock rom with SPFlash Tool but didnt work as the phone does not stay connected to pc for more than 2 seconds. Installed the drivers in my PC successfully. Now what should i do in this case. I used this tool "Mt657xRepartition_EN.apk". Which lead to this issue. Please do reply.
Thanks
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
ron2yee said:
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
Click to expand...
Click to collapse
If you can see DA VCOM port when u connect the phone that means there is no need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Tyaginator said:
If you can see DA VCOM port when u connect the phone that means there is need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Click to expand...
Click to collapse
first of all thankx for your swift reply
and coming to the driver part.. i tried uninstalling the da drivers but it reverted to someother driver nit mtk preloader it had a different name.... whatsoever
and finally... my device is up and running its a miracle.... i kept it for a whole day and later i plugged in the charger and viola the phone was discharged and it started charging
also i have another problem with which i ll start a thread.. do keep an eye out please sir
thankx again [emoji4] [emoji4] [emoji4]
Sent from my 8x-1000i using Tapatalk
my lenovo a5000 bricked after downgrade to stock kitkat s025 version using sp flashtool... now it cant be turn on... but my pc detect the phone after connecting via usb.. but when I press on button, nothing happen or vibrating... I try to flash back to newer version but sp flashtool doesnt detect the fon... help me!
Lenovo phones are damn fussy it requires to have the exact original FW for it to boot. Try to obtain the build details of the original FW and Google it.
Flash it back as usual and with the right FW it will power-up for sure....Good Luck !
If you flashed a wrong preloader your phone probably is irrecoverable
belalerebus said:
my lenovo a5000 bricked after downgrade to stock kitkat s025 version using sp flashtool... now it cant be turn on... but my pc detect the phone after connecting via usb.. but when I press on button, nothing happen or vibrating... I try to flash back to newer version but sp flashtool doesnt detect the fon... help me!
Click to expand...
Click to collapse
you need to open your phone..disconnect the battery and reconnect again..after that open your flashtool...open scatter file..Lenovo_A5000_S119_150820_8G_ROW_(by_xdafirmware.com)..then click start...connect usb to computer..press and hold volume down (phone) then connect your phone.. that's all........good luck
i experience something in my a5000 kikat it its detected but some errors appears in sp flash tool
i try using fastboot but it doesnt detect by the computer im so hopeless
maybe i flash wrong rom it keeps restarting in black screen
Im Having infocus turbo 5 plus mobile, and i tried to flash the device several times using sp flash tool without unlocking bootloader
and the problem now iam facing it is showing unknown device usb malfunctioned, i want to reinstall stock rom Please Help...