Hi,
I am trying to update the custom recovery on my HTC Desire S. However, my PC does not detect the phone when in hboot or fastboot mode (but it does when in recovery and when OS is loaded).
When I connect the phone to USB in hboot/fastboot mode, it shows "hboot usb plug" or "fastboot usb" for maybe 10 seconds, but then stops shoinw "USB", and windows shows message "USB device not recognized".
Any suggestions what I should do?
The PC is running Windows 10 Pro, the HTC drivers were installed with HTC Sync 3.3.63 and I installed Android SDK today.
I hope someone can help.
Related
I can't seem to get the fastboot usb drivers to install....i tried:
a) downloaded the asus android usb drivers but can't install manually because they won't do it on x64?!
b) installed asus pc sync (should install drivers also right?)
now i'm in fastboot usb download and when i connect the cable, it says USB device not recognized.
what can be done?
installed the SDK and now i see the device recognized in ADB, but i can't get it to be recognized in fastboot mode ???!!!!!! same error about unrecognized device...
// EDIT: WELL ****ING HELL, it was the USB port!!! I tried 3 of them (front panel) and same result
Switched to a backpanel port and it flashed TWRP straight away....
**** this, pls close thread.
So I was given another HTC sensation recently but this time it's bricked and I don't know how to fix it.
I have a working HTC sensation phone to test that the driver work on win 8.1
The problem
When turning on the phone it goes to a black screen with HTC logo in the middle and 4 small triangles with exclamation point in each corner, from here I have to take out the battery to turn off the phone.
Holding Power+volume down brings up this screen as well so I can't get into bootloader/hboot using pwr+volume down, same thing with plugging in phone to usb
What I've been told
phone is s-off (I assume this means it has a some sort of custom recovery)
bricked when pulling out cable during RUU while trying to return to stock
What I've done/know
windows 8.1
plugged to USB 2.0 port
USB device not recognised when plugging in phone, in device manager in Android HTC device properties
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Click to expand...
Click to collapse
disabled driver signing security
install Android Universal Naked Driver in Win8 test mode
install Minimal ADB and fastboot utility
adb devices doesn't list any device
other adb command give "error: device not found"
fastboot command produces "waiting for device"
same with fastboot getvar cid
Thank you for any assistance you can give
stillsober said:
So I was given another HTC sensation recently but this time it's bricked and I don't know how to fix it.
I have a working HTC sensation phone to test that the driver work on win 8.1
The problem
When turning on the phone it goes to a black screen with HTC logo in the middle and 4 small triangles with exclamation point in each corner, from here I have to take out the battery to turn off the phone.
Holding Power+volume down brings up this screen as well so I can't get into bootloader/hboot using pwr+volume down, same thing with plugging in phone to usb
What I've been told
phone is s-off (I assume this means it has a some sort of custom recovery)
bricked when pulling out cable during RUU while trying to return to stock
What I've done/know
windows 8.1
plugged to USB 2.0 port
USB device not recognised when plugging in phone, in device manager in Android HTC device properties
disabled driver signing security
install Android Universal Naked Driver in Win8 test mode
install Minimal ADB and fastboot utility
adb devices doesn't list any device
other adb command give "error: device not found"
fastboot command produces "waiting for device"
same with fastboot getvar cid
Thank you for any assistance you can give
Click to expand...
Click to collapse
you have to make the device being recognized from win 8.1
there a lot of guides here in xda on how to set up adb/fastboot on windows 8
then use again the ruu
I have 2 HTC sensations, one working one bricked.
the working one is recognised on the pc, fastboot etc working
the bricked one isn't
USB device not recognised when plugging in phone, in device manager in Android HTC device properties
Quote:
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Click to expand...
Click to collapse
[Q] HTC Desire S: Waiting for device and "device cannot start" while in Fastboot mode
So, Im trying to install a custom room on my HTC Desire S by folowing this tutorial but when I type in the commond promt "fastboot oem get_identifier_token" it just says waiting for device". On the phone it says FASTBOOT USB. On the device manager the device is recognized as My HTC and it says Cannot start device - error code 10. I installed the htc drivers, Android SDK, Google USB drivers, HTC Sync, Java Runtime Environment. ADB commands work while booted in Android. I tried two USB cables and two USB 2.0 ports and it still doesn't work. I searched forums for a solution with no luck. My HBOOT version is 2.00.0002 with S-ON, ROM version 2.10.401.8, Android 2.3.5, USB debugging enabled and fastboot desabled. I want to install a custom ROM because I want a new version of Android and the buttons sometimes work and sometimes not so I want to enable soft buttons but Android 2.3.5 doesn't support soft buttons. I'm doing this on a Windows 8.1 laptop. How can I fix this? .
Hey all.
I'm real sorry if this is out there somewhere--which I'm sure it is.
I had no luck using the search feature.
My PC (win 8.1) will not recognize the phone when connected in fastboot mode. I have the drivers installed and will work/connect when powered on. In fastboot it DOES show that the USB is obviously connected but, again, PC doesn't pick it up or says there was a "problem" with this device....
I am trying to the the TWRP recovery installed.
In addition, why is it when stock "recovery" is selected is shows the android with the statement "no command" and does nothing?!
Thanks for any and all help and/or links
Hi
I was trying to unlock my htc one e8 dual sim bootloader but i cannot get the device to be indentified as adb device. Here's what i did
1) Installed Android SDK platform tools and google usb driver and downloaded the fastboot binaries from htc dev
2)Installed htc sync manager for the drivers
3)Enabled USB debugging on phone
4)When the phone is turned on, it is shown in the adb devices list BUT as soon as i boot it in fastboot, it is not listed. I have tried installing the google usb driver , connecting it in Charging and Media Transfer mode but to no avail.
My laptop has only usb 3.0 ports
Kindly Help Me
Regards
Well... if you have the proper drivers installed, when you turn on the phone with the Vol - and PWR combination, you boot first on HBOOT, you must select Fastboot and then let the drivers get installed, thats the only way