Hi All
My Moto G only shows a Black Screen
I am unable to use the phone.
Normal use:
Turn it on
Moto Logo & Boot animation
Black Screen (with black light on)
Unable to use the phone, nothing but a black light
Trying to Factory Reset.
Turn on with Volume Down and Power Key
Scroll down to Factory and select with Volume Up
Phone reboots
All options in recovery does this, the phone reboots with Boot animation and black screen.
Any Suggestions on solving this?
Is fastboot working cz if u bricked it while installing some custom ROM recovery then try flashing the stock file (firmware and blah everything) but if u did it while doing something else like upgrading bootloader then w8 for some experienced user to help u here's the thread to help u using fastboot
http://forum.xda-developers.com/showthread.php?t=2542219
I restored myxt1032 when it got bricked becz of incompatible twrp that was on official site the hardest part of this method is finding the right tar.xml hope u get it recovered I'm writing again plz do this if u bricked it due to ROM kernal or recovery
Related
Installed kitkat+ rom from anerik, this resulted in a bootloop for my moto g, when it boots go directly to black screen and stays like that, can't even acces cwm recovery. tried the guide to restore stock firmware, also doesn't work, great! now I can't use my phone anymore.
When I try to flash stock firmware with guide, it says this:
Dont know what to do anymore really, can someone please help me?
now stuck at bootscreen....
I unlocked the bootloader of my moto g then flashed twrp and superSU and then before installing the cm12.1 i thought i should backup using twrp i backed up in an pen drive from otg but since then the phone is totally going insane!!
i can get into the fastboot mode but as soon as i click on the recovery teamwin logo appears (With a flickering screen) and then it restarts and shows warning that my bootloader is unlocked ...
keeps on repeating
i tried reflashing trwp on fastboot...
cwm...
twrp is not going any further than its logo screen...
cwm goes into recovery but nothing is working like factory reset and all...
when i click it nothing happens jst all options gets vanished
pls pls plsssss anyone help me :crying::crying::crying:
NikhilShirsat said:
I unlocked the bootloader of my moto g then flashed twrp and superSU and then before installing the cm12.1 i thought i should backup using twrp i backed up in an pen drive from otg but since then the phone is totally going insane!!
i can get into the fastboot mode but as soon as i click on the recovery teamwin logo appears (With a flickering screen) and then it restarts and shows warning that my bootloader is unlocked ...
keeps on repeating
i tried reflashing trwp on fastboot...
cwm...
twrp is not going any further than its logo screen...
cwm goes into recovery but nothing is working like factory reset and all...
when i click it nothing happens jst all options gets vanished
pls pls plsssss anyone help me :crying::crying::crying:
Click to expand...
Click to collapse
Hello.
Thank you for using XDA Assist.
Here is your device's main forum area:
http://forum.xda-developers.com/moto-g
Your questions should be posted here:
http://forum.xda-developers.com/moto-g/help
Remember to always search first.
Good luck!
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.
I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.
i tried to install custom recovery on my device
segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS
i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz
NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me
pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!
I just flashed my blackview bv5500, with the stock rom using mediatek sp flash tool, before flash I made "format whole flash" (probably this was the mistake)
After this I flashed from download tab and got ok message at the end. But when I try to switch on the device the screen switches on because I see the light, but it is stuck on black and no any logo.
Is there any solution for this?
Thank you for your help I promise to help back when I can
Nice! I solved with different rom for brick problem, but original problem still there, device always boot in recovery mode and no any way to boot on android
Any help on this problem? My device always boot in recovery
Same problem, what ROM did you use to fix it and get your screen back ?