May have bricked need help - Galaxy S6 Q&A, Help & Troubleshooting

Hello
I was on xtrestolite and arter kernel, i wanted to switch to vindicator kernel so i used his arter kernel unistaller then flashed the kerlen using philZ, but now it doesnt go past samsung galaxy s6 screen, powered by android bit. I can go on download mode I can get on download mode but when I'm t rying to flash stock remains on Downloading... do not turn off target.
Any ideas?
Its on this on odin
<OSM> G920FXXU2COH2_G920FBTU2COH3_G920FXXU2COH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!

Related

[Q] brick problem on Note

Hi. I tryed to instal N7000 with Jellybean 4.1.1 based AOKP 4 Firmware. I folowed the instructions and had made a factory reset. The problem ist that the phone starts only to start screen with Samsung Galaxy Note and the yelow triangle. Pleas help and sorry for my bad english.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
velikib said:
Hi. I tryed to instal N7000 with Jellybean 4.1.1 based AOKP 4 Firmware. I folowed the instructions and had made a factory reset. The problem ist that the phone starts only to start screen with Samsung Galaxy Note and the yelow triangle. Pleas help and sorry for my bad english.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
Click to expand...
Click to collapse
Your asking a question, so use the damn Q&A forum. Or read this

Samsung Note (GT-N8000) broken?

When I turn on my tablet, block on "Samsung".
I tried to flash the ROM's stock 4.1.2, 4.1.2 rom Tim and the stock rom 4.4.2
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> tz.img
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
Click to expand...
Click to collapse
Shortly after, goes in error
Then I tried to install the CWM
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
What can be the reason?
Try a different download.
http://forum.xda-developers.com/showthread.php?t=2699840
JJEgan said:
Try a different download.
http://forum.xda-developers.com/showthread.php?t=2699840
Click to expand...
Click to collapse
Hi
how do I move the post in the correct section?
I tried to download 3 files from SamMobile. And all give me the same error.
Android 4.4.2 Stock
N8000XXUDOF1_N8000ITVDOF1_ITV
Android 4.1.2 Stock
N8000XXCMJ2_N8000ITVCMJ3_ITV
Android 4.1.2 TIM
N8000XXCMG3_N8000TIMCMG2_TIM
How can I solve this problem?

stuck in boot recovery

i have a s7 sm-g930vl and got odin to flash it to sm-g930v and it failed with a auth fail and now all i get to a boot recovery loop and download mode can someone help the fix me phone
Someone here had the same problem but fixed it just flashing the 4 ROM sections
https://forum.xda-developers.com/galaxy-s7/help/screwed-sm-g930vl-please-help-t3416539
Check "Repartition" in ODIN settings if you're changing CSC
Use ODIN 3.12.3 or newer
*Detection* said:
Someone here had the same problem but fixed it just flashing the 4 ROM sections
https://forum.xda-developers.com/galaxy-s7/help/screwed-sm-g930vl-please-help-t3416539
Check "Repartition" in ODIN settings if you're changing CSC
Use ODIN 3.12.3 or newer
Click to expand...
Click to collapse
it still failed to flash
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> cache.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Wjb89 said:
it still failed to flash
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> cache.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try flashing without the BL section of the ROM
nop
*Detection* said:
Try flashing without the BL section of the ROM
Click to expand...
Click to collapse
fail
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> persist.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
G930U firmware works on the G930V and VL according to XDA
http://forum.xda-developers.com/showpost.php?p=71418277&postcount=3
Try the G930U firmware

Changed SM-G9550 from HK to open China with Tomato Rom

I'd unlocked my Bootloader, flashed TWRP and also Tomato Rom. Now I want to go back to the TGY Rom and have this effect in Odin :
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1205)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> abl.elf
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to flash the correct Boot & Recovery from the firmware.mobi (chainfire) , Samsung info shows TGY everywhere, but no complete flash possible. How to solve this issue?

Complete Dead? N915F

I have accidentally flash my n915f to firmware from n915fp. And my phone cant boot, stuck at bootloop. I have tried to reflash to latest 6.0.1 firmware for n195f but no luck. I got odin error. Now suddenly my phone completely dead. No sign of life anymore. Did my phone already hardbricked? Is there a way to fix it? Its my first samsung phone.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3479 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)

Categories

Resources