Hi,
I have visited to Samsung Service Center to upgrade from Froyo to Gingerbird, But they failed. Even when I upgraded thorugh Kies and with ODIN, The uprading process has been done successfully, but porblem to reboot just after the upgrading.
Now again i have to degrade the version and my mobile now Froyo "I9003DDKB2_ODDKA6_DDKA5".
What Can i do for upgrading...Please help.
Thanks...
to gingerbread just flash
1.Flash full XXKPE(PDA,PHONE,BOOTLOADER,CSC)+pit
2.Flash full XXKPE
and for stable firmware GB
3.Flash DDLF2
Samsung Galaxy I9003 upgrade prob:Froyo to Gingerbird by ODIN and Service Center.
MR.Volkf said:
to gingerbread just flash
1.Flash full XXKPE(PDA,PHONE,BOOTLOADER,CSC)+pit
2.Flash full XXKPE
and for stable firmware GB
3.Flash DDLF2
Click to expand...
Click to collapse
Thanks for your feedback...
I tired to search the following task list but not able to found.:crying:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar
can anybody provide the downable link....
Thanks ......
singh29 said:
Thanks for your feedback...
I tired to search the following task list but not able to found.:crying:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar
can anybody provide the downable link....
Thanks ......
Click to expand...
Click to collapse
You can find it all here bro.. http://forum.xda-developers.com/showthread.php?t=1004647
Samsung Galaxy I9003 upgrade prob:Froyo to Gingerbird by ODIN and Service Center.
malungkot said:
You can find it all here bro.. http://forum.xda-developers.com/showthread.php?t=1004647
Click to expand...
Click to collapse
Can I flesh with the "XKPQ (4 files + pit)" files instead of "XXKPE (4 files + pit)" files ?
singh29 said:
Can I flesh with the "XKPQ (4 files + pit)" files instead of "XXKPE (4 files + pit)" files ?
Click to expand...
Click to collapse
Yes, best to skip the bootloader(APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar)..flash PIT + PDA + PHONE +CSC
Samsung Galaxy I9003 upgrade prob:Froyo to Gingerbird by ODIN and Service Center.
wee2wee said:
Yes, best to skip the bootloader(APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar)..flash PIT + PDA + PHONE +CSC
Click to expand...
Click to collapse
Thanks for your replay...
Again Unable to Flesh.......
I have tried with the both XXKPE and XXKPQ files for flesh but unable to flesh. The problem is only coming for booting after fleshed. I have also tried with the "GT-I9003_PDA-XXKPE-fixed (2).tar" but again failed. Used Odin is "Odin3_v3.04". I have done "Restore Factory" internal SD card and then tried but unable to flesh.
After that i have to back with the "I9003DDKB2_ODDKA6_DDKA5.rar" Version.
Used the following files.
PI: latona_20110114.pit
PDA: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
PHONE: MODEM_I9003XXKPE_REV_00_CL1041909.tar
BOOTLOADER: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CSC: GT-I9003-CSC-MULTI-OXAKPE.tar
AND
latona_20110114.pit
APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
CODE_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
GT-I9003-CSC-SERKPQ.tar.md5
MODEM_I9003XXKPQ_REV_00_CL1076353.tar.md5
I don't know what the problem is? :crying::crying::crying:
singh29 said:
Thanks for your replay...
Again Unable to Flesh.......
I have tried with the both XXKPE and XXKPQ files for flesh but unable to flesh. The problem is only coming for booting after fleshed. I have also tried with the "GT-I9003_PDA-XXKPE-fixed (2).tar" but again failed. Used Odin is "Odin3_v3.04". I have done "Restore Factory" internal SD card and then tried but unable to flesh.
After that i have to back with the "I9003DDKB2_ODDKA6_DDKA5.rar" Version.
Used the following files.
PI: latona_20110114.pit
PDA: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
PHONE: MODEM_I9003XXKPE_REV_00_CL1041909.tar
BOOTLOADER: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CSC: GT-I9003-CSC-MULTI-OXAKPE.tar
AND
latona_20110114.pit
APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
CODE_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
GT-I9003-CSC-SERKPQ.tar.md5
MODEM_I9003XXKPQ_REV_00_CL1076353.tar.md5
I don't know what the problem is? :crying::crying::crying:
Click to expand...
Click to collapse
Do you mean the phone does not boot up(stuck at Samsung logo)after flashed XXKPE or XXKPQ and you can boot up after flashed back to Froyo "I9003DDKB2_ODDKA6_DDKA5..that's strange
singh29 said:
Thanks for your replay...
Again Unable to Flesh.......
I have tried with the both XXKPE and XXKPQ files for flesh but unable to flesh. The problem is only coming for booting after fleshed. I have also tried with the "GT-I9003_PDA-XXKPE-fixed (2).tar" but again failed. Used Odin is "Odin3_v3.04". I have done "Restore Factory" internal SD card and then tried but unable to flesh.
After that i have to back with the "I9003DDKB2_ODDKA6_DDKA5.rar" Version.
Used the following files.
PI: latona_20110114.pit
PDA: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
PHONE: MODEM_I9003XXKPE_REV_00_CL1041909.tar
BOOTLOADER: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CSC: GT-I9003-CSC-MULTI-OXAKPE.tar
AND
latona_20110114.pit
APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
CODE_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
GT-I9003-CSC-SERKPQ.tar.md5
MODEM_I9003XXKPQ_REV_00_CL1076353.tar.md5
I don't know what the problem is? :crying::crying::crying:
Click to expand...
Click to collapse
dnt panic...download XXKPE package, inside that package itself u will find Latona.pit file......now put ur mobile in download mode,connect to odin,flash latona.pit...then remove usb cable nd battery ..again put ur phone in download mode,connect to odin, then flash all 4 files in xxkpe,....that's it..wait for 15 min..u phone will boot up.
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
frst flash latona.pit file alone separately...then u will get a black screen..after that again enter download mode and then connect to odin and flash remaining 4 files..
devasenan200 said:
dnt panic...download XXKPE package, inside that package itself u will find Latona.pit file......now put ur mobile in download mode,connect to odin,flash latona.pit...then remove usb cable nd battery ..again put ur phone in download mode,connect to odin, then flash all 4 files in xxkpe,....that's it..wait for 15 min..u phone will boot up.
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
frst flash latona.pit file alone separately...then u will get a black screen..after that again enter download mode and then connect to odin and flash remaining 4 files..
Click to expand...
Click to collapse
Thanks for your feedback...
Again, Fail to upgrade. As per your comment, I have stand for 30 min after fleshed. Please find the below process has been done with XXKPE package:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> normalboot.img
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> system.rfs
<ID:0/004> cache.rfs
<ID:0/004> userdata.rfs
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When above process has not been done again i have to back with the Froyo Version. Please find the below process has been done with Froyo "I9003DDKB2_ODDKA6_DDKA5.rar" package:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> normalboot.img
<ID:0/004> Sbl.bin
<ID:0/004> system.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
Thanks......
singh29 said:
Thanks for your feedback...
Again, Fail to upgrade. As per your comment, I have stand for 30 min after fleshed. Please find the below process has been done with XXKPE package:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> normalboot.img
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> system.rfs
<ID:0/004> cache.rfs
<ID:0/004> userdata.rfs
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When above process has not been done again i have to back with the Froyo Version. Please find the below process has been done with Froyo "I9003DDKB2_ODDKA6_DDKA5.rar" package:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> normalboot.img
<ID:0/004> Sbl.bin
<ID:0/004> system.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed
after flashing xxkpe, what Is happening?..did you flash latona file separately first?
Click to expand...
Click to collapse
devasenan200 said:
singh29 said:
Thanks for your feedback...
Again, Fail to upgrade. As per your comment, I have stand for 30 min after fleshed. Please find the below process has been done with XXKPE package:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> normalboot.img
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> system.rfs
<ID:0/004> cache.rfs
<ID:0/004> userdata.rfs
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When above process has not been done again i have to back with the Froyo Version. Please find the below process has been done with Froyo "I9003DDKB2_ODDKA6_DDKA5.rar" package:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> normalboot.img
<ID:0/004> Sbl.bin
<ID:0/004> system.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed
after flashing xxkpe, what Is happening?..did you flash latona file separately first?
Click to expand...
Click to collapse
Yes.... I have tested on both condition with use "Restore factory". Previous i did with the package. but result : Negative
Again I have fleshed separately (latona) and other 4 files.
After 30 min when found result as a negative; I have to flesh with Froyo Version "I9003DDKB2_ODDKA6_DDKA5.rar" and It working fine. No problem found for rebooting.
Click to expand...
Click to collapse
singh29 said:
devasenan200 said:
Yes.... I have tested on both condition with use "Restore factory". Previous i did with the package. but result : Negative
Again I have fleshed separately (latona) and other 4 files.
After 30 min when found result as a negative; I have to flesh with Froyo Version "I9003DDKB2_ODDKA6_DDKA5.rar" and It working fine. No problem found for rebooting.
Click to expand...
Click to collapse
I think prob is only rebooting.
Click to expand...
Click to collapse
any update regarding prob for upgrading froyo to gingerbird or upper version...
singh29 said:
singh29 said:
I think prob is only rebooting.
Click to expand...
Click to collapse
any update regarding prob for upgrading froyo to gingerbird or upper version...
Click to expand...
Click to collapse
Successfully Root the galaxy I9003 but unable to upgrade from froyo to upper version.
singh29 said:
singh29 said:
any update regarding prob for upgrading froyo to gingerbird or upper version...
Click to expand...
Click to collapse
I have successfully Rooted the galaxy I9003 but unable to upgrade from froyo to upper version.
I have tried with the both XXKPE and XXKPQ files for flesh but result is negative. The problem is only coming for booting after fleshed.
Pelase help..
Should i visit to service center for upgrading. ??
Click to expand...
Click to collapse
Hi guys, don't use Odin 3.04
It cause problems, use Odin 1.85
Sent from my C2105 using Tapatalk
..
Could u please put the files needed for flashing the jpkp5 rom?(pit,bootloader,etc)
as chongns said use odin 1.85 or 1.85
remember to check re-partition when flashing latona.pit and uncheck it when flashing the rest of the files
when flashing remember to flash two times the same passage some phones dosen't update correctly with only one flash
Hello!
I recently got a S4 mini and decided to root so I could have an extended memory using link2sd! Everything was perfect but later the KITKAT update started to roll out, so i decided to go back to stock so I could update my phone... I downloaded a stock Rom from Sammobile and used odin to flash it... It keeps saying that EXT4 failed! So now its stuck in download mode! When I try to root just to see if it fixes anything it makes the Samsung boot sound and then the screen goes black.. I try reflashing the 4.4.2 Rom but it keeps failing!
Here is what ODIN3 3.0.7 says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNEA_I9195VFRCNE4_I9195XXUCNEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Please tell me a fix because its stuck in firmware upgrade fail screen!
Also Kies wont detect it and i have installed USB drivers for my phone!
Also please don't say that I shouldn't have rooted and stuff because it is too late for that.
BTW I am going to thank (like) anyone who fixes this!
Yiannis1 said:
Hello!
I recently got a S4 mini and decided to root so I could have an extended memory using link2sd! Everything was perfect but later the KITKAT update started to roll out, so i decided to go back to stock so I could update my phone... I downloaded a stock Rom from Sammobile and used odin to flash it... It keeps saying that EXT4 failed! So now its stuck in download mode! When I try to root just to see if it fixes anything it makes the Samsung boot sound and then the screen goes black.. I try reflashing the 4.4.2 Rom but it keeps failing!
Here is what ODIN3 3.0.7 says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNEA_I9195VFRCNE4_I9195XXUCNEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Please tell me a fix because its stuck in firmware upgrade fail screen!
Also Kies wont detect it and i have installed USB drivers for my phone!
Also please don't say that I shouldn't have rooted and stuff because it is too late for that.
BTW I am going to thank (like) anyone who fixes this!
Click to expand...
Click to collapse
Try a different ROM. I had the same problem with the NEA one but the NE6 loads OK.
NEED URGENT HELP (S3 mini GT-I8190 Mid variant IRAQ)
This is the log the time I flash it with odin and it was success but its still on bootloop,, any solution for this guys???
<OSM> I8190XXAMA3_I8190OJVAMA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> STE_boot1.img
<ID:0/004> STE_boot2.img
<ID:0/004> modem.bin
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Hello
I was on xtrestolite and arter kernel, i wanted to switch to vindicator kernel so i used his arter kernel unistaller then flashed the kerlen using philZ, but now it doesnt go past samsung galaxy s6 screen, powered by android bit. I can go on download mode I can get on download mode but when I'm t rying to flash stock remains on Downloading... do not turn off target.
Any ideas?
Its on this on odin
<OSM> G920FXXU2COH2_G920FBTU2COH3_G920FXXU2COH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
helo..
my tablet gt-p5110
cannot enter recovery (pwr+vol+) and download mode (pwr+vol-), but just stuck in "firmware upgrade encountered an issue, please recovery mode in kies & try again",but the device still connect and sync to odin.
I was using a pit file but when started there is an info from Odin that ''pit partition does not exist''.
when flashing use odin 3.07 with stock rom from samsung-updates.com / or cwm/twrp/chillpilz recovery for my device the flasher complete and pass..but after auto rebooting just got black screen,and if press power got back to firmware upgrade encontered an issue.
here the odin log :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XXCME2_P3100OLBCME2_P3100DXDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
tired use another odin version just get flashing FAIL and other gt-p3100 still stuck firmware issue
anyone can give me another solusion ?
i aready read all thread in forum xda about flashing/brick/recovery...but still no luck