Database Info

[JB][4.1.2] CyanogenMod 10 for S6310

IMPORTANT
I do not have a successful boot yet. Stay tuned for more updates!
Found a solid 4.1.2 base, will try porting it to CM10
Installation
Install TWRP
Wipe Data, System, Cache and Dalvik
Install CM zip
Install GApps
Reboot
XDA:DevDB Information
CM10 for S6310, ROM for the Samsung Galaxy Young S6310
Contributors
lesleyxxx15, PsychoGame
Source Code: https://github.com/CyanogenMod-S6310
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: None
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-01-21
Last Updated 2016-02-12

WoW it's nice to see that there is still developments for this phone...
Good work bro, I'm ready to test it on my S6312
Sent from my SM-G361H using Tapatalk

Mr said:
WoW it's nice to see that there is still developments for this phone...
Good work bro, I'm ready to test it on my S6312
Sent from my SM-G361H using Tapatalk
Click to expand...
Click to collapse
Seriously. It's meant for the single-sim variant of the galaxy young......It can be used by S6310/S6310L/S6310N(though nfc will not work). It may work but it's either only one sim card being read or no sim at all
Sent from my GT-S6310 using Tapatalk

jacobpayag said:
Seriously. It's meant for the single-sim variant of the galaxy young......It can be used by S6310/S6310L/S6310N(though nfc will not work). It may work but it's either only one sim card being read or no sim at all
Sent from my GT-S6310 using Tapatalk
Click to expand...
Click to collapse
Could try making a build for dual sim. But first a boot.

Speaking how's that boot doing
Sent from my GT-S6310 using Tapatalk

jacobpayag said:
Speaking how's that boot doing
Sent from my GT-S6310 using Tapatalk
Click to expand...
Click to collapse
Im working on it. I need to do some work on the init files.

wher is the rom ???
wher is the rom ???

zinou zizou said:
wher is the rom ???
Click to expand...
Click to collapse
It's in development, I just created a development thread already to let people know I'm working on it.

Any updates?

Raiyan862 said:
Any updates?
Click to expand...
Click to collapse
Well I have been trying to get all 3 displays working of my pc (grrrr Xorg) and I have done some work on rebuilding the source tree because it corrupted (just like my boot drive did and had to order new drive, reinstall Linux, etc.). I'm doing my best to get back to work ASAP.

Good luck , lesleyxxx15

something wrong
lesleyxxx15 said:
Well I have been trying to get all 3 displays working of my pc (grrrr Xorg) and I have done some work on rebuilding the source tree because it corrupted (just like my boot drive did and had to order new drive, reinstall Linux, etc.). I'm doing my best to get back to work ASAP.
Click to expand...
Click to collapse
i look in your device tree it seems like missing something
you should have a royss.mk

simokb1996 said:
i look in your device tree it seems like missing something
you should have a royss.mk
Click to expand...
Click to collapse
It's the default tree pulled from CAF.

Any updates ?

victoriordachi said:
Any updates ?
Click to expand...
Click to collapse
Nope, and there won't be many as I have to do work for school.

Bootloop
I now have proper display output but I have a bootloop, any help is appreciated.
Logcat
After the last line where it enters the loop adb doesn't work.
I guess it's an init problem..

lesleyxxx15 said:
I now have proper display output but I have a bootloop, any help is appreciated.
Logcat
After the last line where it enters the loop adb doesn't work.
I guess it's an init problem..
Click to expand...
Click to collapse
Definately an init file. Things were failing to start. Any how again, I don't have a laptop with me and I can't point out exactly what
Sent from my SM-T210 using Tapatalk

jacobpayag said:
Definately an init file. Things were failing to start. Any how again, I don't have a laptop with me and I can't point out exactly what
Sent from my SM-T210 using Tapatalk
Click to expand...
Click to collapse
Looks like it's the same problem NV-Dev had..
Maybe if I build for 10.1 it will work?

In my compilations he came to bootanimation and stayed there, and the ADB worked, but died of nowhere.

NV-Dev said:
In my compilations he came to bootanimation and stayed there, and the ADB worked, but died of nowhere.
Click to expand...
Click to collapse
Thats exactly what I have.
Edit:
Syncing 10.1 source

[MOD][7.1][CM14.1]Partial Screenshot [G800F/M/Y]

Hey everyone. Here is a mod to take partials screenshots on our S5 Mini!
This mod works only if you have the first build of CyanogenMod 14.1 by @hennymcc (Test-Build 07/11/2016) (you can found it HERE )
Credits goes to @Maxr1998 for helping me to do this.
/!\ Neither Maxr1998 and I are responsible if you do something wrong /!\
Installation:
1. Download the zip file(s) below
2. Reboot into your recovery
3. Flash the zip file
4. Reboot your device, and you're done!
Downloads:
[REMOVED UNTIL I FOUND A FIX]
How it works:
Video:
On my Galaxy S5 mini:
Explanations:
1. Press the screenshot buttons (Power + Volume Down)
2. Draw a rectangle with your finger
UPDATE (11/22/16)​
- Added a new video in the thread, to show you that the mod is really working, so please, if you're saying it's not working, first, be sure to read the entire thread, then, if it really doesn't work, explain what you did.
- Updated scripts in .zip files.​
Have a nice day!

Anyone have this working? In the application "system interface" has failed.. and black screen. (Google translation)

Oleggluk said:
Anyone have this working? In the application "system interface" has failed.. and black screen. (Google translation)
Click to expand...
Click to collapse
For me too
Sent from my SM-G800F using Tapatalk

Do a full backup! And best of all it failed to install. Lost all data(( . It's not working., Partial Screenshot Remover (Original SystemUI) is not working.the new firmware does not help., only fully formatirati and firmware. (Google translation)

UPDATE (11/22/16)​
- Added a new video in the thread, to show you that the mod is really working, so please, if you're saying it's not working, first, be sure to read the entire thread, then, if it really doesn't work, explain what you did.
- Updated scripts in .zip files.​
The video:
Have a nice day!

I did what it says in the instructions, nothing else
Sent from my SM-G800F using Tapatalk

nico_vo said:
I did what it says in the instructions, nothing else
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Give more informations... What's your rom, etc... And send logcat too please.

EvoWizz said:
Give more informations... What's your rom, etc... And send logcat too please.
Click to expand...
Click to collapse
My ROM is cm14.1 and I dont have a log to send ?
Sent from my SM-G800F using Tapatalk

nico_vo said:
My ROM is cm14.1 and I dont have a log to send ?
Click to expand...
Click to collapse
Then I can't help, sorry..

Hhjo

I flashed the provided zip file (I have CM14 and Gapps) but it killed my System completely. Black screen and System UI crashed. Flashing the Remover zip didn't change anything.

Zocker1304 said:
I flashed the provided zip file (I have CM14 and Gapps) but it killed my System completely. Black screen and System UI crashed. Flashing the Remover zip didn't change anything.
Click to expand...
Click to collapse
Hello, can you provide more informations please (like what's your device model, your ROM, and if possible, a logcat)

EvoWizz said:
Hello, can you provide more informations please (like what's your device model, your ROM, and if possible, a logcat)
Click to expand...
Click to collapse
Sorry, but I have no idea about a logcat.
I have a SM-G800F with CM 14 by hennymcc.
I only flashed gapps with the firmware. No other tweaks.
Edit: The flashing process itself was without errors.

Zocker1304 said:
Sorry, but I have no idea about a logcat.
I have a SM-G800F with CM 14 by hennymcc.
I only flashed gapps with the firmware. No other tweaks.
Edit: The flashing process itself was without errors.
Click to expand...
Click to collapse
I'm gonna search for a fix, you're not the first one to report a problem :/

EvoWizz said:
I'm gonna search for a fix, you're not the first one to report a problem :/
Click to expand...
Click to collapse
Great work anyway, thanks for trying.

Zocker1304 said:
Great work anyway, thanks for trying.
Click to expand...
Click to collapse
Thanks Could we talk via MP please ?

EvoWizz said:
Thanks Could we talk via MP please ?
Click to expand...
Click to collapse
Whatever mp is, just write me
But tomorrow. Going to sleep now.

[ROM][WIP] LineageOS 14.1 visi0nary's builds

Hey,
since @HridayHS seems to have stopped working on LOS 14.1 I decided to continue and finish his work. Unfortunately I don't own the device so I am very dependent on you guys as testers at this point.
Below is a first build linked that was just freshly built but I have no idea if it even boots (it should though). Please test it and report back. Thank you!
What's working:
-> nothing
What's not working:
-> The builds do *NOT* boot yet! Thus I removed the download links for now to avoid confusion.
Downloads:
MOD EDIT: Removed link to broken, untested builds.
The first boot will take quite a long time as I disabled compile-time optimizations for now. I will include them in later stages of development again but first I wanna have a working image
If it boots, great! Test everything and let me know what works and what does not. If it does *not* boot please post a last_kmsg and logcat if possible
Sources:
https://github.com/visi0nary/android_kernel_xiaomi_msm8937
https://github.com/visi0nary/android_device_xiaomi_land
https://github.com/visi0nary/android_vendor_xiaomi_land
Thanks to:
-> @TheStrix
for kenzo base
-> @zwliew
-> @HridayHS
-> @fedosis
-> @billchen1977 (for the camera patches)
Supporters:
These awesome people help to keep the project alive! Thank you!
-> @rionline twice! dawg!
-> @Chefov01
-> @shankar_vl
-> @fedosis
-> @Bonoboo

one moar

Yipeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee, thanks! Will test and let you know what's working ?

BlueFlame4 said:
As you might have guessed I don't own a Redmi 3s at the moment. Even though I would like to push LOS 14.1 for this device I cannot afford one at the moment. If you want to support the development, feel free to donate some bucks so I can buy a device. Thank you!
Currently collected funds:
I will update this counter daily.
10€/110€
Click to expand...
Click to collapse
pls give the account info wherein to deposit the donation. if you have PayPal account, give the link to the account.

Will test this.
Fast downloads . BTW, why is the zip file only 152MB? That seems way too small for an arm64.. Correct me if I'm wrong.

shankar_vl said:
pls give the account info wherein to deposit the donation. if you have PayPal account, give the link to the account.
Click to expand...
Click to collapse
Have a look to the left https://forum.xda-developers.com/donatetome.php?u=3784300 Thanks for wanting to donate
nichcream said:
Will test this.
Fast downloads . BTW, why is the zip file only 152MB? That seems way too small for an arm64.. Correct me if I'm wrong.
Click to expand...
Click to collapse
I was wondering about the same but I guess it's due to missing optimizations (dex2oat will run on first bootup and not at compile time).
Edit: You might still be right. Something's wrong with the vendor folder... Let's see...

Hi your rom`s doing bootloops. It doesn´t reach the los-logo.
I combined with every other N-Kernel for our device: stuck @ mi-logo.

Voodoojonny said:
Hi your rom`s doing bootloops. It doesn´t reach the los-logo.
I combined with every other N-Kernel for our device: stuck @ mi-logo.
Click to expand...
Click to collapse
Same here

Every feedback welcome here those who flashed it

Not booting up
And in my case stuck at mi logo
I think i used dualboot patcher thats why
I will test again without dualboot and tell
And to every tester i suggest to make full emmc dump of yr device for safety in case any hardbrick occurs

thanks for informing. will test the next build.

Now I combined your kernel with rr5.8.3, rr5.8.2 and Los14.1 still reboot every 5 sec.
It seems to be something wrong with your boot.img

how to make emmc dump?
addy692 said:
Not booting up
And in my case stuck at mi logo
I think i used dualboot patcher thats why
I will test again without dualboot and tell
And to every tester i suggest to make full emmc dump of yr device for safety in case any hardbrick occurs
Click to expand...
Click to collapse

What is this? https://visi0nary.de/builds/full/recovery-lineageos-unofficial-d855-20170627.img

Okay, thanks! I think I already found the problem. Running a new build now
harsh-sh!t said:
What is this? https://visi0nary.de/builds/full/recovery-lineageos-unofficial-d855-20170627.img
Click to expand...
Click to collapse
Check: https://visi0nary.de/builds/device-list.txt
It a recovery for the LG G3 - nothing for you guys, sorry

I´m using dualboot too... takes to much time backing up everything everytime...
But I don´t think dualboot is the reason. Every other rom boots fine with dualboot.

BlueFlame4 said:
Okay, thanks! I think I already found the problem. Running a new build now
Click to expand...
Click to collapse
Great

BlueFlame4 said:
Okay, thanks! I think I already found the problem. Running a new build now
Check: https://visi0nary.de/builds/device-list.txt
It a recovery for the LG G3 - nothing for you guys, sorry
Click to expand...
Click to collapse
I know it's not for our device but which recovery is it?

harsh-sh!t said:
I know it's not for our device but which recovery is it?
Click to expand...
Click to collapse
Los recovery, it's like stock recovery
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
Hemansh said:
Same here
Click to expand...
Click to collapse
Did you also try it with dual boot?

austinpinto said:
how to make emmc dump?
Click to expand...
Click to collapse
Google it up
U can do so using terminal

Lineage 14.1 for Honor 6X

Hi! I haven´t got many experience as a developer. I took some time and tried to port Lineage 14.1 to Honor 6X. I don´t know if rom works or even boots and it would be nice if someone can test it!
REMEMBER: This is only a test build and it wasnt tested before so flash the Rom only if you did full reset insturctions and did a FULL TWRP Backup before.
I AM NOT RESPONSABLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE WHILE FLASHING THIS TEST BUILD ON YOUR DEVICE. YOU DECIDE IT ON YOUR OWN AND MAYBE IT WOULD BE BETTER IF THE DEVS TEST THIS BEFORE. TEST ROM ONLY IF YOU KNOW TO RESTORE SYSTEM.
http://www.mediafire.com/file/chs2200tyayol1b/lineage-14.1-20170708-UNOFFICIAL-berlin.zip

It would be great to have some details like the source, credits, instructions, which kernel is it using... Also knowing if it works before posting it would have been a plus.

downloading. going to test tomorrow if boots.

If the mods sees this, this thread is gonna be closed.

adriansticoid said:
If the mods sees this, this thread is gonna be closed.
Click to expand...
Click to collapse
Why?

Android4thewin said:
Why?
Click to expand...
Click to collapse
Because there is no source code link , no source for kernel etc etc..

@XePeleato @Rajeev I am sorry for all that but i haven´t many experience as a dev and this rom was only (tried) to port it from an other device to honor6x. at the moment i need my device 24/7 working so i cant test if it boots.

Android4thewin said:
Why?
Click to expand...
Click to collapse
@Rajeev is right. No credits. I'm sure OpenKirin Team sources are used in this. No link to the sources in OP. No other details whatsoever.
Sent from my Honor 8 using XDA Labs

@felix: at least tell us what device. Why should anyone test and ruin their phone ?

ported from where lol i guess no los14.1 is build for kirin 655 so where u ported dude?

Probably 5x qualcomm. Good intensions though.
Waiting for info.

Nollie8969 said:
Probably 5x qualcomm. Good intensions though.
Waiting for info.
Click to expand...
Click to collapse
Nope. Different SoC.

probably he took p9 lite linOs 14.1 , since both devices have hi6250 soc (the only difference is that honorr 6x soc is overclocked )

simo255 said:
probably he took p9 lite linOs 14.1 , since both devices have hi6250 soc (the only difference is that honorr 6x soc is overclocked )
Click to expand...
Click to collapse
Yes probably.
Sent from my Honor 8 using XDA Labs

So anyone test this rom yet?
Sent from my BLN-L21 using Tapatalk

Anugrah77 said:
So anyone test this rom yet?
Click to expand...
Click to collapse
Looks like no one tested. Yet.

i download the zip, and without flashing i know that will never work. Like felix, has unzip rom zip file, and rezip into a "los14" folder ...
i have unzip the rom, re zip without the "los14" folder. Twrp 3.0.x give me an error 7. try later with Twrp 3.1.1.
Edit: ro.cm.version=14.1-20170531-UNOFFICIAL-eva ?

sanjay.rup said:
i download the zip, and without flashing i know that will never work. Like felix, has unzip rom zip file, and rezip into a "los14" folder ...
i have unzip the rom, re zip without the "los14" folder. Twrp 3.0.x give me an error 7. try later with Twrp 3.1.1.
Edit: ro.cm.version=14.1-20170531-UNOFFICIAL-eva ?
Click to expand...
Click to collapse
If nothing else, it's a reminder that people want Los 14.
OP, good try. Keep working on it and coordinate with others who are.

for me, already try to build a LOS-14. For now, not booting, but only 3 days working for. I have switch with my old nexus 5 and let my honor 6x for dev.
i'm not a rom dev, but a senor web dev, i know linux .... so i just try (but no result for now) !

sanjay.rup said:
for me, already try to build a LOS-14. For now, not booting, but only 3 days working for. I have switch with my old nexus 5 and let my honor 6x for dev.
i'm not a rom dev, but a senor web dev, i know linux .... so i just try (but no result for now) !
Click to expand...
Click to collapse
Goodluck with that.
Sent from my Honor 8 using XDA Labs

LineageOS 15 for Moto X Play by Khushal

This is the thread for LineageOS 15 to the Moto X Play. LineageOS is essentially a continuation of the CyanogenMod project.
Warning: Flashing this may void your device’s warranty, lead
to data loss, hair loss, financial loss, privacy loss, security breaches, or other damage, and therefore
must be done entirely at your own risk. No one affiliated with this project is responsible for your
actions but yourself.

Removed

My godness this is amazing!!
Sorry bout the question.. This lux is my everyday-driver (or so, is the device that i use everyday)
What's working and whats is not?
I really want to have oreo on this baby <3

Device does not boot. Stuck at boot logo. Any fix available or do we have to wait for an update?

1. Plz do not post any most awaited files before proper test.
2. Posting any other devs file without his permission is against XDA rule.
Thanks.

Unable to Install: Error 7
Tried to install using TWRP (I'm currently running AOSPExtended) Seems to think the ROM is for the wrong device.

ksolowoniuk said:
Tried to install using TWRP (I'm currently running AOSPExtended) Seems to think the ROM is for the wrong device.
Click to expand...
Click to collapse
Same

This build is not booting plz don't install wait for next build
Sent from my XT1562 using Tapatalk

Build: 20170908
Khushal253 said:
This build is not booting plz don't install wait for next build
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Downloaded 20170908 and tried to install but ran into the same issue. I'm using TWRP 3.1.0-r1.
-----------------------------------
Warning: No file_context.
E3004: This package is for device: lux, lux_uds, xt1562, xt1563; this device is .
-----------------------------------
I edited the update-script to allow a null device name ie. "" and was able to install. Looking forward to the next build.

ksolowoniuk said:
Downloaded 20170908 and tried to install but ran into the same issue. I'm using TWRP 3.1.0-r1.
-----------------------------------
Warning: No file_context.
E3004: This package is for device: lux, lux_uds, xt1562, xt1563; this device is .
-----------------------------------
I edited the update-script to allow a null device name ie. "" and was able to install. Looking forward to the next build.
Click to expand...
Click to collapse
Is it bootable and what bugs are present there?

Aditya2512 said:
Is it bootable and what bugs are present there?
Click to expand...
Click to collapse
I tried it although it installed after showing the bootloader warning it just went to the fast boot screen without showing any boot logo whatsoever. Guess there is a reason why this isn't public yet.

selvakk said:
I tried it although it installed after showing the bootloader warning it just went to the fast boot screen without showing any boot logo whatsoever. Guess there is a reason why this isn't public yet.
Click to expand...
Click to collapse
Yes,Hope we will see a fully working Lineage OS 15.0 build soon.

Wooooow this is amazing! :')

#notateaser

I want download if sim will working and wifi just what I need

GtrCraft said:
#notateaser
Click to expand...
Click to collapse
#notfair

How i can download? Help me please...

GinoTonny said:
How i can download? Help me please...
Click to expand...
Click to collapse
You'll have to wait. You can check android file host for the file once he uploads it.
https://androidfilehost.com/?w=files&flid=48322

ksolowoniuk said:
You'll have to wait. You can check android file host for the file once he uploads it.
https://androidfilehost.com/?w=files&flid=48322
Click to expand...
Click to collapse
Ok thank you! I can wait *-*

GtrCraft said:
#notateaser
Click to expand...
Click to collapse
If you want tester then just tell me I will test it.