Related
Help,
I rooted my VZW s3 and all was good until i tried to update to a CM10 rom..
It would not install the zip file.. I followed all the guides about backing up the imei file ect.. and I used the correct recovery.. it would not install..I kept getting erros with the ROM zip files I downloaded. so i tried the ez recovery app and installed TWRP.. I like that and have used it in the past.. well I forgot that I cant restore a backup from CWM. so now im stuck bootlooping into TWRP recovery.
Any help?
I was installing TWRP while my GF was talking to me. Not that I'm blaming her or anything but I failed to add the "dd" during the manual install. Now I'm downloading the stock rom and going to try Odin to get my phone functioning again.
Twrp doesn't support kexec, so it will only boot stock based ROM's
sent from locked bootloadrer SGS3 running a custom kernel
wera750 said:
Twrp doesn't support kexec, so it will only boot stock based ROM's
sent from locked bootloadrer SGS3 running a custom kernel
Click to expand...
Click to collapse
can somebody send me a link to a stock rom so I can start this over?
I cant even get adb to recognize my device when its on.. I only have TWRP bootlooping into recovery...
Thanks..
sidn3y said:
I was installing TWRP while my GF was talking to me. Not that I'm blaming her or anything but I failed to add the "dd" during the manual install. Now I'm downloading the stock rom and going to try Odin to get my phone functioning again.
Click to expand...
Click to collapse
Not saying this will help you, but it did with me. I have no idea how.
Tried vol down/home/power and it booted into the custom rom screen. Cancelled that. It rebooted normally..
---------- Post added at 09:48 PM ---------- Previous post was at 09:48 PM ----------
kwiksilvr said:
can somebody send me a link to a stock rom so I can start this over?
I cant even get adb to recognize my device when its on.. I only have TWRP bootlooping into recovery...
Thanks..
Click to expand...
Click to collapse
http://stockroms.net/file/GalaxyS3/SGH-I535/StockROMS.net-SCH-I535_VZW_Verizon.zip
Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.
The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10
djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???
djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!
Good luck... come back to report
djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted
Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!
Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9, kies and smart switch (which says my device is not supported)
What can i do now?
Please help me
Speed™ said:
Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9 kies and smart switch (which says my devie is not supported.
What can i do now?
Please help me
Click to expand...
Click to collapse
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?
Faspaiso said:
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?
Click to expand...
Click to collapse
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode
Speed™ said:
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode
Click to expand...
Click to collapse
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.
I will try it. I'm downloading the firmware right now (so slow)
Is there any way to turn off the phone? I hope it won0t suffer burn in effect because of the static image.
Faspaiso said:
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.
Click to expand...
Click to collapse
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?
Speed™ said:
I did exactly what you said but nothing. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''
afehst said:
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''
Click to expand...
Click to collapse
I don't think i would help because i neither flashed the firmware. Anyway thanks
Speed™ said:
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?
Faspaiso said:
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?
Click to expand...
Click to collapse
I was on 5.0.2.
I used odin 3.10.6, clicked on AP, swlected the TAR file then clicked start. Everything goes OK until the end when odin displays FAIL. Really dunno what problem coulb be
Bring your S6 back to Samsung for warranty repair.
What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app
Cyanandroid said:
What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I can,t access to recovery but can access to odin mode (download mode)
Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Sent from my A0001 using XDA Free mobile app
---------- Post added at 06:42 AM ---------- Previous post was at 06:40 AM ----------
If not then just download the samsung galaxy stock rom zip amd flash it using philz.U can also root ur system using philz recovery as it has an built in rooting option...
Hope it helps
Sent from my A0001 using XDA Free mobile app
Speed™ said:
I can,t access to recovery but can access to odin mode (download mode)
Click to expand...
Click to collapse
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
Cyanandroid said:
Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Click to expand...
Click to collapse
He is simply asking for help. How should he know?
Faspaiso said:
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
He is simply asking for help. How should he know?
Click to expand...
Click to collapse
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.
Try flashing philz recovery.i actually prefer it.
Sent from my A0001 using XDA Free mobile app
Speed™ said:
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.
Click to expand...
Click to collapse
Well if you succesfully flash 5.1.1 your phone works again. No idea what's wrong with your Odin tho. Try delete all the Odin files and download it again (https://www.androidfilehost.com/?fid=95916177934555153).
I THINK you're on 5.1.1 bootloader and modem as I got the same error as you. I flashed 5.1.1 bootloader and modem and could not start phone before 5.1.1 firmware was flashed.
You COULD try follow this again STEP FOR STEP when re-downloaded Odin (and deleted all the old Odin files). http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3 REMEMBER to download the right version for your device. Like if you have SM-G920F it's JUST below the guide, else scroll further. Remember the bootloader and modem should be flashed at the SAME time and is not for the PDA slot. If it succesfully flash them, then try 5.1.1 stock firmware now.
But step for step the guide and be aware of those (DO NOT connect your phone before this step, otherwise it won't work!).
If you don't want to try that all over again (as I THINK you're on 5.1.1 bootloader and modem) you could try download download Odin again (as linked) and try different USB ports + PC's. If you try to flash bootloader + modem again, then try different PC's and USB ports too.
Wait wait guys... I just flashed a newer versione of twrp (
Why the hell i was flashing an older version??? ) and BOOM...it restarted and surprise...5.1.1 upgrade with my data and files (nothing touched and deleted).
I can't figure it out why root on 5.0.2 didn't work...
Finally i got it back working at least.
Thank you guys form you quick support and thank you Faspaiso for the help
Btw, root on 5.1.1 not already available?
Smells like reactivation lock.
So I got my note 5 and tried installing clockwork recovery and now my phones bricked. When trying to flash the stock rom using odin, it always crashes and says fail.
Has anyone had the same problem?
It sounds like your phone is running the newer firmware. You have to flash the full ogd firmware, oa6 firmware will not flash over any of the newer ones.
tdunham said:
It sounds like your phone is running the newer firmware. You have to flash the full ogd firmware, oa6 firmware will not flash over any of the newer ones.
Click to expand...
Click to collapse
any idea where to get the OJ6 Firmware
---------- Post added at 06:26 PM ---------- Previous post was at 05:48 PM ----------
hey this guy is legit he got me up and running again all for $20 http://jcunlocks.com/
spenava944 said:
So I got my note 5 and tried installing clockwork recovery and now my phones bricked. When trying to flash the stock rom using odin, it always crashes and says fail.
Has anyone had the same problem?
Click to expand...
Click to collapse
Clockwork recovery isn't supported for the Note 5. Twrp recovery is what you have to use.
At this point, you can try to flash twrp through Odin or get the stock tar and go back to stock and start the root and flash recovery process again.
Yea what he said. Stock via odin and restarting. The easiest thing would be is to download twrp and flash it via odin. The system/rom should be fine it just the recovery
Why can't I flash via odin???
I have tried with many file but it's still not working...
Anyone can help me? It's said "SW rev. CHECK FAIL. DEVICE: 2, BINARY: 1"
Sunny.Aki said:
Why can't I flash via odin???
I have tried with many file but it's still not working...
Anyone can help me? It's said "SW rev. CHECK FAIL. DEVICE: 2, BINARY: 1"
Click to expand...
Click to collapse
Flash with latest firmware...!
sw rev check fail 2 binary 1
This Problem Happen Because The Bootloader IN firmware OLD or All Firmware OLD
Yeah you need the latest firmware to flash.. Its strange if your flashing the last official stock tar to why its not working. Unless there was something in your last system updates which prevents the boot loader on your phone from downgrading.
---------- Post added at 04:40 PM ---------- Previous post was at 04:09 PM ----------
Now that I am thinking about it it might be the latest odin flashable firmware you have is lollipop cause the marshmallow update still might be new and no one has snagged the tar from kies and maybe samsung hasn't released the source code yet. So It could be you just can't downgrade the boot loader from marshmallow to lollipop.
Not working at all...
Anoopvs2012 said:
Flash with latest firmware...!
Click to expand...
Click to collapse
Odin failed trying to downgrade from Marshmallow please help
Sunny.Aki said:
Why can't I flash via odin???
I have tried with many file but it's still not working...
Anyone can help me? It's said "SW rev. CHECK FAIL. DEVICE: 2, BINARY: 1"
Click to expand...
Click to collapse
I have the same problem. The last thing I did be that happen is is install Xposed framework and then reboot. Never rebooted after. What j7 you have, j700m?
brenty108 said:
I have the same problem. The last thing I did be that happen is is install Xposed framework and then reboot. Never rebooted after. What j7 you have, j700m?[/QUOTE
J700H, bro. but now i can use stock rom with different way. just using smartswitch
Click to expand...
Click to collapse
Odin failed
brenty108 said:
I have the same problem. The last thing I did be that happen is is install Xposed framework and then reboot. Never rebooted after. What j7 you have, j700m?
Click to expand...
Click to collapse
I have J700F, I just need to downgrade to lollipop please help
Jai29borse said:
Odin failed trying to downgrade from Marshmallow please help
Click to expand...
Click to collapse
Goto custom recovery and flash any lollipop custom roms for j7, and reflash the stock rom via odin
Anoopvs2012 said:
Goto custom recovery and flash any lollipop custom roms for j7, and reflash the stock rom via odin
Click to expand...
Click to collapse
Okay I will try and let you know thanks a lot for reply ..
I still haven't got mines to work. Smartswitch doesn't work for my model and FAP blocks me trying to go into twrp. Odin also fail.. I'm completely locked out of the phone. And Samsung doesn't have a service center in my country. I got J700M dual sim. I got $260USD paper weight now.
Jai29borse said:
Okay I will try and let you know thanks a lot for reply ..
Click to expand...
Click to collapse
I tried it but did not work.... so finally being sad I thought that I will have to live with Marshmallow only ... so it just came into my mind that I can have S5 neo rom installed so I got it flashed then again idea came into my mind lets just try to flash stock lollipop thru odin then I tried it .......... you wont believe it worked for me .... ohhhh finally I got stock lollipop installed in my phone..
thanks a lot for all you help..
---------- Post added at 08:56 AM ---------- Previous post was at 08:54 AM ----------
brenty108 said:
I still haven't got mines to work. Smartswitch doesn't work for my model and FAP blocks me trying to go into twrp. Odin also fail.. I'm completely locked out of the phone. And Samsung doesn't have a service center in my country. I got J700M dual sim. I got $260USD paper weight now.
Click to expand...
Click to collapse
HI there,
I also tried it but did not work.... so finally being sad I thought that I will have to live with Marshmallow only ... so it just came into my mind that I can have S5 neoV3 rom installed so I got it flashed then again idea came into my mind lets just try to flash stock lollipop thru odin then I tried it .......... you wont believe it worked for me .... ohhhh finally I got stock lollipop installed in my phone..
SO YOU CAN ALSO DO THIS.
Jai29borse said:
I tried it but did not work.... so finally being sad I thought that I will have to live with Marshmallow only ... so it just came into my mind that I can have S5 neo rom installed so I got it flashed then again idea came into my mind lets just try to flash stock lollipop thru odin then I tried it .......... you wont believe it worked for me .... ohhhh finally I got stock lollipop installed in my phone..
thanks a lot for all you help..
---------- Post added at 08:56 AM ---------- Previous post was at 08:54 AM ----------
HI there,
I also tried it but did not work.... so finally being sad I thought that I will have to live with Marshmallow only ... so it just came into my mind that I can have S5 neoV3 rom installed so I got it flashed then again idea came into my mind lets just try to flash stock lollipop thru odin then I tried it .......... you wont believe it worked for me .... ohhhh finally I got stock lollipop installed in my phone..
SO YOU CAN ALSO DO THIS.
Click to expand...
Click to collapse
Your flashed it through Odin? Can you send me a like? And you have what device again? Thanks
Help me!!
Can someone tell how to fix Samsung J700F 5.1.1 kernel is not seandroid enforge..
brenty108 said:
Your flashed it through Odin? Can you send me a like? And you have what device again? Thanks
Click to expand...
Click to collapse
Yes flashed thru Odin, how to hit thanks ? please guide
Sunny.Aki said:
Why can't I flash via odin???
I have tried with many file but it's still not working...
Anyone can help me? It's said "SW rev. CHECK FAIL. DEVICE: 2, BINARY: 1"
Click to expand...
Click to collapse
Solved!!!!!! I downloaded the latest firmware from SamMobile website and flashed through download mode using ODIN.
brenty108 said:
Solved!!!!!! I downloaded the latest firmware from SamMobile website and flashed through download mode using ODIN.
Click to expand...
Click to collapse
Gr8 enjoy now , please hit thanks !!
Anoopvs2012 said:
Flash with latest firmware...!
Click to expand...
Click to collapse
its dont Work Man
Flash the custom recovery and stock optimized man
seven4grindBR said:
its dont Work Man
Flash the custom recovery and stock optimized man
Click to expand...
Click to collapse
Just try another. Even the latest one. Use Sammobile
Sunny.Aki said:
Why can't I flash via odin???
I have tried with many file but it's still not working...
Anyone can help me? It's said "SW rev. CHECK FAIL. DEVICE: 2, BINARY: 1"
Click to expand...
Click to collapse
What's your device model , u must enable oem unlock in developer settings before flashing
Guys just enable OEM unlock before going to the bootloader .. Then the odin will pass
Don't forget to disable it again after root install operation success