[size=+3]Hello friends I'm introducing an App by CWM which can be used to backup app+data even WITHOUT ROOT !!!![/size]
[size=+2]DOWNLOADS :[/size]
(1)Helium app - DOWNLOAD
(2)Helium for PC -DOWNLOAD
[size=+2]Now you have to follow these steps :[/size]
(1)Install Helium app on your phone as well as Helium for PC on your PC .
(2)Now enable Developer option on your phone by tapping build number 7 times in Settings >> About phone (Skip this step if already enabled).
(3)Now enable USB debugging in Developer Options.
(4)Connect your phone to your PC.
(5)Open Helium installed on your and on your phone and follow instructions to activate it.
[size=+2]Now helium is activated on your phone and you can backup & restore your Apps as well as their data
NOTE : If you reboot your phone, you will have to activate it again via PC[/size]
[size=+4]HIT THANKS IF I HELPED[/size]
Reserved
Sent from my Moto E using Tapatalk
Related
HOW TO TAKE BACKUP WITHOUT ROOTING VIA PC
Here is Simple Guide To Make Backup Of whole Data when installing any new rom:-
First download this software on PC-Mobogenie
Install and Run it
Then Go to Developers Options on your Mobile if not showing then go to About phone option and there click on 7 times on Build Number then you will get developers option in settings.Now enable Usb Debugging.
Now connect your Phone to Pc via Cable and Choose Usb storage or Media Transfer.Then switch to mobogeine software in pc.Your Phone will be connected in pc after some driver download and connected.
Now go to "my Phone" tab and choose backup option.
Backup your desired data to desired place.
Choose restore tab to restore data whenever required
NOTE:-IT TAKES BACKUP OF APP & THEIR DATA ALSO.
This is pretty good too
https://play.google.com/store/apps/details?id=tw.nicky.AppBackupReinstall&hl=en
hello Friends...
now you can easily root your karbonn A16 mobile...
Simple steps are here
>Download and install SRS One Click Root on your PC.
>On your phone, go to Settings > Developer Options and tick USB Debugging to enable it.
>Connect your phone to the PC using USB cable.
>Slide the notification bar down and make sure that your phone is connected as USB Storage. If it isn’t already, you can change it to USB Storage by tapping the Touch for other USB options notification.
>Open SRS One Click Root app on PC.
>Select the option that says Root Device (All method).
>After a while, your phone will ask if you want to install the application SRS Root is sending you over ADB.
>Tick the checkbox and select Install.
>When a popup appears on your phone asking you to choose the exploit, select Install SuperSU and click on Bormir.
>A Success message will be displayed on your phone as well as PC.
>Reboot your phone and check if you are rooted.
you can download SRS one click root from here
Mod Edit: Links removed because they were pay per clicks
Nokia X2: Rooting & Installing Google Play Store after upgrading Nokia X2 to 2.1.0.12
Rooting and Installing Google Play Store after upgrading Nokia X2 to 2.1.0.12.
Did this right after upgrading to v2.1.0.12 with nothing else installed.
Upgraded to v2.1.0.12 using the Lumia/Nokia Software Recovery tool.
NOTE: Disable any Anti-Virus installed on the machine before running this.
Though it did not report any malicius code, on running it with turned On gave errors regarding running ADB daemon.
(I use Avast Anti-Virus)
1. Download Nokia x2 tools from the given link .
http://allnokia.ru/soft/moreinfo-115.htm
2. Enable developer mode and USB debugging on the phone:
To activate the developer mode go to Settings - About phone, and tap 5 times to "Software version".
To activate USB debugging go to Settings - Developer options - USB debugging.
3. Connect phone to PC with USB cable and run Nokia X tools v1.2.
4. First install the drivers typing 1 (i.e. "1 - Install Drivers for Nokia X2") and press enter.
After drivers are successfully installed reboot phone and also reboot PC.
5. Again connect the phone to PC and make sure it is in developer mode and USB debugging is enabled.
Enable root access by typing 4 (i.e. 4 - Gain Root-access (SuperSU 2.02)) and press enter.
Press enter if it ask if drivers are installed.
Note the instructions given after Root Access is successfully enabled.
Reboot phone and run the SuperUSer App as per the instructions noted in the command prompt.
6. Install Google Play Services by typing 2 (i.e 2 - Install GOOGLE PLAY + Services) and press enter.
Press enter if it ask if drivers are installed.
Reboot phone after Google Play Services is successfully installed.
Reference links:
http://www.openeducationusa.com/?p=29482
http://forum.xda-developers.com/nokia-x2/general/tool-nokia-x2-tools-1-1-rus-en-rooting-t2846570
In case of any issue you can use the Lumia/Nokia Software Recovery tool to reinstall fresh OS v 2.1.0.12.
The tool can be found here:
http://download-fds.webapps.microso...covery/LumiaSoftwareRecoveryToolInstaller.exe
Bro is it working on my Nokia x2ds version 2.1.0.11 ? Plz inform me. I want to root my mobile.
This Root method is for every leTV phone. I have tested this on both my X600 and X500.
Requires:
Any Windows Computer
iRoot
The following video shows how its done:
About iRoot (VRoot)
iRoot is a pretty popular phone hacking tool in China. I have installed this app personally and found it is safe for your computer. This app however does trigger a 17/53 Virus detection ratio on Virus total. The reason for this is that iRoot installs a few apps onto your phone during the installation process (you can uninstall them once your done). You can find more information about iRoot on XDA:
http://forum.xda-developers.com/showthread.php?t=2434453
If you prefer a cleaner installation, check out my manual root tutorial.
Method:
Connect your phone to your computer and enable USB debugging (See video)
Install iRoot - Download (make sure you download the PC version. Android version does NOT work)
After running iRoot, allow USB debugging authorization on your phone (pop -up prompt)
Usb debugging popup
Click the Green Root button on your PC. (you can ignore other popup prompts on your phone.)
That's it! Your phone will turn black for 2 seconds and enter TWRP. Please do not turn off your phone or disconnect your phone during this period. The phone will then automatically install the root and reboot.
Did this root procedure work for you? Leave a comment below!
Working on Letv x600 but TWRP is in China language.Any idea how to change for English one.
Download twrp theme manager from play store and then choose any theme and then apply that theme and this will also change your twrp into English. Thanks.
Hello, will this method erase anything on x600?
Rooting LeTv 1s x507 Indian Version SuperSU
for those who have a Indian Version, please check this video
Personally I am not fan of kingroot or iroot for ome reasons, I prefer pushing supersu from recovery which is more transparent way to Root.
however I needed to flash a userdata image provided by a user "naeem" to be able to gain root.
Phone will get Factory reset but once done, this works perfectly, I've been using it for 2-3 weeks and haven't had any issues except the ones
which are bugs on stock OS.
I cant root my phone (letv max) any idea? I tried alot of thing(i root/kingroot/towelroot) with apps/with p.c.
I have a Nexus 5 on 6.0.1 and I'm wondering what tool to use to root it. I've never done rooting before, so bare with me here.
Please Try this.
1. Enable USB Debugging in your phone from Developer options.
(To enable Developer options, go to Settings >> About phone >> Tap 5 times on Build Number)
2. If you’ve not installed USB drivers for your device then wait for the device to automatically install them. If it doesn’t, then download them from here.
3. Download and install iRoot.
4. After successful installation, open it.
5. Connect your Android device to the computer.
Once your device is successfully connected to iRoot, it will automatically detect your device.
6. Now click on “Root” to start rooting process.
WARNING: Don’t touch USB cable while rooting is being done as any interruptions may cause hard-brick (permanent device failure) to your device.
Once successful root, your phone will automatically reboot.
7. Now download and install SuperSU from Google Play store to control root permissions.
Done!
That’s all. Your device is now successfully rooted. To check whether your device is successfully rooted or not download Root Checker from Play Store
Sent from my Nexus 6P using Tapatalk
Nambardar said:
Please Try this.
1. Enable USB Debugging in your phone from Developer options.
(To enable Developer options, go to Settings >> About phone >> Tap 5 times on Build Number)
2. If you’ve not installed USB drivers for your device then wait for the device to automatically install them. If it doesn’t, then download them from here.
3. Download and install iRoot.
4. After successful installation, open it.
5. Connect your Android device to the computer.
Once your device is successfully connected to iRoot, it will automatically detect your device.
6. Now click on “Root” to start rooting process.
WARNING: Don’t touch USB cable while rooting is being done as any interruptions may cause hard-brick (permanent device failure) to your device.
Once successful root, your phone will automatically reboot.
7. Now download and install SuperSU from Google Play store to control root permissions.
Done!
That’s all. Your device is now successfully rooted. To check whether your device is successfully rooted or not download Root Checker from Play Store
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Does me being on the current build make a difference??