This Root method is for every leTV phone. I have tested this on both my X600 and X500.
Requires:
Any Windows Computer
iRoot
The following video shows how its done:
About iRoot (VRoot)
iRoot is a pretty popular phone hacking tool in China. I have installed this app personally and found it is safe for your computer. This app however does trigger a 17/53 Virus detection ratio on Virus total. The reason for this is that iRoot installs a few apps onto your phone during the installation process (you can uninstall them once your done). You can find more information about iRoot on XDA:
http://forum.xda-developers.com/showthread.php?t=2434453
If you prefer a cleaner installation, check out my manual root tutorial.
Method:
Connect your phone to your computer and enable USB debugging (See video)
Install iRoot - Download (make sure you download the PC version. Android version does NOT work)
After running iRoot, allow USB debugging authorization on your phone (pop -up prompt)
Usb debugging popup
Click the Green Root button on your PC. (you can ignore other popup prompts on your phone.)
That's it! Your phone will turn black for 2 seconds and enter TWRP. Please do not turn off your phone or disconnect your phone during this period. The phone will then automatically install the root and reboot.
Did this root procedure work for you? Leave a comment below!
Working on Letv x600 but TWRP is in China language.Any idea how to change for English one.
Download twrp theme manager from play store and then choose any theme and then apply that theme and this will also change your twrp into English. Thanks.
Hello, will this method erase anything on x600?
Rooting LeTv 1s x507 Indian Version SuperSU
for those who have a Indian Version, please check this video
Personally I am not fan of kingroot or iroot for ome reasons, I prefer pushing supersu from recovery which is more transparent way to Root.
however I needed to flash a userdata image provided by a user "naeem" to be able to gain root.
Phone will get Factory reset but once done, this works perfectly, I've been using it for 2-3 weeks and haven't had any issues except the ones
which are bugs on stock OS.
I cant root my phone (letv max) any idea? I tried alot of thing(i root/kingroot/towelroot) with apps/with p.c.
Related
NOTE: Click on the images to enlarge them!!!:good:
DISCLAIMER: Rooting your phone will void your warranty, and can be dangerous. You may end up with a “bricked” device if anything goes wrong. I take no responsibility if something happens to your device. If you are ever in doubt STOP! This is not something to take lightly!
While rooting is reversible, it’s not something you should ever plan to do. Use some common sense here. If you don’t understand the consequences of what you are doing, DO NOT ROOT YOUR PHONE! You have been warned.
View attachment 2312405
So you have bought the GT-S5282 and after getting bored of playing with it have decided to give the ultimate treatment to your new toy, ROOT IT!!!
Well you have come at the right place. Today I will share with you friends a ridiculously easy way to root your Samsung Galaxy Star Duos. Your droid should be running stock firmware and you need Windows OS running on your computer.
Just follow the steps mentioned below carefully:-
1. Download the version of Cydia Impactor for Windows OS from this link www.cydiaimpactor.com
2. Install your device drivers by installing Samsung Kies on your PC and then connecting your phone to your PC via data cable. The device drivers will be installed automatically after few minutes.
OR
Alternatively you may install ADB drivers from the given link adbdriver.com and after turning on USB debugging in the Developer Options of your droid and connecting it to your PC via data cable, clicking on the Install option the drivers will be installed automatically.
3. Enable USB debugging from Developer Options in your droid (if you have not enabled it previously) and connect your droid to your PC via data cable.
4. Extract the file downloaded in first step and run Impactor.
View attachment 2312448
5. The programme should be displaying the command # drop SuperSU su to /system/xbin/su as shown above. Click start and run this command in the Impactor and wait for a few seconds for the process to get completed. When the programme again displays the above command, WOW you have successfully rooted your phone!!!:highfive:
6. Last but not the least you need to install these free apps from the Play Store before you enjoy root privileges on your droid....
i. SuperSU - This is required to access Superuser privileges on your droid. https://play.google.com/store/apps/details?id=eu.chainfire.supersu
ii. BusyBox - This is required to install the BusyBox binaries on the rooted device which is needed to run some root apps. https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
NOTE: Installing the above two apps are a MUST to access ROOT features on the phone!!!
7. TADA! You are now free to enjoy your ROOTED Samsung Galaxy Star Duos and unleash the hidden power user within you...!!!
NOTE: This method only works on preupdated old firmwares. If you get "signature bugs unavailable" error, it means you are running the latest/updated version of the stock firmware which comes with the bugs patched. For you guys who get this error, you need to flash the old stock ROM released before August for your device. You can download the stock firmwares from here http://samsung-updates.com/device/?id=GT-S5282
You need to flash the stock firmware on your droid via Odin. For help regarding how to flash stock ROM via Odin, check out this thread http://forum.xda-developers.com/showthread.php?t=2482371
If I have helped you to root your GT-S5282, please press the THANKS button...:good:
Hello to everyone.
I'm using Lenovo A560 and want to root it to delete all those junk, built-in apps so that my RAM usage will decrease. I have tried many times using various root software (rootgenius, kingo, framaroot) yet didn't successful to root my a560. I have already installed usb driver for lenovo a560. Anyone can help me? I already have tried to root my phone like in the http://forum.xda-developers.com/showthread.php?t=2769260 thread but still the same problem occurred.
When i used rootgenius, my phone just reboot and reboot until 86% and the process failed. same on the kingo (except my phone did not reboot like before, it just failed after a reboot). In framaroot, the #error 6 message pop out.
Anyone can help me how to root my phone please? My phone system:
Android 4.3
Baseband ver : A560_A_0001_140330
Kernel Ver: 3.4.0-g80ec9c8-01182-gb30d6a7-dirty [email protected] #6
Build Num : A560_S010_143330
#just put every details for that i'm a newbie in these things. Any help would be very appreciated. (manual root not recommended, but still can try~)
Thanks!
Same problem here. Anyone can help please? Android 4.3 running on Lenovo A560.
problem solved.
I finally managed to root my a560 by installing the driver from the phone into the PC . Then I used iRoot to root my phone. It works! I followed the methods provided by a Russian blog (cannot post outside link because I'm a new user,credit to the blog)
Here's the methods (translated, contains grammar errors).
Remember, you're doing it at your own risk. The site administrator can not be held liable for the actions that you make.
1. Download and install the program on your computer VRoot
2. Disable antivirus (as needed).
3. Run the program, connect the device to your computer (if it is not defined, then try to install the drivers from the official site of your device). On the phone should be included: Debugging via USB, install from unknown sources in the USB connection must be uncheck MTP and Camera (RTR).
4. Once the device is determined, press the bottom right button green "ROOT", and wait.
5. Then, after the last window, the device will reboot (And it can be disconnected from the computer).
6. Root entitled to receive!
Russification (Thanks to Timur):
- Set on the PC this Chinese VRoot
- Put on sotik "Chinese" root-rights
- Then go to the Play Store, we set out SuperSU
- Run it, he will offer to update binary.
- Click to continue, and then click "OK". Pops request of the Chinese root.
- Press the right button zelёnenkuyu. After SuperSU say that the installation is successful, it will prompt you to delete other applications control root-access.
- Click "Yes" forward (SuperSU remove our "Chinese" and replace it with a more simply). Writes again about the successful installation.
Note : The phone will ask you something in Chinese after you root the phone. Just click the right button when the phone pop-up something after you root. This is because right button is the 'YES' and left one is 'NO' and i think that is the phone is asking for root permission.
P/s : for some reason I cannot delete the pre-installed software on my phone, even using root explorer. Anyway, the softwares that need the phone rooted can be installed.
How to Step by Step to Successful root on the ASUS A86
The author of the text / manual assumes no
Warranty on damage to the device or functionality
Requirements:
USB cable
Windows PC (<-> solution for Linux I work on it)
PC Suite OnekeyrootSetupv1.9.2.0_700000 (download via private cloud)
Procedure:
Download PC app.
Install PC app
USB debugging switch (Settings - Security)
rooten Phone:
push button to rooting.
After pressing the button the phone does a reboot.
Press the button again after this reboot:
After this root, the program can be uninstalled directly again.
Now there are two programs on the telephone:
CHINA Wartungsapp:
(This may be immediately deleted / Uninstalled)
KINGROOT:
(Kingroot can be replaced by any form of superuser app.
Attention only KINGROOT uninstall if another SU APP
is fully installed)
NOW is our A86 fully rooted
Again, the instructions in plain text form:
Code:
The new ASUS Padfone Infinity 2 (A86) Root Instructions
The author of the text / manual assumes no
Warranty on damage to the device or functionality!
requires:
USB cable
Windows PC (<-> solution for Linux I work on it)
PC Suite OnekeyrootSetupv1.9.2.0_700000
cloud.lange23.de/public.php?service=files&t=8c042bf30af0951c7fac2aac622f36e2
procedure:
Download PC app.
Install PC app
Phone rooten. by a click on Root.
After pressing the button, the PC app, the phone does a reboot.
Press the button again after this reboot.
Now the phone is rooted.
After this root, the program can be uninstalled directly again.
Now there are two programs on the phone:
A China Wartungsapp (This can immediately be deleted / Uninstall)
And a super user program (Kingroot can be replaced by any form of superuser app. Caution only uninstall KINGROOT when another SU app is fully installed)
Now our phone is fully rooted !!!
Video - How to Use China PC APP
PS: This way of Rootens also works for:
ZTE, Huwai, Samsung, HTC, chinaware, Medion
According to the manufacturer, this fold even at 80% All Android 4.4.
happy testing!
I finally managed to find a successful root method for micromax canvass hue.Before this method i tried rooting with iroot,root genius and many phone apps that turn wheels on phone screen and finally a tick appears which means your phone has been rooted.But that tick never appeared on my phone.I kept searching and found an pc app like iroot that worked for me.STEPS
1: Download Kingo Root Here (download.cnet.com/Kingo-Android-Root/3000-2094_4-75996768.) html {copy link and remove ( and ),i.e,brackets add www before download. cnet and remove spaces in url}
2: Download canvass hue drivers from here www .(goo.gl/9rH8)if {copy link and remove ( and ),i.e,brackets and remove spaces in url}
3: Install Kingo root on your pc .connect ur phone via usb cable.Enable USB Debugging and make sure u have a working internet connection on your pc
4: Open Kingo root and it will automatically install required software to root ur phone and in five minutes it will root ur phone.
5: Use root checker app from play store to verify root access.
6: Download superuser (cmw one) from play sore and install and open it.follow simple instructions there .Your phone will reboot and ur done.
Note: Try this method without downloading micromax canvass hue drivers first as kingo root automatically downloads required drivers. If u face any problem tell me.And dont forget to hit thanks button
Problem in Downloading kingo root from the link
if there is a problem in downloading kingo root from the link i provided just google "download kingo root for pc" and download from cnet
i had bought this phone from local distributor in Egypt less than one month ago.
i had tried several rooting methods starting from MTKtools to Vroot methods
unfortunately all had failed
through this simplified tutorial i will guide you how to root your G-TiDE V1 simply and obtain full root access
we all know that "the best thing for android is just root"
there are no need for TWRP/ CWM to root via this method
you just need your V1 device,
functioning USB cable,
windown runing combuter,
and an internet connection for both.
1st download and install china phones USB drivers http://ge.tt/2yL21VT thanks @rua1
download and install MTk droid tools http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922 thanks @rua1
you have to try which driver would make your device readable by the droid tools
do not froget to activate USB debugging option in developer option menu after tabbing build number 7 times in about phone.
do not try to root via droid tools as it will not work
download and install Iroot version 1.7.9 to your PC and Vroot app to your phone.
https://drive.google.com/file/d/0B3ZlnmUEzg9jRWltQmRwTjA2SEk/view?usp=sharing
https://drive.google.com/file/d/0B3ZlnmUEzg9jZm9MUUtUWGk2aGs/view?usp=sharing
all your things are ready now
try to root your internet connected phone using vroot.apk
it will say succeeded and ask for a reboot: reboot yor phone
you will notice that a new crowned white lion app with blue shield (Chinese superuser app)
when you open it you will find no root access and iroot recommendation: install iroot and repeat the above steps
your phone still unrooted till now while when you connect it to droid tools it will show yellow box saying that the file bin/su is found click root to get root shell ( do not try; it will not work.
now reboot your phone to recovery from droid tools
perform wipe cache and factory reset then reboot
activate your phone developer option and tick USB debugging
open iroot PC application
connect your phone, when phone is detected try computer based rooting
it will reboot phone twice and then your device is now rooted: congrats
if you hate Chinese superuser app use the following tutorial to replace with SuperSu
http://neyomissright.credit495.ru/watch/crLvs8ec0FE/httpsyoutubecomdevicesupport.html
i am doing this now :fingers-crossed:
not to forget to thank all people and all sites that i read through them to do this.:good:
this is a call for all carrying G-TiDE V1 to be here to start a big development project.
enjoy.
photos and screenshots to be posted.
reminder
do not try nto replace super user app using this tutorial
http://neyomissright.credit495.ru/watch/crLvs8ec0FE/httpsyoutubecomdevicesupport.html
it will cost you your root.
it is just a spam.
I would advise you to try Root Genius which I had succeeded in gaining root from MT8732 tablet Ainol AX10-4G. The current version is RootGenius_en_2.2.6.exe not version 1.8.7 as shown in their English site.
There is APK version available from Official Chinese site but I managed to try out PC version only. Good luck
I need g-tide V1 software....pl help me