I tried to flash my device with flashify, and after I did, It rebot and now It's stuck at the boot logo I can only put my phone on Download mode, the power up recovery settings doesn't not work at all, I tried flashing it back to firmware but I will get "CHECK FAIL DEVICE: 3 BINARY: 2" any help I downloaded the right firmware, my device that I got is, Samsung s6 edge (SM-G925P) any help !
Flash the right kernel! I had the same issue!
I had the same problem. Just flash recovery firmware for your device using Samsung Smart Switch. Works perfectly.
delete
AutoRemixSound said:
I tried to flash my device with flashify, and after I did, It rebot and now It's stuck at the boot logo I can only put my phone on Download mode, the power up recovery settings doesn't not work at all, I tried flashing it back to firmware but I will get "CHECK FAIL DEVICE: 3 BINARY: 2" any help I downloaded the right firmware, my device that I got is, Samsung s6 edge (SM-G925P) any help !
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.
Related
my s5 stuck at about 75% with an android with a spinning box, i can't get into recovery mode it says "recovery not seandroid enforcing". my s5 is unrooted, if i try to reboot it it gets stuck on samsung logo.
JOB....T said:
my s5 stuck at about 75% with an android with a spinning box, i can't get into recovery mode it says "recovery not seandroid enforcing". my s5 is unrooted, if i try to reboot it it gets stuck on samsung logo.
Click to expand...
Click to collapse
the only thing you can do is to search how to use odin ...and install the latest firmware of your device and flash it via odin
flash- said:
the only thing you can do is to search how to use odin ...and install the latest firmware of your device and flash it via odin
Click to expand...
Click to collapse
when my device got stuck i had not rooted it plus i had not ticked the usb debugging in developer options, will odin still be able to load a new software????
JOB....T said:
when my device got stuck i had not rooted it plus i had not ticked the usb debugging in developer options, will odin still be able to load a new software????
Click to expand...
Click to collapse
follow this guide and if you need more info go here
ok so my Samsung galaxy s6 is stuck in download mode i tried to do a clean flash to install a rom but it failed and now i can only go to download mode its dose not boot up or anything i tried flashing twrp through odin did not work i tried flashing stock firmware didn't work smart switch and kies3 dont recognize my device the device is a sm-G920T when i tried flashin the frimware i get sw rev check fail device 5 binary 2 pls help
Alrighty, I have S8 Plus and it was already rooted so it had the twrp recovery, i've wanted to format my phone , but i ticked the system too soo yeah, I cant turn off my phone, cant enter into recovery mode, cant boot it up, can only access download mode or to get stuck on the Samsung Galaxy S8+ boot.
I've tried downloading firmwares but when i flash it fails with odin, I have no clue which one is the right firmware, my android version is 7.0.0.
please help me out.
AnonyDope said:
Alrighty, I have S8 Plus and it was already rooted so it had the twrp recovery, i've wanted to format my phone , but i ticked the system too soo yeah, I cant turn off my phone, cant enter into recovery mode, cant boot it up, can only access download mode or to get stuck on the Samsung Galaxy S8+ boot.
I've tried downloading firmwares but when i flash it fails with odin, I have no clue which one is the right firmware, my android version is 7.0.0.
please help me out.
Click to expand...
Click to collapse
What errors are you getting in odin
AnonyDope said:
Alrighty, I have S8 Plus and it was already rooted so it had the twrp recovery, i've wanted to format my phone , but i ticked the system too soo yeah, I cant turn off my phone, cant enter into recovery mode, cant boot it up, can only access download mode or to get stuck on the Samsung Galaxy S8+ boot.
I've tried downloading firmwares but when i flash it fails with odin, I have no clue which one is the right firmware, my android version is 7.0.0.
please help me out.
Click to expand...
Click to collapse
Samsung Device Firmware Restore with Smart Switch program and factory reset
https://www.youtube.com/watch?v=9QhJngOuLQ4
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
ToadNugget said:
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
Click to expand...
Click to collapse
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
It_ler said:
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
Click to expand...
Click to collapse
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
ToadNugget said:
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
Click to expand...
Click to collapse
Check this thread:
Sw rev. Check fail. Device: 5, binary 3
Hi, I've got a Galaxy S6 G920F on Vodafone that I am trying to downgrade from 7.0 to 6 or 5 so that I can go through with an unlocking procedure but I keep getting the error message " SW REV. CHECK FAIL. DEVICE: 5, BINARY 3". Can anyone help?
forum.xda-developers.com
Seems that you have to flash another firmware version.
Hi Guys,
Device: Samsung Galaxy Note N7000
Power On: Stuck with popup "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Stock ROM: can't locate firmware for those BL, AP, CP, CSC files
Anyone can help? Appreciated.
Cheers
I couldn't find any dedicated forum for galaxy A7 tab so posting here.
I was trying to install TWRP -
1. First I installed vbmeta.img using USERDATA option in Odin.
It wiped all data and restarted the device.
2. After that I again put it in download mode and tried to flash TWRP using AP option in Odin.
I guess somehow OEM unlock got disabled (i am guessing when it rebooted in step 1)
And now I am getting error as attached in the image.
Now I am trying to install stock firmware but now Odin is stuck at 'setup connection'
I tried reinstalling usb driver and restarting PC but nothing is fixing the error now.
Please Help me unbrick the tab.
The tab keeps showing the same error no matter what I try. I am not even able to turn the tab off now.