Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
Hello. I have Galaxy Core 2 (duos) that is stuck at some strange problem - can't even finish startup configuration, huge amount of errors "this and this has stopped" Stock recovery is not working, vol up+home+pwr gives dead android and restarts
Have already tried:
1. firmware initializing via Samsung switch - Switch tells SUCCESS
2. stock rom flash via Odin (from Sammobile) - Odin tells SUCCESS
3. pit file re-partition via Odin - Odin tells SUCCESS
4. efs clean - Odin tells SUCCESS
5. flashing different recoveries via Odin - all SUCCESS
Odin gives Success but after restarting phone, the same problem is back. Can't even finish startup configuration, after some amount of pressing OK OK OK etc. device just restarts.
Device:
Samsung Galaxy Core 2 SM-G355HN
Anyone???
Maybe i can do something with ADB or...?
I had rooted my note 3 neo sm-n750 device twice before through odin. i had never faced issues as i m having now.
i had rooted my n3n earlier and also revert it to stock through odin, but i mistakenly installed "INS" version of rom where my devicebox indicates "INU". after that i re-tried rooting same device through odin method. my device connected perectly also i dont get any error throughout the process but my device download mode not respond to any update so odin process stuck. i tried every wayout available at android forums i got nothing helped me out. so i decided to root my device by apk available in market. i installed kingoroot and it rooted my device properly. after that i installed flashify apk to flash recovery and after that i got a pop-up asking to reboot in recovery. i pressed reboot and it wont reboot into recovery whereas it stuck at n3n startup logo. now i m not even able boot into stock recovery, and my downloading mode also not responding. i tried kies firmware installation and updation process. my device connected perfectly downloaded require files but stuck after downloading procedure as my downloading mode isnt responding. i have only option to boot in download mode only.
please help me.
Thanks in advance.
Hello and welcome to Assist
Please register an account and ask for help in your device section linked below, making sure you include as much detail as possible
https://forum.xda-developers.com/note-3-neo/help
Good luck
Guys I tried rooting my phone(SM-G930F) now and after rooting it didnt work and the fone keeps rebooting at the samsung logo stage and wont get passed that stage. Even after i tried to reinstall my original firmware using odin and it says failed and keeps rebooting at that samsung stage continuisly. i tried to install magisk through twrp but i unziped rar folder and wasnt able to see anything in my storage. Please what should i do?if i press volume down+power+home button it takes me to download mode and when i try to flash my stock firmware using odin it says fail just like the screenshot below. PLEASE HELPView attachment 4117373
I have a Samsung Galaxy S Duos GT-S7562 which stopped working with no warning a few months ago. The device has stock Samsung firmware and has never been rooted.
On power-up the device hangs on the Samsung logo.
When a charger is attached the battery charge animation is frozen.
Both stock recovery and download mode are working.
Attempted a factory reset and clear cache through recovery mode. Both showed as successful. Still hangs at Samsung logo.
Attempted to flash official Samsung stock firmware through Odin3. Flash succeeds with no error but restart still hangs at Samsung logo.
Attempted to flash TWRP recovery through Odin3. Flash succeeds with no error but recovery mode still comes up as stock rather than custom.
Why would Odin3 report a successful TWRP recovery flash but the device still boots the stock recovery? I have another identical S7562 that I successfully flashed the same TWRP recovery and Samsung stock firmware using the same setup, Odin3, PC and USB cable. Both are unlocked devices. Disabling auto-restart in Odin3 and attempting to boot straight to recovery after flashing doesn't help.
I suspect that a JTAG recovery may be my only option but from what I've read it should only be attempted if stock recovery and download mode are *not* working. In my case both appear to be working. Would a JTAG recovery help in this case?
Could there be some sort of NAND memory failure that does not result in any error messages during an Odin3 flash?
Thank you for any help!
I guess JTAG is the only way. Sorry.