So when I got my k1 yesterday it was on 5.1.1. I unlocked the bootloader and also flashed twrp and rooted. I then let the ota file download and then I tapped on flash, it then rebooting into twrp and flashed it. My k1 rebooted with 6.0 then, but my root was gone. I tried to reboot into twrp to reinstall SuperSU and it seemed like the 6.0 erased twrp somehow. I have been trying to flash twrp 2.8.7.3 with the command fasboot flash recovery twrp.img. Once I flash it and try to reboot into recovery it just stays on the nvidia splash screen. So what can I do to be able to get twrp on my k1 with 6.0 on it?
Not entirely sure, but I think you're going to have to wait for an update to TWRP for MM. I think recoveries are BL dependent, and I believe the BL did in fact update with the recent upgrade to Android M.
SeekingSight said:
Not entirely sure, but I think you're going to have to wait for an update to TWRP for MM. I think recoveries are BL dependent, and I believe the BL did in fact update with the recent upgrade to Android M.
Click to expand...
Click to collapse
What does BL stand for?
JazzieBoi said:
What does BL stand for?
Click to expand...
Click to collapse
Boot loader
SeekingSight said:
Boot loader
Click to expand...
Click to collapse
Oh Ok lol
Related
Here is TWRP for the Mediapad X2. TWRP lets you back up your stock ROM or flash custom Roms. You must already be on B112 or higher to flash this or you'll bootloop.
TWRP:
https://www.androidfilehost.com/?fid=674106145207489444
CHANGELOGS:
12-3-15: Changed over to English and added cool new Splash Screen
7-23-16: Updated to TWRP 3.0.0-2. (Android 6.0 compatible) and added a black & blue Theme and bunch of languages. You can now back up your cust in twrp as well.
9-16-17: TWRP updated to 3.1.1-0.
5-26-18: Updated to TWRP 3.2.1-0. Battery charge level now shown in status bar. You can flash OemInfo images now.
ajsmsg78 said:
Here is the latest TWRP Recovery for Android 5.1.1. TWRP lets you back up your stock ROM or flash custom ROMS.
1) You must have an unlocked bootloader to flash this. Once flashed you can root easily. You can follow my guide here:
http://forum.xda-developers.com/mediapad-x2/general/mediapad-x2-unlock-bootloader-root-guide-t3212325
2) To use. extract the files then flash the twrp_cn.img in Fastboot (fastboot flash recovery twrp_cn.img) or double click the run.bat and follow the instructions.
I am not responsible if anything happens to your device or if your house burns down This has been tested on the 703L only. Use it on other models at your own risk.
https://www.dropbox.com/s/uqbkskpz8niqyzm/X2_TWRP_CN_5.1.1_kangvip.rar?dl=0
Click to expand...
Click to collapse
This is what I was looking for.
ajsmsg78 said:
Here is the latest TWRP Recovery for Android 5.1.1. TWRP lets you back up your stock ROM or flash custom ROMS.
1) You must have an unlocked bootloader to flash this. Once flashed you can root easily. You can follow my guide here:
http://forum.xda-developers.com/mediapad-x2/general/mediapad-x2-unlock-bootloader-root-guide-t3212325
2) To use. extract the files then flash the twrp_cn.img in Fastboot (fastboot flash recovery twrp_cn.img) or double click the run.bat and follow the instructions.
I am not responsible if anything happens to your device or if your house burns down This has been tested on the 703L only. Use it on other models at your own risk.
https://www.dropbox.com/s/uqbkskpz8niqyzm/X2_TWRP_CN_5.1.1_kangvip.rar?dl=0
Click to expand...
Click to collapse
I'm on b106 stock now.... how do I get my phone into bootloader or fastboot now? Update won't let me do incremental updates either... No incremental update button to manually update to 107 and 108. Thx for any help you can give me...
Steamer2499 said:
I'm on b106 stock now.... how do I get my phone into bootloader or fastboot now? Update won't let me do incremental updates either... No incremental update button to manually update to 107 and 108. Thx for any help you can give me...
Click to expand...
Click to collapse
Put the B107 update on your sdcard in a folder called dload. Make sure you rename the B107 Update to update.zip before you do this or it won't see it. Go into settings--->Updater---->Hit Menu at the bottom and go to Local Update. It will see it and you'll be able to install it. Any incremental update that you do make sure to rename the file to update.zip. Do the same process for the B108 update.
ajsmsg78 said:
Put the B107 update on your sdcard in a folder called dload. Make sure you rename the B107 Update to update.zip before you do this or it won't see it. Go into settings--->Updater---->Hit Menu at the bottom and go to Local Update. It will see it and you'll be able to install it. Any incremental update that you do make sure to rename the file to update.zip. Do the same process for the B108 update.
Click to expand...
Click to collapse
Thx... That worked. I'm on stocked 108 now.... How do I get my phone in fastboot or bootloader mode to update to "X2_TWRP_CN_5.1.1_kangvip"? I want to install "X2-B108SP01_Kangvip". Again... Thx for all your help... Very much appreciated! Also, holding volume key down and power button at the same time does nothing...
Steamer2499 said:
Thx... That worked. I'm on stocked 108 now.... How do I get my phone in fastboot or bootloader mode to update to "X2_TWRP_CN_5.1.1_kangvip"? I want to install "X2-B108SP01_Kangvip". Again... Thx for all your help... Very much appreciated! Also, holding volume key down and power button at the same time does nothing...
Click to expand...
Click to collapse
I finally got both installed!
Steamer2499 said:
I finally got both installed!
Click to expand...
Click to collapse
Great, how's the ROM?
ajsmsg78 said:
Great, how's the ROM?
Click to expand...
Click to collapse
Running pretty good... Got some system parsing errors... Mainly Huawei pre-installed stuff errors Getting rid of some of the chinese stuff...
Update: Updated the OP with a guide on how to install TWRP.
After install, I refresh finished, not start a recovery. My Model 702L.
ajsmsg78 said:
Update: Updated the OP with a guide on how to install TWRP.
Click to expand...
Click to collapse
Why it keeps on giving me in the CMD:
'Failed Remote command not allowed'.
Is your bootloader Unlocked ?
I used to have similar error even though my bootloader state was shown as "phone unlocked". So I re-unlock the bootloader and then I managed to flash the twrp custom recovery
kpcheang2 said:
Is your bootloader Unlocked ?
I used to have similar error even though my bootloader state was shown as "phone unlocked". So I re-unlock the bootloader and then I managed to flash the twrp custom recovery
Click to expand...
Click to collapse
Yes it is, at the bootloader screen it shows the Phone Unlocked.
BTW.How to re-unblock it? In case needed.
hagba said:
Yes it is, at the bootloader screen it shows the Phone Unlocked.
BTW.How to re-unblock it? In case needed.
Click to expand...
Click to collapse
Just type in fastboot oem unlock xxxxxxxxxxx where x is your unlock code.
Yes - as "ajsmsg78" stated just reboot into bootloader mode and type in "fastboot oem unlock xxxxxxxxxxxxxxxx"
After that try to flash the trwp - it worked for me.
5.1.1 ROM on 702L
eennap said:
After install, I refresh finished, not start a recovery. My Model 702L.
Click to expand...
Click to collapse
You mean you managed to install the 5.11 ROM onto your 702L ?
kpcheang2 said:
You mean you managed to install the 5.11 ROM onto your 702L ?
Click to expand...
Click to collapse
I install TWRP 5.1.1 on my 702L.
Dont worry I fixed it now... but can you please update the link for the TWRP english theme? it seems broken.
OP updated with a working link to the TWRP English theme.
Flash 5.1.1. twrp onto 702L
eennap said:
I install TWRP 5.1.1 on my 702L.
Click to expand...
Click to collapse
May I know how you managed to flash the 5.1.1 twrp onto your 702L ?
When I did "fastboot flash recovery twrp_cn.img" and tried rebooting into recovery mode, it went into a boot loop ?
I wanted to use it to try flash the B106 703L ROM
Im still on 5.1.1 official version and my device is bootloader unlocked and twrp installed help me how to install official 6.0 version
First just flash 6.0 image through fastboot process in this twrp will be replace with stock recovery, Second flash someone's 6.0 Nandroid backup through TWRP...
Sent from my Toilet using Moto G3....
I have also same query, having xt1550 with 5.1.1 and unlocked bootloader with root access.
Also receiving OTA notification but can't install the same.
Tried to install OTA manually but could not go into recovery mode stuck on "No Command" screen.
Please guide....
beworld16 said:
I have also same query, having xt1550 with 5.1.1 and unlocked bootloader with root access.
Also receiving OTA notification but can't install the same.
Tried to install OTA manually but could not go into recovery mode stuck on "No Command" screen.
Please guide....
Click to expand...
Click to collapse
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Tel864 said:
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Click to expand...
Click to collapse
That's very much true.. Don't flash ota with TWRP with having root access..
Sent from my Moto G(Osprey)
Thanks for the reply
I have downloaded Official Firmware of 6.0 for XT1550 from here.
So Now, can i process with this using fastboot command.
If yes, will it look the bootloader ?
Tel864 said:
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Click to expand...
Click to collapse
I thought OTA's worked fine with root installed, although you often lose root in the process, it was custom recovery they burped at?
as the title says, I have a new 6045O and it went to 6.01 immediately.... how do I root now so I can load a different firmware?
jbach44 said:
as the title says, I have a new 6045O and it went to 6.01 immediately.... how do I root now so I can load a different firmware?
Click to expand...
Click to collapse
Hi.
Your bootloader has been already unlocked? Twrp installed?
If you didn't do that, do it before flashing 6.0.1, when you are in lollipop yet. Or on 6.0.1, install twrp by Alcatel flasher
When 6.0.1 installed and twrp, flash SU. Thats all
https://forum.xda-developers.com/idol-3/development/tool-sahara-firehose-test-alcatel-t3454855
jbach44 said:
as the title says, I have a new 6045O and it went to 6.01 immediately.... how do I root now so I can load a different firmware?
Click to expand...
Click to collapse
So... you went to 6.0.1 immediately. Now it need more work to flash a new firmware.
In 6.0.1 you loose fastboot commands, with no fastboot you can´t unlock bootloader.
Solution, you need to force root, i don´t now, maybe kingroot or something like that.
Then install Rashr from Google Play, find TWRP for your phone model, with Rashr, root and TWRP image you can install TWRP!
Whit TWRP, i think you can already flash a ROM, but is better to unlock the bootloader...
To get back fastboot commads you need the ABOOT image from 5.0.2 and a flash zip to flash it with TWRP.
After get back the fastboot commands you can unlock the bootloader and get a "free" phone to flash for sure.
Check this example for a ABOOT zip, you can use it by replacing the ABOOT.img from inside and the splash image for 6045 phone model ( i don´t know, maybe ABOOT is the same!!! )
https://forum.xda-developers.com/idol-3/general/6039y-how-to-recover-fastboot-commads-t3555489
With Alcatel flasher no need unlock bootloader and you can install twrp.
Mick073 said:
With Alcatel flasher no need unlock bootloader and you can install twrp.
Click to expand...
Click to collapse
Alcatel flasher? the Eluga program? or?
I'm talking about Alcatel flasher by DeckerSU
After installing TWRP & SuperSU, can any of the custom roms made for the other 6045 variants be flashed to and work correctly on the 6045O?
Just wondering because I just bought one.
Thanks in advance.
I've got my FRD-L14 (64GB US honor 8) running stable with B360 firmware (released 02-13-17) bootloader unlocked, SU flashed via TWRP.
I wanted to try the latest B385 OTA firmware flash so I used fastboot to flash my current stock B360 System.img, boot.img, and recovery.img to be sure I am running all stock boot/system files before flashing the B360 OTA.
I rebooted from fastboot successfully and continued with the OTA interface to install latest system update, it rebooted into Huawei recovery interface, verifying, installing, and then fails to verify and install.
Do I really have to lock the bootloader and wipe the entire phone in order to install latest OTA and then re-unlock bootloader, reflash twrp, and restore data ?
Thanks !
Well, that wasn't hard.
I used the "download latest full package" in the top-right menu of the OTA updates screen. This successfully installed B385 OTA update package for me without failure, while bootloader unlocked. Imagine that. I hope this helps someone else! Now, to figure out how to use magisk rather than supersu....
[remove, accidental doublepost]
I have the FRD-L04 32GB US model and im wondering why I havent had the update yet
I did revert to stock boot loader and unrooted im on 360 at the moment but no updates.
crowruin said:
I have the FRD-L04 32GB US model and im wondering why I havent had the update yet
I did revert to stock boot loader and unrooted im on 360 at the moment but no updates.
Click to expand...
Click to collapse
I just got the new update
mine26135 said:
I just got the new update
Click to expand...
Click to collapse
same here hahaha updating now.
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Hilzerak said:
Just need to flash root after every OTA.
Click to expand...
Click to collapse
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
You should you twrp by
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Try to in to recovery mode,if not,you try to flash twrp by mau.....
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Thx for the info, helps for future.
But know i rebootet.
soihuvuontrang said:
You should you twrp by
Try to in to recovery mode,if not,you try to flash twrp by mau.....
Click to expand...
Click to collapse
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
The version you tried to boot is not for android 10.
Versions for android 10 are blu_spark 9.108 and 9.109. Unfortunately, i think @eng.stk stopped providing img, but you can download lastest @mauronofrio TWRP and then flash @mauronofrio or blu_spark TWRP
Hilzerak said:
Thx for the info, helps for future.
But know i rebootet.
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Click to expand...
Click to collapse
After fashing twrp.img you boot into recovery and flash the file twrp.zip(the same series and name with file twrp.img)then reboot recovery.