root for 6045O with 6.01 running - Onetouch Idol 3 Q&A, Help & Troubleshooting

as the title says, I have a new 6045O and it went to 6.01 immediately.... how do I root now so I can load a different firmware?

jbach44 said:
as the title says, I have a new 6045O and it went to 6.01 immediately.... how do I root now so I can load a different firmware?
Click to expand...
Click to collapse
Hi.
Your bootloader has been already unlocked? Twrp installed?
If you didn't do that, do it before flashing 6.0.1, when you are in lollipop yet. Or on 6.0.1, install twrp by Alcatel flasher
When 6.0.1 installed and twrp, flash SU. Thats all
https://forum.xda-developers.com/idol-3/development/tool-sahara-firehose-test-alcatel-t3454855

jbach44 said:
as the title says, I have a new 6045O and it went to 6.01 immediately.... how do I root now so I can load a different firmware?
Click to expand...
Click to collapse
So... you went to 6.0.1 immediately. Now it need more work to flash a new firmware.
In 6.0.1 you loose fastboot commands, with no fastboot you can´t unlock bootloader.
Solution, you need to force root, i don´t now, maybe kingroot or something like that.
Then install Rashr from Google Play, find TWRP for your phone model, with Rashr, root and TWRP image you can install TWRP!
Whit TWRP, i think you can already flash a ROM, but is better to unlock the bootloader...
To get back fastboot commads you need the ABOOT image from 5.0.2 and a flash zip to flash it with TWRP.
After get back the fastboot commands you can unlock the bootloader and get a "free" phone to flash for sure.
Check this example for a ABOOT zip, you can use it by replacing the ABOOT.img from inside and the splash image for 6045 phone model ( i don´t know, maybe ABOOT is the same!!! )
https://forum.xda-developers.com/idol-3/general/6039y-how-to-recover-fastboot-commads-t3555489

With Alcatel flasher no need unlock bootloader and you can install twrp.

Mick073 said:
With Alcatel flasher no need unlock bootloader and you can install twrp.
Click to expand...
Click to collapse
Alcatel flasher? the Eluga program? or?

I'm talking about Alcatel flasher by DeckerSU

After installing TWRP & SuperSU, can any of the custom roms made for the other 6045 variants be flashed to and work correctly on the 6045O?
Just wondering because I just bought one.
Thanks in advance.

Related

[Q] simple root/upgrade question

Hi. Been out the loop for a while and struggling to find the answer to my question.
I'm on 4.4.4 no custom revovery but with root.
I have an OTA notice to go to lollipop, which should be fine, as I have stock evetything?
How do I simply get root back afer the update?
So many posts with options, I'm struggling to find the right answer.
Unlock bootloader, and then either use cf-autoroot or flash latest SuperSU BETA through twrp.
beekay201 said:
Unlock bootloader, and then either use cf-autoroot or flash latest SuperSU BETA through twrp.
Click to expand...
Click to collapse
Thanks, bootloader is already unlocked. I don't really want to install any custom recoveries, so the cf-autoroot sounds like the way to go.
Do you have a link for how to use this method?
Here you go http://autoroot.chainfire.eu/
Sent from my Nexus 5 using Tapatalk
teapea said:
Thanks, bootloader is already unlocked. I don't really want to install any custom recoveries, so the cf-autoroot sounds like the way to go.
Do you have a link for how to use this method?
Click to expand...
Click to collapse
to use a custom recovery you don't need to flash it.. just boot it.
'fastboot boot whatever_custom_recovery_you_want.img'

[Q] I just unlocked my bootloader. How do I root now?

Hi
I just unlocked my bootloader, so what do I do know for rooting?
I don't really care about my DRM keys and I unlocked, so I did not need to do all that downgrade, flash, root, update firmware again and so.
So how do I root now?
Thanks in advance
Faspaiso said:
Hi
I just unlocked my bootloader, so what do I do know for rooting?
I don't really care about my DRM keys and I unlocked, so I did not need to do all that downgrade, flash, root, update firmware again and so.
So how do I root now?
Thanks in advance
Click to expand...
Click to collapse
Find one of the kernels repacked with built-in recovery - It needs to be one that matches whatever build you've got running in /system
Flash it with fastboot
Flash the latest SuperSU flashable ZIP in recovery
Entropy512 said:
Find one of the kernels repacked with built-in recovery - It needs to be one that matches whatever build you've got running in /system
Flash it with fastboot
Flash the latest SuperSU flashable ZIP in recovery
Click to expand...
Click to collapse
Thanks, but bricked when flashing TWRP.img. In a bootloop now. Trying to get back to stock.
Xperiafirm->Stock firmware->Fastbootmode->Flashtool->Flash it
Right?

Is there a way to root on 5.1.1 23.4.A.1.200 ?

Hello there,
have been trying to root my new xperia z3 for 3 weekends now with no luck.
My bootloader has been unlocked through sony website, then relocked and unlocked many times using flashtool.
Looks like all the recoveries (doomlord, twrp) I could find work only on 4.4.4. Then I use flashtool to flash lollipop 5.1.1 23.4.A.1.200 and either wipe and loose the root or don't wipe all and enter a bootloop.
Flashing those recovery kernels straight on lollipop make the phone enter bootloop.
Are you guys able to root those Z3 under 5.1.1 ?
thank you
Sure shot easy way is flash kitkat firmware and use giefroot or flash 5.0 firmware and use kingroot.
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Thanks a lot for your answer guys.
Am unusually struggling with this device.
lol1rfs said:
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Click to expand...
Click to collapse
Have already downgraded to kitkat, installed custom recovery and rooted. But the 5.1.1 stock flash indeed wipe everything.
Haven't found yet a custom recovery for 5.1.1 that doesn't make the phone enter a bootloop. Would you happen to have a link ?
I'll give a look to that PRFcreator, didn't know about it.
Jkay7 said:
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Click to expand...
Click to collapse
This is what I read about kingroot and haven't found any other way to root a 5.1.1 stock.
Where could I find a pre-rooter ROM then ? My wish was to be stock and rooted to be able to use apps like titanium backup and adblockers. Used to try custom roms every other day on my old SGS but today I'd be happy with something that just works.
Did not make any backup before unlocking but looked like flashtool was able to relock the device. Am I right guessing I didn't loose my DRM keys then ?
Thanks again for your answers.
Edit: looks like am missing sthg, what's the point in rooting a kitkat to upgrade with a pre-rooted lollipop right after ?
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
I hope you made a TA backup before unlocking your bootloader, otherwise you have lost your DRM keys forever.
Anyway, if your bootloader is now locked, follow the guide that Licaon_Kter linked in the above post.
The exploit that lets us root our Z3 only works on Kitkat, so downgrade first, run the exploit to obtain root, and install recovery.
You will then have stock, rooted, KitKat.
To get to 5.1.1, you will then need to either create your own pre rooted firmware, or download one that someone has kindly posted on here.
If you want to learn how to do it, read this --> Create your own pre rooted firmware with PRF Creator
PRF Creator will create a zip file that can be flashed from recovery, so once you have recovery installed, it's dead easy.
That will get you where you want to be.
However . . . and there's always a however lol . . .
. . . if you still have an unlocked bootloader, it is much simpler from wherever you are.
Find any custom rom that has recovery built in, and almost all do, then fastboot the kernel only, the boot.img.
Reboot your device and enter recovery.
Install your pre rooted firmware that you have either created with PRF Creator, or downloaded from here.
Job done.
My personal advice is read, read, and then read some more.
It can be very complicated, but you'll get the hang of it.
Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I still have an unlocked bootloader since flashtool can lock and unlock it in a matter of a second.
Went back again in KK rooted with twrp recovery.
Wiped data, cache, dalvik.
Flashed D6603_23.4.A.1.232_Customized_US_SuperSU_XZDR2.8.2 1 from the link above and ... CWM recovery report install from sdcard completed after 1s and nothing more. Am still booting in KK after that.
This didn't work for me. Am losing it now with this phone.
Am I missing sthg ? Any advice ?
Can't use PRFCreator, am under mac os...
Thanks to all for your help
Try with TWRP too
Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
Licaon_Kter said:
Try with TWRP too
Click to expand...
Click to collapse
tried twrp found there http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
phone is not booting anymore.
twrp post says it doesn't work on stock room.
---------- Post added at 02:16 PM ---------- Previous post was at 02:05 PM ----------
Is there really anyone out there with a rooted stock lollipop ?
or you are all using customs ?
am seriously questionning the thing now
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Licaon_Kter said:
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I just can't, I don't have access to a window machine
Both giefroot and FlashTool are for Win/Mac/Linux.
Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
I appreciate your still trying to help me.
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
I have read thoroughly and downloaded pre-rooted lollipop stock roms from the link you provided.
Once under KK, rooted, with all settings set properly (debug, security, etc...), and all caches/dalvik/data wiped, the CMW recovery just don't flash those lollipop roms. After just one sec, it says install completed but then the device still boot under KK.
TWRP doesn't even intall, so am wondering if this is even possible to get a TWRP on stock rom.
Have tried all of those with bootloader unlocked and locked, or a mix like unlocked first to be able to root a KK, then relock to flash a stock prerooted 5.1.1 (as stated in the post) but then I get a device that doesn't even boot.
Tried dualrecovery too, flash the zip, and nothing.
I suspect all of you guys have used some sort of .bat windows utility to get through this.
Once again, thanks for your help and patience.
ikho said:
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
Click to expand...
Click to collapse
The point is to go from the BEGINing _again_: Flash stock KK, giefroot, XZ, pre-rooted LP
I have done it in Linux w/ locked bootloader and stock ROM, hence my pointers.
XZDualrecovery has TWRP 2.8.7.0. But, do take note that you use Volume Down to enter PhilzTouch Recovery and Volume Up to enter TWRP.
Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
am sorry, can't find how to use giefroot on a mac.
read quite a few post of people saying that was not working for them.
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Licaon_Kter said:
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Click to expand...
Click to collapse
yaaay, houray it finally worked
big thanks man, you saved me $500 on that one !

(help) how to install official 6.0 using twrp on moto g3

Im still on 5.1.1 official version and my device is bootloader unlocked and twrp installed help me how to install official 6.0 version
First just flash 6.0 image through fastboot process in this twrp will be replace with stock recovery, Second flash someone's 6.0 Nandroid backup through TWRP...
Sent from my Toilet using Moto G3....
I have also same query, having xt1550 with 5.1.1 and unlocked bootloader with root access.
Also receiving OTA notification but can't install the same.
Tried to install OTA manually but could not go into recovery mode stuck on "No Command" screen.
Please guide....
beworld16 said:
I have also same query, having xt1550 with 5.1.1 and unlocked bootloader with root access.
Also receiving OTA notification but can't install the same.
Tried to install OTA manually but could not go into recovery mode stuck on "No Command" screen.
Please guide....
Click to expand...
Click to collapse
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Tel864 said:
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Click to expand...
Click to collapse
That's very much true.. Don't flash ota with TWRP with having root access..
Sent from my Moto G(Osprey)
Thanks for the reply
I have downloaded Official Firmware of 6.0 for XT1550 from here.
So Now, can i process with this using fastboot command.
If yes, will it look the bootloader ?
Tel864 said:
You can't flash OTA with root. You can look at the other thread on factory firmware and flash a Marshmallow factory image if one is available for your model. That is safer than flashing an OTA anyway.
Click to expand...
Click to collapse
I thought OTA's worked fine with root installed, although you often lose root in the process, it was custom recovery they burped at?

How to root 6.0.1

Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
wiwild said:
Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
Click to expand...
Click to collapse
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Alek Dev said:
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Click to expand...
Click to collapse
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Can i install twrp to flash thid or stock is fine?
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
yash_rathore25 said:
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
Click to expand...
Click to collapse
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
dongarritas said:
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
Click to expand...
Click to collapse
For me it got downloaded but showing device either offline or unauthorized
I'd run a full virus /malware scan.... I use 360 Security on mobile devices and PC's. It, along with SUPERAntiSpyware has served me well.
Sent from my LG-H631 using Tapatalk
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
famewolf said:
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
Click to expand...
Click to collapse
Bro,
They also on locked bootloader with no fastboot commands working like me.
yash_rathore25 said:
Bro,
They also on locked bootloader with no fastboot commands working like me.
Click to expand...
Click to collapse
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
famewolf said:
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
Click to expand...
Click to collapse
I am waiting some days otherwise i will downgrade
BTW my device is recognized in fastboot but commands not working. It means fastboot is working but commands have been changed
dongarritas said:
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Click to expand...
Click to collapse
The root install it with TWRP !
Alek Dev said:
The root install it with TWRP !
Click to expand...
Click to collapse
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
dongarritas said:
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
Click to expand...
Click to collapse
You must go back to 5.0 to install and then update it because in 6.0.1 update Removes Fastboot commands so you can't install it twrp....
I have a problem with rooting 6039Y on rom 6.0.1 by persona78. Stock rom 5.0.2 and root working fine. When i flash via TWRP after the update to MM i get this message:
-Cheking patch status
---Already patched, attempting to find stock backup
---Stock restore failed, attempting ramdisk restore
---Ramdisk restore failed, aborting
This solution - echo SYSTEMLESS=true >> /data/.supersu - not working.
Phone was simlock removed via furiousgold, maybe this is a problem?
Alcatel one touch idol 3 (5.5) 6045Y
i have this model Alcatel one touch idol 3 (5.5) 6045Y
full unlocked with unlocked bootloader and sim free (single sim model) with 6.0.1 from alcatel not updated to 6.0.1 already i got with 6.0.1 from alcatel (i know you will say "but that phone has 5.0 and updated to 6.0.1 trough a phone update online" But it is not updated ,phone came directly from factory and how i can root this device if there is any help.
Still no solution to rooting stock MM 6045I?
Hope this helps someone
I know this thread is dead, but replying so people can find the information easier.
I used this guide to flash twrp then used twrp to root on stock 6045O 6.0.1.

Categories

Resources