My Galaxy note 10.1 bricked itself all I did was downloading cyanogenmod at night and when I wake up It was bricked.
When I go to Recovery it says 'e: cant open /cache/recovery/log' when I try to install zip from sdcard it says
"E: cant mount sdcard and restarts itself . I spent almost all day here at xda but couldnt fix.
:crying::crying::crying::crying:
Please Help I tried flashing a new recovery ( TWRP over CWM) but didn't work it went back to cwm .
I have no external SD card.
Why no try flash a stock rom?
mrlucaszarate said:
Why no try flash a stock rom?
Click to expand...
Click to collapse
I don't know what the problem is I flashed the stock rom using odin and without interuption it flashed but still in bootloop
when i went to recovery CWM was not removed . CWM gives errors like e: cant open ......... and e: cant mount sdcard and all that .
What should I do??
I Installed stock ROM using different versions of odin but also cwm is not removed and im still in bootloop .
Any idea what is happening here . I think cwm has to do something with the bootloop :crying:
ODIN LOG
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Do You try wipe data and data cache after flashing?
Related
I have an old 8013 Note 10.1 that I let my kids use, it's had CM on it forever and no issues until recently. Now it boots up to the CM bootscreen but doesn't go any further. I've booted to TWRP and tried to format and install a new ROM but it doesn't seem to even format. When I go to load a new ROM it always shows that the internal storage is the same free space (something like 513Mb). I've tried flashing PhilzTouch, TWRP, CWM, and when I reboot to recover it's still the same version of TWRP I started with. Tried flashing a stock ROM, still boots to the CM Logo. Loaded ODIN on my computer and tried flashing a stock image using ODIN and it shows it's successful, but nothing changes on the tablet. I even tried the instructions listed in this post, which should reformat everything and still - same issue.
I've attached a few screenshots of the kinds of errors and messages I get in TWRP when I try to format, do an advanced wipe of everything and still a new ROM. Any suggestions would be great! I'm ready to give up on this thing, but I still have a sliver of hope.
Re install your oriGinal frimware
Sent from my SM-J700F using Tapatalk
saismarty said:
Re install your oriGinal frimware
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
As I think I mentioned, I've tried. Just to be clear I've added some screenshots and output from ODIN.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCOI1_N8013XARCOI1_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Looks like everything is flashing just fine... until I reboot the tablet and get the CM Boot logo again and the tablet just gets stuck there...
What happened next
Sent from my SM-J700F using Tapatalk
saismarty said:
What happened next
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
Cyanogenmod boot animation and just stuck there... just like ODIN never happened.
Try doing Odin but check Nand erase all, if you know what that does it should wipe what's holding your tablet back and then flash stock firmware, just hope it works, I don't know anything else really
Hello,
My tablet was working fine, but the other day when I turned it on this happens. I can at least turn it off when connected to the charger.
It will not boot into recovery. I just get the android on his back with red triangle and No Command.
I can boot into Odin download. So I am trying to install CF-Auto-Root as a precursor to installing CWM Recovery to see if I can boot into that recovery. I have downloaded and installed Odin, and downloaded N8010 version of CF-Auto-Root (CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010).
Using Odin to install this .tar file seems to work (I get Pass), but auto reboot, or manual reboot into recovery is still the same. Isn't booting into CF-Auto-Root. This is the Odin log;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Is it supposed to look like this?
Any ideas what I may be doing wrong, or anything I can try?
Thank you.
niloc32 said:
Hello,
My tablet was working fine, but the other day when I turned it on this happens. I can at least turn it off when connected to the charger.
It will not boot into recovery. I just get the android on his back with red triangle and No Command.
I can boot into Odin download. So I am trying to install CF-Auto-Root as a precursor to installing CWM Recovery to see if I can boot into that recovery. I have downloaded and installed Odin, and downloaded N8010 version of CF-Auto-Root (CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010).
Using Odin to install this .tar file seems to work (I get Pass), but auto reboot, or manual reboot into recovery is still the same. Isn't booting into CF-Auto-Root. This is the Odin log;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Is it supposed to look like this?
Any ideas what I may be doing wrong, or anything I can try?
Thank you.
Click to expand...
Click to collapse
i have same problem with an italian gt-n8010 -.... finally you find fix ???
That post was four years ago , poster not seen since .
Usual is search answers well posted , depends upon exact error message .
Hi!
I've just bought an S7 and I was trying to root it.
I've read many guides, and all of them drive me to Odin.
But every file I've tryied to upload (TWRP and CF-auto-root) fail at the end.
That's the TWRP's log:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And that's the CF's log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-herolte-heroltexx-smg930f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tryed with auto Reboot on and off for both of them, but it always gone wrong.
What should I try?
If you have the US version of the S7, you can't use CF Auto Root. Bootloader is locked. Which also means no TWRP or any custom recovery.
My bad: I didn't check on unlock the OEM on the developer's options.
But I still have some trouble!
TWRP says PASS, but as soon as I let it start with VOL UP+HOME+POWER I have a blue screen with android logo that says "Updating..." than "No command" and than I'm in recovery mode.
Ok, another step over, another trouble. Now I can go (I don't know why the third times I tryed it worked...) and now I can finally go in the TWRP. But I have no file at all.
When I'm going to install to select storage it says "Internal storage (0MB)", like the other (I have no SD card).
If I go to make a Factory reset it says
Could not mount /data and unable to find crypto footer.
Fail to mount '/data' (invalid argument)
Unable to recreate /data/media folder.
And so on...
So I'm stucked again, and every time it seems go worse.
Jengirl said:
Ok, another step over, another trouble. Now I can go (I don't know why the third times I tryed it worked...) and now I can finally go in the TWRP. But I have no file at all.
When I'm going to install to select storage it says "Internal storage (0MB)", like the other (I have no SD card).
If I go to make a Factory reset it says
Could not mount /data and unable to find crypto footer.
Fail to mount '/data' (invalid argument)
Unable to recreate /data/media folder.
And so on...
So I'm stucked again, and every time it seems go worse.
Click to expand...
Click to collapse
Please see my previous reply.
No, that's european version, TWRP is installed.
Solved with TWRP, Wipe->Format Data.
But I still got some error's installing Magisk...
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
J700P
tjjc4 said:
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
Click to expand...
Click to collapse
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
peter couniaz said:
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
Click to expand...
Click to collapse
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
J700P
tjjc4 said:
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
Click to expand...
Click to collapse
It all or nothing on this if you can get into recovery factory reset then wipe system an go into download mod an try Odin one last time ! But before all that make shore debugging is on an make shore you are using a Samsung usb cord best the one that came with the phone ! An use Odin 3.12.5 or older 3.13.01 doesn't work right for that phone !!! PS make the firmware file isn't mest up ! Get the latest firmware file !
This happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5457 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone is A8 sm-a530f
Usb drivers are installed
I was able to flash twrp on my device but after that my phone got stuck into a boot loop. I tried to flash the original firmware it didn't work and my phone got stuck into boot animation and can only boot into odin download mode
>Kalde< said:
This happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5457 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone is A8 sm-a530f
Usb drivers are installed
I was able to flash twrp on my device but after that my phone got stuck into a boot loop. I tried to flash the original firmware it didn't work and my phone got stuck into boot animation and can only boot into odin download mode
Click to expand...
Click to collapse
When you flash twrp when twrp boots up you do a reformat.
mchlbenner said:
When you flash twrp when twrp boots up you do a reformat.
Click to expand...
Click to collapse
Tried Didn't work:crying:
After flashin twrp again and going to Wipe -> Format data it didn't do anything
>Kalde< said:
Tried Didn't work:crying:
After flashin twrp again and going to Wipe -> Format data it didn't do anything
Click to expand...
Click to collapse
Make sure your using the right twrp.
mchlbenner said:
Make sure your using the right twrp.
Click to expand...
Click to collapse
Newest?
>Kalde< said:
Newest?
Click to expand...
Click to collapse
What are you on example Oreo you to flash rmm.
If you on 9 you need to flash magisk.