Hi!
I've just bought an S7 and I was trying to root it.
I've read many guides, and all of them drive me to Odin.
But every file I've tryied to upload (TWRP and CF-auto-root) fail at the end.
That's the TWRP's log:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And that's the CF's log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-herolte-heroltexx-smg930f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tryed with auto Reboot on and off for both of them, but it always gone wrong.
What should I try?
If you have the US version of the S7, you can't use CF Auto Root. Bootloader is locked. Which also means no TWRP or any custom recovery.
My bad: I didn't check on unlock the OEM on the developer's options.
But I still have some trouble!
TWRP says PASS, but as soon as I let it start with VOL UP+HOME+POWER I have a blue screen with android logo that says "Updating..." than "No command" and than I'm in recovery mode.
Ok, another step over, another trouble. Now I can go (I don't know why the third times I tryed it worked...) and now I can finally go in the TWRP. But I have no file at all.
When I'm going to install to select storage it says "Internal storage (0MB)", like the other (I have no SD card).
If I go to make a Factory reset it says
Could not mount /data and unable to find crypto footer.
Fail to mount '/data' (invalid argument)
Unable to recreate /data/media folder.
And so on...
So I'm stucked again, and every time it seems go worse.
Jengirl said:
Ok, another step over, another trouble. Now I can go (I don't know why the third times I tryed it worked...) and now I can finally go in the TWRP. But I have no file at all.
When I'm going to install to select storage it says "Internal storage (0MB)", like the other (I have no SD card).
If I go to make a Factory reset it says
Could not mount /data and unable to find crypto footer.
Fail to mount '/data' (invalid argument)
Unable to recreate /data/media folder.
And so on...
So I'm stucked again, and every time it seems go worse.
Click to expand...
Click to collapse
Please see my previous reply.
No, that's european version, TWRP is installed.
Solved with TWRP, Wipe->Format Data.
But I still got some error's installing Magisk...
Related
Briefly here is my problem:
I tried to add capacitative keys on my S5, so edited the build.prop in system file by adding the following line on the end
"qemu.hw.mainkeys=0"
it all work previously with my s3 and s4, so I did it without making any back up.
when I restarted the phone, it is showing the following error: "Unfortunately, the process com.android.systemui has stopped"
and the phone becomes unresponsive.
I panicked, so I boot into recovery mode and did a "wipe cache partition" and "wipe data/factory reset". When I reboot the system, it is still showing the following error: "Unfortunately, the process com.android.systemui has stopped" and the phone becomes unresponsive.
So I tried to flash stock firmware using Odin, but is showing the following error:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I don't know what to do, any help? please?
Please re-post in the Q&A thread: http://forum.xda-developers.com/sprint-galaxy-s5/help
My Galaxy note 10.1 bricked itself all I did was downloading cyanogenmod at night and when I wake up It was bricked.
When I go to Recovery it says 'e: cant open /cache/recovery/log' when I try to install zip from sdcard it says
"E: cant mount sdcard and restarts itself . I spent almost all day here at xda but couldnt fix.
:crying::crying::crying::crying:
Please Help I tried flashing a new recovery ( TWRP over CWM) but didn't work it went back to cwm .
I have no external SD card.
Why no try flash a stock rom?
mrlucaszarate said:
Why no try flash a stock rom?
Click to expand...
Click to collapse
I don't know what the problem is I flashed the stock rom using odin and without interuption it flashed but still in bootloop
when i went to recovery CWM was not removed . CWM gives errors like e: cant open ......... and e: cant mount sdcard and all that .
What should I do??
I Installed stock ROM using different versions of odin but also cwm is not removed and im still in bootloop .
Any idea what is happening here . I think cwm has to do something with the bootloop :crying:
ODIN LOG
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Do You try wipe data and data cache after flashing?
Hey guys, so my phone has been going in to boot loops. I would put it in recovery mode and clear the cache partition, that would get it to stop sometimes. Finally I did a factory reset. Now when its trying to set up my phone, it boot loops in the middle of that. So I used ODIN and tried to reinstall the firmware (OJ7), which was successful, but I'm back to boot loops during the phone set up process. Any ideas what to do next?
VanillaNasty said:
Hey guys, so my phone has been going in to boot loops. I would put it in recovery mode and clear the cache partition, that would get it to stop sometimes. Finally I did a factory reset. Now when its trying to set up my phone, it boot loops in the middle of that. So I used ODIN and tried to reinstall the firmware (OJ7), which was successful, but I'm back to boot loops during the phone set up process. Any ideas what to do next?
Click to expand...
Click to collapse
Have you did any modifications?
I installed an app on my phone that works in collaboration with a game. The app requires the phone to be rooted, but after researching the process to root a phone and the risk of voided Knox on 5.1.1 I decided against it and uninstalled the app. Its possible the app may have done something. But besides that there has not been any mods installed on my phone.
What causes the constant rebooting? Do I possibly have corrupted files that can be replaced with the recovery system? Any ideas would be helpful.
Is your bootloader unlocked?
Soooperstar said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
I am not sure. Can I check that from the recovery mode or download mode screen?
VanillaNasty said:
I am not sure. Can I check that from the recovery mode or download mode screen?
Click to expand...
Click to collapse
Don't think so. Have you tried to Odin Ol1?
Soooperstar said:
Don't think so. Have you tried to Odin Ol1?
Click to expand...
Click to collapse
Just got that on the Ol1 ODIN attempt.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU3BOI1_G925PSPT3BOI1_G925PVPU3BOI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Edit: Since that failed, my phone will now only go into download mode. It says "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." But Smart Switch is now saying I don't have an supported device.
VanillaNasty said:
Just got that on the Ol1 ODIN attempt.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU3BOI1_G925PSPT3BOI1_G925PVPU3BOI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Edit: Since that failed, my phone will now only go into download mode. It says "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." But Smart Switch is now saying I don't have an supported device.
Click to expand...
Click to collapse
Can you Odin previous firmware?
Soooperstar said:
Can you Odin previous firmware?
Click to expand...
Click to collapse
Soooperstar, I appreciate you taking the time to try to help me. I took the phone to the Samsung vendor. She worked on it for 2 hours and couldn't get it to stop going into boot loops. Its being shipped to Samsung now so they can fix it.
Thanks again.
Hello, I have serious problem can't flash any rom via odin 3.10.7 I tried yesterday and flash G920FXXU3COI9_G920FOXX3COI6_XEO
Today I tried install BTU and odin giving me sth like that. Cant update any new oryginal rom... Softbricked
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can't update vie SmartShare - device unknown.
Please help!
First a question since I am not very familiar with models, is the device G900F or G 920F, because fw is for 920 and title says 900.
Put phone in download mode:
Vol down+Home+Power button
then Vol Up to confirm Download mode after entrering dl mode.
In Smart Switch go to more, and choose Initialization from drop down menu, type model e.g. SM-G900F, s/n from back of the phone, and wait till it finishes download and flashing.
Then try flash TWRP and rom through Odin.
Hope that helps.
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
J700P
tjjc4 said:
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
Click to expand...
Click to collapse
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
peter couniaz said:
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
Click to expand...
Click to collapse
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
J700P
tjjc4 said:
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
Click to expand...
Click to collapse
It all or nothing on this if you can get into recovery factory reset then wipe system an go into download mod an try Odin one last time ! But before all that make shore debugging is on an make shore you are using a Samsung usb cord best the one that came with the phone ! An use Odin 3.12.5 or older 3.13.01 doesn't work right for that phone !!! PS make the firmware file isn't mest up ! Get the latest firmware file !