Hi guys, i have two G860p and tried to unlock them for using in New Zealand
Both of them running android 5.0 and i used the idoneapps to unlock it
For the FIRST one, the phone got signal, can send text, use 3G data, make phone call BUT ONLY UNABLE TO RECEIVE phone call. There is always an error of "Unfortunately the process com.android.phone has stopped" when other people call me. I did factory reset and used the another unlock method - bring back to 4.4.4 and unlock by SU.apk (http://forum.xda-developers.com/spr...sim-unlocking-sprint-galaxy-s5-g900p-t3085624) but it still has the same issue. After that i dialed ##72786## to bring the phone back to original setting to find another solution. One day after that, i realize that i didn't enable the GCF after unlock the phone and tried to do it immediately with the hope that it will solve my issue. Unfortunately, the issue still happen and i also have a new trouble with handset free activation.
Interestingly, for the second one, i just need to enable GCF after using the idone apps and it works perfectly. In fact, it has no issue with receiving phone call like the first one.
So, anybody understand what happen with my first phone after dial ##72786##, how can i get rid of handset free activation and unlock my phone like the second one. In fact, i have tried to flash the orginal room, factory reset, etc, but the handset free activation still appear and unable to receiving phone call after unlock as well.
oh, another information is my first phone has clean ESN and is not blacklisted
Related
Every time I switch roms i have to dial the #3282 to activate the phone. It starts everything back except the phone...when you dial out you get a message could not authenticate and sends you to verizon. On my vogue i changed roms about twice a month never had a problem. Is there a fix for this or everytime time i flash a new rom i have to call verizon for them to reactivate my phone service??
I've tried researching this with no sucess.
Thanks, Eric
Hello all, I have a samsung galaxy s4 model # i377m that was locked to bell. I purchased a unlock code for the phone and used a Kooko-(telus) sim card to enter the code. The code was successful however when I put my bell sim card back in the phone I can't send or receive phone calls properly. The dialer app opens and I can see my call history and browse my contacts but when I go to place a call the phone goes buggy, it will place the call but my screen goes black and I can't hear or be heard on the receiving end. It's really weird because everything else on the phone works, I have full reception and have the ability to send and receive txt and use data. The phone has a custom rom Cyanogenmod 12. I thought the rom had something to do with it so I downloaded and installed the stock firmware and I still had the same problem. At this point I have put cm12 back on the phone and must wait until someone can help me. I'm really lost for words.
Thanks for taking the time out of you're day to help me
Hi
Thanks for writing to us at XDA Assist. Have you tried inserting a different SIM into the device?
I don't know where else to turn but i would hope someone in here can help me resolve this since support at Freedompop is well no support at Freedompop. Here is my issue , first i think the phone is awesome I love it, I can make and receive calls with no problems . When i send a text message from another phone my FP phone wont receive it, when i try to send a text MSG to my other phone it leaves the FP phone but is never received from the other phone. i have been on the phone with NO support at least 6 times with no fix. We have done a hard boot, install/uninstall/install FP messaging app with no difference . When i got phone in may it worked, the only thing that changed was i changed the phone number on the phone. Yes i have done PRL updates etc! I also have the MSL reset code but it says to enter ##786# and hit reset , well when entering the ##786# the phone does NOTHING , so im at a loss for any fix unless someone here can help me, and that would be GREAT!!!
Hi all,
I wanted to create a dedicated thread to what have been scatteredly reported by other users in various generic threads when unlocking the Kyocera Brigadier. Mine is rooted (4.4.2, software version 1.102VZ, Kernel 3.4.0-g42c25d8, Build #KOTH49H) with a T-Mobile plan. The original carrier for the device was Verizon. I applied that trick to unlock APN settings. It worked pretty well (I've used kingroot instead of debloater). The Data (4G LTE) is now blazing fast and I can receive call and text messages. However, I can't make outgoing call/text. Below are some details:
Outgoing call: The phone application continuously indicates "CALLING..." but it is stuck there. If this is the first call after a reboot I also have the message "Error while searching for network". Then, I try to tap the "End Call" button but that do not close the phone app. The only way to unfreeze the app is to wait for an incoming call. About 1 restart out of 10 gives the error message "Unfortunately the process com.android.phone has stopped".
Outgoing text message: I systematically get the Error "Cause Code 0"
A factory reset do not solve the issue.
I would be very gratefull if a pro could help.
Not getting a lot of help on this, eh? I have the same problem with mine, I wish I had done more research before I bought the phone. I guess all I can do now is put the paperweight back in the box until either someone makes a rom for it or i figure out how to do it.
is your 4g lte is t-mobile's or else? what band is t-mobile's 4g?
did you try 3g or global and tested call/sms?
im outside usa my local sim is working on 3g out/coming calls and sms are fine but no 4g yet....
i hope someone will help you
I am on the Rogers network in Ontario, Canada. Wireless internet works perfectly, I get 4g, and can receive calls and texts, but I am unable to send either. Rogers was no help, they said it was a software issue. Downloading different phone and texting apps did nothing. The bloody wireless companies locking phones down is a complete pain in the ass.
grimy55 said:
Hi all,
I wanted to create a dedicated thread to what have been scatteredly reported by other users in various generic threads when unlocking the Kyocera Brigadier. Mine is rooted (4.4.2, software version 1.102VZ, Kernel 3.4.0-g42c25d8, Build #KOTH49H) with a T-Mobile plan. The original carrier for the device was Verizon. I applied that trick to unlock APN settings. It worked pretty well (I've used kingroot instead of debloater). The Data (4G LTE) is now blazing fast and I can receive call and text messages. However, I can't make outgoing call/text. Below are some details:
Outgoing call: The phone application continuously indicates "CALLING..." but it is stuck there. If this is the first call after a reboot I also have the message "Error while searching for network". Then, I try to tap the "End Call" button but that do not close the phone app. The only way to unfreeze the app is to wait for an incoming call. About 1 restart out of 10 gives the error message "Unfortunately the process com.android.phone has stopped".
Outgoing text message: I systematically get the Error "Cause Code 0"
A factory reset do not solve the issue.
I would be very gratefull if a pro could help.
Click to expand...
Click to collapse
mine only got 3g from celcom malaysia prepaid,but can use all that feature,only need to unlock that 4g,tried many method but still cant do 4g
Problems Handling Phone Calls (Call Waiting, 3 way, etc.) Verizon S5 on AT&T Network
recently bought a used Verizon Galaxy S5 (SM-G900V). It came with the lollipop OS. My service provider is H2O wireless (on the AT&T Network. From the outset, I had problems with phone calls, text messaging.
1. When I'm in a call, I'm not able to dial (Like to enter numbers for automated systems).
*I solved this one by going to:
settings>applications>call>
Scroll down to DTMF tones and change setting to long.
2. When I'm in a call, I'm not able to click over to calls on call waiting. When I do try to click over, I still hear the original call for a few seconds and then both calls drop and I get an error message that says "no sim or invalid sim". If I don't answer the call, both calls drop and I get the same message. The same thing happens if a try to make a 3 way call.
3. If someone calls me and I try to call them back, the call redirects to turn it into an international call and the call doesn't go through.
*I solved this using an app called prefixer
4. If I try to text message someone who called me, I get an error message back saying the phone number is invalid.
I figured I would have to root my phone to be able to make some custom changes. I first had to downgrade to kitkat (android 4.4.2) and root it and then upgrade with root using some very helpful posts and resources found on this site (thanks). When I downgraded, problems 1 and 2 went away (for number 1, I had to change my network mode, but that solution didn't work when I went back to lollipop). After upgrading beack to lollipop, all of these problems were there, though I was able to resolve 2 of them, the other 2 are problematic.
I think theres a problem with the way the phone is handling the AT&T network signal since they have a different type of network from verizon but i don't know.
I'm will in try to install a custom ROM, change settings in service mode, etc. I just haven't come accross any info to point me towards the right instructions. Alternatively, I may trade or sell this phone ant get an AT&T based phone. What do you suggest?