Hello,
i did a dirty flash of a cyanogenmod 13 nightly (build 13.0-20151213) and I am facing problems with the screen lock not working correctly. Everything else works fine.
I think there was an issue migrating my profiles from cm 12.1 11/03: On the first boot, I was presented with a black screen and the only thing visible was the status bar and the back button at the bottom.
I could not enter the settings by pulling the status bar down, but I was able to interact with the tiles.
I had a tile to edit my profiles back in cm 12.1 and as it was also visible in cm 13 after updating, I used it to switch to a profile where screen lock is turned on.
I rebooted and was able to see the lockscreen, log in and everything was working well. Except for the profiles.
When I edit the profiles in the system settings, the option "lock screen mode" is grayed out and says "this profile option is disabled by a device administrator policy".
However, I am able to switch to my (old) profiles without any problem after the device booted and everything works as it should. Including that the lock is enabled with one profile and disabled with another. I can also add the "Lock Screen"-Tile and activate/deactivate it to enable/disable the screen lock.
But unfortunately, the problem comes back when I reboot: When my active profile does turn the lockscreen off and I reboot, I get the same error as stated above. This is solvable by switching to a profile (using the tiles again) which does lock the screen and rebooting again afterwards... This lets me use the device regularly again (switching profiles etc).
However, when I have the "Lock Screen"-Tile deactivated, the Status Bar becomes completely irresponsive after a reboot. The device boots normally into the home screen with all my apps and widgets visible. I can use any app normally. I just cannot pull down the notification bar. I did not find any workarounts for this yet. However, with another dirty flash of the rom, the behavior goes back to normal (normal means: profile locking the screen is active -> reboot -> black screen).
I already did a clean flash of cm13 some time ago (the profile stuff did work correctly there), but after setting up my profiles like I want them to be, and (dirty) flashing a new nightly of cm13, I got the same bug as explained above..
Another funny thing I noticed: When I am in the situation where I have the black screen after the reboot, all my apps seem to run normally in the background. I just cannot see them. I realized that because I get notifications from my apps (e.g. mails or messages when they arrive).
Does anybody have an idea of how I could fix this problem? Or am I supposed to do a clean flash on every cm 13 update? I always updated with a dirty flash on cm 12.1 and I never broke something with that behavior :angel:
tl;dr : dirty cm 13 flash over cm 12.1 on peregrine xt1039 -> serious problems with profiles.
Posting my question here because I have no permission to reply on the developer forum.
I clean flashed cm 13 build 12/14 now, because I was not able to find another solution yet. Screen locking works perfectly for now.
I hope that dirty flashing 12/15 does not bring that bug back.. when it does, I will post here again
Otherwise: This may just have been a strange error at the early stages of cm 13 when I first got the screen lock problem after a clean flash (and dirty update afterwards).
Fingers Crossed! :fingers-crossed:
EDIT: I really do not know why this did not happen on the first reboot, but it seems like that the problem still persists. Even after a CLEAN flash of cm 13 12/14! After the first boot, I checked the "lock screen mode" in my profile settings and it was NOT grayed out. Now, after the second reboot, it is grayed out again (and the corresponding bugs appear) saying "this profile option is disabled by a device administrator policy". :crying:
EDIT 2: Just checked whether I can disable the screen lock regularly by disabling it in Settings -> Lock Screen. This actually works But I want to use my profiles :crying: ..
Clearing credentials did not help, I do not have any administrator apps running (well.. at least I cannot see any but the Android Device Manager in Settings -> Security, and this one's disabled) and I also have no VPN configuration saved on my device.
Hi,
I had the same issue, but on Lollipop. What helped was Settings->Security->Uncheck "Device policy override". Good luck
Ya this works for me too. Found the solutions myself before reaching this post. I'm on CM 13.0 Marshmallow.
cheeleongzz said:
Ya this works for me too. Found the solutions myself before reaching this post. I'm on CM 13.0 Marshmallow.
Click to expand...
Click to collapse
I don't know whether this works because Settings->Security->Uncheck "Device policy override" does not exist in any of my installations of CM 13 (or I am too dumb to find it ). But it is good to hear that this worked for you.
I did struggle about a month or so and always flashed the daily updates. At some point after I accidentally rebooted my phone while my normal profile was active, rebooting just worked fine. I don't know whether this is caused by the updates or whether I triggered anything in the settings which did help.
But however, this issue seems to have gone :laugh: At least on my device / installation..
DeKiesel said:
Hi,
I had the same issue, but on Lollipop. What helped was Settings->Security->Uncheck "Device policy override". Good luck
Click to expand...
Click to collapse
Same issue here on both CM and stock, but like the previous poster I can't find the setting. Could you post a screenshot of the page you've referred to?
[email protected] said:
Same issue here on both CM and stock, but like the previous poster I can't find the setting. Could you post a screenshot of the page you've referred to?
Click to expand...
Click to collapse
Sure, here is the screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DeKiesel said:
Sure, here is the screenshot:
Click to expand...
Click to collapse
Thanks for the screenshot.
However, I went back to the stock ROM a few months back and it doesn't have the device policy override setting.
I'll give the latest CM another shot in a couple of weeks, and post a reply then.
Related
Hi there.
I am experiencing some unexplained behaviour of my phone. When I call someone (outgoing call) the screen sometimes goes immediately off and I can't seem to wake it up. No matter what button I press (home, volume, search, power, down...) only back light of the buttons lights When this happens (not all the time) I have two options: either I take the battery out or I use another phone and call my number and phone screen wakes up.
I've noticed that this started after I've installed Sipdroid At least so I thought. So I've removed Sipdorid but behavior is the same. Untill that point I was using mik_os I went to #cyanogenmod and they suggested me to install a new ROM. If i still had the problem I should ask here on xda forums. So I've installed official cyanogenmod - stable rom (CM 7) with latest gapps. After installation I had to flash old baseband version since I under about phone there was no Broadband info and I had no service. After installation of baseband version I was able to get service but I'm still confronting problems when outgoing calls sometimes.
Video of outgoing call and screen turning off.
Do you need me to post complete logcat after screen turns off?
Enable option 'always use proximity' in Call settings
Sent from my Ainovo Flame (Nexus 7) using Tapatalk 2
myawan$ Enable option 'always use proximity' in Call settings
Thank you for your suggestion.
I did enable it but it didn't help. Note that when I call someone screen is completely off and when call is going and I try to press some buttons no back light is present.
i had a kind of similar problem..not after call but when i used to lock my device and then press any button, screen was like not coming seemed like it didn't waked but soon i realized it was brightness problem kind of when i set brightness more than dim i had no problem..
Use a custom kernel not based on the cm kernel
Eg. ta-kernel 1.1 (my personal favourite)
I also have this bug in all cm based kernels.
Sent from my LG-P500 using xda app-developers app
Free.rockstar$ i had a kind of similar problem..not after call but when i used to lock my device and then press any button, screen was like not coming seemed like it didn't waked but soon i realized it was brightness problem kind of when i set brightness more than dim i had no problem..
Yeah this is not the same problem I guess. I used highest brightness and problem is still there.
akashgupta222$ Use a custom kernel not based on the cm kernel Eg. ta-kernel 1.1 (my personal favourite) I also have this bug in all cm based kernels.
I will try your suggestion. But just to make it sure I recorded the video so you guys can see what I'm exactly talking about. Also isn't this odd that when using mik_os kernel (I don't if it is even CM based or not) this started to be a problem after one year? Is it possible that my microSD card is corrupt, that I should repartition it or anything like this?
Video
Thank you Free.rockstar and akashgupta222 for your suggestions.
EDIT: I partitioned SD card (2GB capacity): 512 MB ext, 0 MB swap problem is still there. I'm going to install ta-kernel 1.1 as akashgupta222 suggested and see what happens.
akashgupta222$ Eg. ta-kernel 1.1 (my personal favourite)
I feel so newbiesh atm. I've installed Gingersnap 2.3 rom because I saw Candied-kernel v2.5.6 ta vsync xz
But then I went to read about Candied kernel and I saw that it is based upon cyanogenmod kernel :|
akashgupta222, can you please provide me link to the ta kernel? Or any kernels that has worked for you and you didn't get black screen? Also can you provide me the rom that you used with tose kernels?
I'd be much grateful if you do so.
==================
====== UPDATE ====
==================
So I've been trying different .35 kernels from this list:
- franco.Kernel for Gingerbread (downloaded franco.Kernel-4.zip) I didn't find any other version then #4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-hachtunganh's CAF Kernel (downloaded signed_ta-kernel.zip) signed_ta-gb-1.1.zip seemed broken link Still trying to find ta-kernel 1.1
None of those kernels saved my incoming/outgoing calls sadly. On the side note, notice different version of Broadband? Why does it change with different kernel?
http://www.mediafire.com/?22y45z15xr2jv
Here you can find all ta kernals
Sent from my LG-P500 using xda app-developers app
akashgupta$ http://www.mediafire.com/?22y45z15xr2jv Here you can find all ta kernals
akashgupta222, did you saw my video (youtube link?) I've tried signed_ta-kernel.zip (previous post) and the result is the same. Also signed_ta-gb-1.1.zip link is broken (I belive you suggested me that specific kernel?) Do you have that zip anywhere around on your computer, sdcard maybe, if so please upload it for me somwhere.
http://db.tt/19oGqnfj
Here it is, i couldn't watch the video because it did not play on my mobile, it gave some permission error
Edit : rechecked the video link, it shows that the video is private.
Sent from my LG-P500 using xda app-developers app
akashgupta222$ Here it is, i couldn't watch the video because it did not play on my mobile, it gave some permission error Edit : rechecked the video link, it shows that the video is private.
akashgupta222, sorry for that I've fixed it. WORKING VIDEO Now you can watch it :/ Thank you for your link. I'll try it now. If it doesn't work I belive I'm forced to install stock firmware from LG.
EDIT: Unforuntally even this kernel won't fix black screen :/ I guess I should start reading on how to install stock firmware for LG optimus one P500 and take my phone to a service since it's still under warranty.
Hi All,
Little app for PoGo alerts on MiBand (and any fitness tracker!)
Basically - it works when the app is running - it allows me to use my Mi Band/BIP like a PoGo+ as well as trying its best to help with the battery saver mode (makes it dimmer and more black!)
The idea is that every time the app vibrates the Band does too, as long as it's allowed in the fitness tracker app. Works for MiBand and for Amazfit Bip in my testing, I assume it works for all smartbands that allow the user to choose apps.
You can choose the features in the app and they will automagically start as long as the 'App Active' button is set to 'ON'.
Optional features are:
* Simulate Go+
* Screen dim when facedown
* Screen dim when upside down
* Screen dim when proximity sensor covered
* Screen dim for both of the above
* Screen timeout set by app screen, resets to previous whe PoGo closes
I'm testing disabling the actual phone screen backlight/LEDs without root but I don't think it's possible (PoGo app closes). Still though, it should be more efficient than PoGo battery saver mode alone.
New install instructions (APK no. 65)
To make sure the app functions correctly you'll need to do the following in the given order.
Install app
Your phone should ask you for some permissions (e.g. draw over over apps)
Accept all the permissions and accessibilty options, but press NO to the 'learn how to enable read logs'
You'll need to open up ADB and allow READ_LOGS to use the GoPlus functionality.
Use the following ADB commands:
adb shell pm grant stoobacca.apps android.permission.READ_LOGS
adb shell am force-stop stoobacca.apps
Go to accessibilty settings and make sure the app is set to ON
Hopefully when you open the app all will work!
Hello, thanks for the app.
Just installed it, and i have a problem
My device is HTC 10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AdamiX said:
Hello, thanks for the app.
Just installed it, and i have a problem
My device is HTC 10
Click to expand...
Click to collapse
I'll see if I can update for this. Just uploaded a new one which SHOULD make the black screen big enough for all phones
I've updated - I think for all questions people have sent.
My XDA doesn't show any responses to PM's so no idea if anyone has heard from me.
Latest rev. 26 should be OK.
Let me know!
Thank you for your work!
But there some bugs in new version:
1) black rectangle still not fully cover 6" screen
2) screen timeout setting not saved: I set 60, - reopen your app and there again 30
3) when I open pokemon go, then close it and look at display setting (at android menu) I see there is no one radio button selected so there maybe some bugged value set.
4) some of your app menu settings caption have 3 lines and it trimmed at end (nexus 6)
Hey man,
Thanks!
I think I broke some stuff in the most recent version. Will upload a new apk later.
1) The rectangle thing I'm working on.
2) I have set it to display the set variable. It will default to 30 if you force close the app. Might also have a problem if your phone can't support more than 30 (that's why it defaults)
3) I might have fixed this. Could you give me more info - maybe a screenshot?
4) I think I fixed the text display issue, let me know with the new apk. (also screenshot if you can)
Glad you like my app!
Stu
Today i testing version 3.5
+ Timeout option in your app now saves fine. And change phone screen timeout to this value when PoGo opens;
But i think this option is useless, what is the point to set not maximum timeout? It needed only if we cant figure out device's maximum screen timeout.
- Screen timeout does not resets to previous when PoGo hides (In version 2.0 it always resets to 1 min.)
If it difficult to restore previous value i wish to have option to reset it to 30 seconds
- Please add version of your app to top of settings page
- Some text layout bugs:
h t t p s drive.google.com/file/d/0Bw2ELmVwGgY6T2RPUDA5UVBEQ28/view?usp=sharing
hi and thx for the app but unfortunately it didn't work.
i have installed your apps, app active and simulate go plus and allowed notification from your app on mi band and tools but doesn't work.
is there anything else to do ?
many thx
edit 1 : turn on accessibilty, app is starting when launching pokemon go but don't get any notification on mi band
i have galaxy S7 edge
Ask author to upload previous version ---> 2.0
I use it, works fine.
try the new version 3.8 , doesn't work.
what is the parameters i have to do in apps and mi band ?
thx
Apparently a lot of time since the last comment, but I feel lucky today.
A dumb question: with this app, can I fully simulate a PoGo+ bracelet or it only receive vibrations from the app?
Is it still working?
dont think so, i couldnt get it to work
I am confused as to how this app works. I believe I have everything set up, it has accessibility access, but I can't seem to get it to work. Could you possibly make us first start/set-up guide? (Moto E4)
Does it still work?
I can look at updating if people are still interested..
Hi All,
Sorry I've not been at all active on this forum..
I've seen people asking if this still works (sorry some were a very long time ago)!
I know it's not really useful now as unfortunately we can't go outside.. but if I can dig out my old files and get this working, would anyone be interested?
I can't guarantee it as I don't play PoGo anymore. But if people are interested, I'll see if I can get some time to try and get it working again.
Cheers, and stay safe!
StuDB said:
Hi All,
Sorry I've not been at all active on this forum..
I've seen people asking if this still works (sorry some were a very long time ago)!
I know it's not really useful now as unfortunately we can't go outside.. but if I can dig out my old files and get this working, would anyone be interested?
I can't guarantee it as I don't play PoGo anymore. But if people are interested, I'll see if I can get some time to try and get it working again.
Cheers, and stay safe!
Click to expand...
Click to collapse
I would really be interested in this. Don't know if you had any responses in pm.
I second that.
I would be very interested into a new version!
Alright then peeps, I've tracked down a version I backed up so I'll take a look see.
Give me some time and i'll try to get a new version. If you could post any issues here it will help me with what to fix.. it might be all of it so no worries if the lists are long!
I want to secure my phone as much as possible so i turned on the "find my phone" feature to locate your phone when stolen.
But the problem i found with this is that you can turn off the basic things like mobile data or airplane mode from the lockscreen without unlocking the phone.
So when someone steals your phone while its locked with a fingerprint they can still turn on airplane mode or turn off the mobile data so its impossible to track the phone.
While when i try to turn off wifi from the lockscreen it ask me to unlock it first, same goes for most other quick toggles so thats why i find this pretty weird.
So my question is, are there more people with this problem or does it work perfectly for you?
I'm running the G930FXXU1BPHB software with the august 1 security patch and thought maybe its a software thing so im hoping someone else can check if they got the same problem as me.
Haven't tried this setting yet, but have a look at:
Settings > Lock Screen & Security > Secure Startup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Detection* said:
Haven't tried this setting yet, but have a look at:
Settings > Lock Screen & Security > Secure Startup
Click to expand...
Click to collapse
Is it me or does this setting keep changing to "do not require" by itself for anyone else? I know i've changed it to require pin a few times already.
peachpuff said:
Is it me or does this setting keep changing to "do not require" by itself for anyone else? I know i've changed it to require pin a few times already.
Click to expand...
Click to collapse
Dont think so because i turned mine of from day 1 and it still asks me for a patern each time i reboot which is a good thing
*Detection* said:
Haven't tried this setting yet, but have a look at:
Settings > Lock Screen & Security > Secure Startup
Click to expand...
Click to collapse
Yes i have that turned on but thats only for a secure boot and has nothing to do with the toggles. But i posted this on reddit also and it seems that its been fixed in the newer security patches because im still on that 1st of august patch will people with the september patch dont have this bug.
RiTCHiE007 said:
Yes i have that turned on but thats only for a secure boot and has nothing to do with the toggles. But i posted this on reddit also and it seems that its been fixed in the newer security patches because im still on that 1st of august patch will people with the september patch dont have this bug.
Click to expand...
Click to collapse
So even with that secure boot enabled, without the PIN you can still access the toggles?
Sounded to me as if it asked for the PIN before booting the OS, but as I say I haven't tried it
*Detection* said:
So even with that secure boot enabled, without the PIN you can still access the toggles?
Sounded to me as if it asked for the PIN before booting the OS, but as I say I haven't tried it
Click to expand...
Click to collapse
Well the secure boot is just to protect the device from turn on. But im talking when you have your phone already on annd have the lockscreen protected with fingerprint or anything really. But when the phone is locked, i can still turn off mobile data without it asking me to unlock the phone's lockscreen. When i want to turn off wifi or bluetooth or anything else rather then flashlight it asks me to unlock the screen first in order to turn it on or off. So again, when the phone gets stolen, the thief can turn off mobile data and them im inable to locate the device with the find my phone.,
RiTCHiE007 said:
Well the secure boot is just to protect the device from turn on. But im talking when you have your phone already on annd have the lockscreen protected with fingerprint or anything really. But when the phone is locked, i can still turn off mobile data without it asking me to unlock the phone's lockscreen. When i want to turn off wifi or bluetooth or anything else rather then flashlight it asks me to unlock the screen first in order to turn it on or off. So again, when the phone gets stolen, the thief can turn off mobile data and them im inable to locate the device with the find my phone.,
Click to expand...
Click to collapse
I see what you mean, if you lose the phone while powered on
Only workaround I can see until a fix is sent out, is turn off your phone while you are outside with it, turn on occasionally to receive texts etc
Complain to Samsung every week until it is fixed
*Detection* said:
I see what you mean, if you lose the phone while powered on
Only workaround I can see until a fix is sent out, is turn off your phone while you are outside with it, turn on occasionally to receive texts etc
Complain to Samsung every week until it is fixed
Click to expand...
Click to collapse
Well after some diggin i see that problem many have this problem and some even reported it to google in 2014 but guess without any luck. Funny that they call this a smart phone while things like this should be fixed years ago.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixel Experience 12 for the Xiaomi Mi Mix 3 [perseus]
Mi MIX 3 Telegram Global Community
Spoiler: --Warranty Advice--
_________________________________________________________
Your warranty is void.
I am not responsible for bricked devices or
thermonuclear war caused by you following
these directions. YOU are choosing to make these modifications.
_________________________________________________________
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation).
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device.
- All pixel goodies.
- Google Assistant 2.0
- Pixel 6 Pro spoofing.
- Slider settings.
- AOD.
- Ok/Hey Google with screen off.
GAPPS INCLUDED
First Time Install / Clean Flash
1. Download the latest Chinese firmware.
2. Download the ROM.zip file that you would like to install, you can get it using the corresponding command of the ROM of your choice.
3. If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
4. Flash the firmware you downloaded.
5. Now tap Wipe.
6. Now tap Format Data and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage.
Return to the previous menu and tap Advanced Wipe, then select the Cache and System partitions and then Swipe to Wipe.
7. Reboot Recovery.
8. Flash the ROM.zip file.
Update / Dirty Flash
1. Reboot to Recovery.
2. Download the proper ZIP for your device
3. Flash the ROM.
4. Reboot to System.
Android OS version: 12
Security patch level: Feb 2022
Build author: Jopii
Source code: https://github.com/PixelExperience
All device source: https://github.com/Jopii
Credits to:
- lilydess
- sergej_7
- Mitchametz
- Arrow OS Team
Last Updated 22-02-2022
22/02/2022 UPDATE CHANGELOG
February security patch.
Added face unlock.
Added support for left side volume panel.
Upstreamed all the relavent repos with LineageOS
Translations imported
Lot of bug fixes
loving this the past few days. If you add the toggle to disable the front LED when charging I could switch to this full time. Thanks for ROM!
cropster said:
loving this the past few days. If you add the toggle to disable the front LED when charging I could switch to this full time. Thanks for ROM!
Click to expand...
Click to collapse
Other than the Battery status LED, is everything else working fine? Camera's got good performance, stable enough to use as main ROM?
When charging, it does not show the charging status. During installation, it did not automatically take the settings of the SIM card operator. When you press the mobile network switch through the notification curtain, the button returns to the off state (the Internet is working normally). There is also something wrong with power consumption and performance in games. And so the firmware is good!
Can I flash this over the pixel experience android 11 rom
I'm on Pixel Ecperience as well. Can I clean flash it coming from that rom? Or Do I need to install the stock rom again and then flash this?
As no one answered the last two questions...
My phone was on Android 11 Pixel Experience. Rebooted to twrp. Wipe everything. Format data. Connect to pc and transfer the Firmware. Flashed Firmware. Flashed Rom. As for now, everything is working. Start testing it as a daily rom.
In Czechia (EU) with T-mobile provide my cellular network doesnt work, does someone know how to fix it?
Awesone, works fine on my mi mix 3, just only have a question, when I look screen my phone I can turn off without password like no with the internet connection, for security I should also enter the password to be able to turn off the device. thanks for all.
this rom works fine on my device but the only thing is that the mobile data network does not work I tried removing the 2nd sim I had and it still doesn't work any solution for this? I tried to change network in the setting but it wont let me
Shian Hinagaki said:
this rom works fine on my device but the only thing is that the mobile data network does not work I tried removing the 2nd sim I had and it still doesn't work any solution for this? I tried to change network in the setting but it wont let me
Click to expand...
Click to collapse
Make sure you've got the correct APN settings installed. I had to set mine up manually
the battery drains quite quickly, lasts approximately 2:30 hours on screen.
Thanks a lot. Factory resetted my arrow 11, flashed this, format data and factory reset again and voila. Had to input mobile details by hand but that's ok, now all is good. Performance and stability fine, battery consumption ok. Keep it coming
excuse me, but may I ask what will be the device name after installation?
I just flashed the rom.
facebook it verifies the login even though i'm logged in it still reloads and tries to verify the login.
it doesn't seem to recognize trusted devices.
Tony Ccorimanya said:
the battery drains quite quickly, lasts approximately 2:30 hours on screen.
Click to expand...
Click to collapse
I have a similar experience. On top of that, the phone will turn off when reaching a low battery level. I wonder why some people have this issue and others don't. We're all using the same firmware..
geecko said:
I have a similar experience. On top of that, the phone will turn off when reaching a low battery level. I wonder why some people have this issue and others don't. We're all using the same firmware.
Click to expand...
Click to collapse
geecko said:
Doesn't depend on 'the same firmware', everyone here adjusts his device differently, you find exactly this in every thread. Perhaps have a look at my post above, i come from arrow 11 and had no problems at all, e.g. charged yesterday morning, still have 63% and get at least 12h of permanently being on the net, downloading music, many times now. No stops, no reboot, no sudden death. It's an absolutely stable system - 4 me.
Click to expand...
Click to collapse
I can easily reach 63% battery in two hours while doing much, much less than that.
This is bomb, thanks a lot! The camera app crashes as soon I switch to slow motion mode, I'm unable to use it. Anyone experiencing the same?
Has anyone rooted and managed to pass SafetyNet?
Great battery life here too
Hey OPPO frens,
This thread is includes everything about ColorOS 13.
New Updates & General Information - feel free to add your input.
Currently released information:
Launch Event Info
History Video
Connect Every Color (NFT event to Win an OPPO Find X5 Pro)
I have been testing the Public beta of 13 and I like it a lot.
I can't use Google wallet at the moment, but I don't currently need too
Launch event already happened and Rollout timeline has been released.
Have you received your beta version?
TalkTech.info said:
I have been testing the Public beta of 13 and I like it a lot.
I can't use Google wallet at the moment, but I don't currently need too
Click to expand...
Click to collapse
Have you tried factory resetting the phone at all with it being a dirty install and Major Version jump from Android 12 > 13 rather than an incremental update
Also I'm now on the beta version C10 however I'm missing the Widgets for stuff like Weather, Battery etc
Anyone else missing this?
hlhmark said:
Have you tried factory resetting the phone at all with it being a dirty install and Major Version jump from Android 12 > 13 rather than an incremental update
Click to expand...
Click to collapse
Has this fixed the gpay issue for you?
hlhmark said:
Widgets for stuff like Weather, Battery etc
Click to expand...
Click to collapse
I don't have those either.
I have Clock, Photos, etc
Anyone else with Chinese characters on their Spotify?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SamS0806 said:
Anyone else with Chinese characters on their Spotify?View attachment 5695799
Click to expand...
Click to collapse
Same here.
Mine has Chinese letters too.
I thought it was just me. There was one other menu option that showed Chinese characters for me but I can't get back to it when I was trying to submit feedback. Does anyone know if a screen recording is necessary for the feedback to get submitted?
Have you all submitted feedback for the chinese characters? Did you see it anywhere else?
I submitted another feedback. I saw that my previous feedback was no longer in the My Feedbacks section.
Another thing, do you notice how the screen always lights up even when there is no notification? I get it, it's AOD, but I turned off the setting for Screen Always on yet it still is randomly lighting up.
Does anyone know how to turn it off?
SamS0806 said:
Have you all submitted feedback for the chinese characters? Did you see it anywhere else?
Click to expand...
Click to collapse
I don't have Spotify, but I saw the Chinese characters when I tapped on the Widget for media playback in the Control Center and saw it there. I submitted a feedback for it too.
I've noticed a few minor bugs, but I don't know how to report them. In the feedback menu, when I submit a new log it asks me to restart the phone, and after the restart, the bugs don't happen again.
I have dark theme on from sunset to sunrise, and some days when I wake up, the dark theme remains on SwiftKey keyboard although dark mode is off in the system. But maybe this is a 3rd party app problem.
I also have eye confort active from 21:00 to 07:00 and sometimes when I wake up, and it's past 07:00, although the eye confort is off in the settings menu, yet the screen has that yellow tint.
Also that Wi-Fi calling quick settings tile reappears after a restart, although I have previously removed it.
kofe said:
I've noticed a few minor bugs, but I don't know how to report them. In the feedback menu, when I submit a new log it asks me to restart the phone, and after the restart, the bugs don't happen again.
I have dark theme on from sunset to sunrise, and some days when I wake up, the dark theme remains on SwiftKey keyboard although dark mode is off in the system. But maybe this is a 3rd party app problem.
I also have eye confort active from 21:00 to 07:00 and sometimes when I wake up, and it's past 07:00, although the eye confort is off in the settings menu, yet the screen has that yellow tint.
Also that Wi-Fi calling quick settings tile reappears after a restart, although I have previously removed it.
Click to expand...
Click to collapse
Does it allow you to share a screen recording of the issue? Weird that I haven't received a notice to restart every time I log feedback.
TalkTech.info said:
I have been testing the Public beta of 13 and I like it a lot.
I can't use Google wallet at the moment, but I don't currently need too
Click to expand...
Click to collapse
Has it already been resolved or is it still an ongoing issue?
W.Logan said:
Launch event already happened and Rollout timeline has been released.
Have you received your beta version?
Click to expand...
Click to collapse
I have already received it after being in review for a week. I'm still checking out a few more features and the app compatibility.
hlhmark said:
dirty install
Click to expand...
Click to collapse
What does a dirty install mean?