Due to removal of some system files the phone shows "sorry Google not working......sorry browser not working.....nd so on" even after factory resetting. Android. Os is 2.3.3 gingerbread. The mobile is not connecting to pc using usb cord due to its port problem thats what I think. The phone charges properly but when connected to pc the pc says connected and than disconnected.. No clockwork recovery is installed its just rooted and bricked (phone repairer is unable to connect the phone to pc). Please suggest any solution
Related
Hi. newbie here..
I successfully flashed darky 9.3 rom..bit here is the problem...I can't access my internal SD card and external SD card. they dont show up on the phone and on the pc if I plug it in.. why is this so?
I tried to restore to my custom rom using clockwork backup/restore and it is successful..after rebooting it gets stuck on the galaxy s logo..
Can anybody help me?
You mean access from your computer or access from the phone itself?
I doubt the phone would boot, if it couldnt access /sdcard.
Did you check the Settings?
Try to select 'Ask on connection'
Same initial problem
I have the same problem. After connecting phone to pc no message on pc nor on phone itself.
While connected to pc phone windows shows something like "one of the devices plugged to usb had a wrong behavior and Windows cannot recognize it"
I wondered why the phone doesn't show the usb connection option anymore.
I tried switching all options (kies, massive storage, ask on connection), reflashed the costum rom and restored factory settings. But no way to establish usb connection.
GT-i9000 with 2.3.3 custom rom since april 2011
Well, suddenly my phone works again. I have usb connection back... I can' t explain it.
But I can flash roms again!
Sent from my GT-I9000 using Tapatalk
Hi Guys,
I have an Nexus s on stock running 4.1.2 kernal 3.0.31
I'm only new to smartphones and I think i made a boo-boo. While connect over usb, i turned off mass storage mode and pulled out the cable. I only then realised that I should have safely ejected on Windows 7 before turning off mass storage mode.
Now my computer will not even recognize the device. It pops of "usb device not recognised"
I tried installing the samung usb drivers - no results
I tried unistalling some usb ports in device manager in windows and rebooting - no results
help!!!!!
Thanks in advance
I just installed the pdaNet application for windows and that didn't recognize the nexus either!!!
Should I factory reset the phone?
i really wanna install Cyanogen Mod as the phone is running quite slow!!
Hi Guys,
I've had a few problems with my N5 recently...
If I plug my N5 into my PC via the stock USB cable and boot into the Bootloader (PWR+VOLDN) then it will allow me to flash the original N5 firmware, located here: https://developers.google.com/android/nexus/images, this would indicate to me that there is no issue with the actual devices ability to transfer files via USB connection... Right?
No!
For some strange reason my phone will allow me to push a full factory image to it and will also process any Fastboot commands that are sent to it but as soon as you boot into something like TWRP and try to control the phone's ADB functionality it will not find the device at all! The new MTP option in TWRP 2.8 will allow my computer to see my phone's MTP connection for about 1 second and then will immediately disconnect, the same happens when trying to connect to MTP from within Android too.
USB debugging doesn't show that it is connected when my phone is plugged into my PC and Windows makes the 'device connected' sound and then straight after makes the 'device disconnected' sound...
Any ideas? I am certain that this is an issue with my handset's hardware or software rather than any of the computers or cables... I have tried 3 different cables (including the stock cable) and also three different computers (Windows 8.1 @ Work, Mac OS X @ Work and my own personal PC running Windows 8.1 & Ubuntu @ Home)... All OSs and all computers run into exactly the same issue, device connects briefly and then disconnects.
I have troubleshooted issues relating to the driver. This is not the issue... Device Manager cannot even see the hardware after the disconnect.
Thanks for any help in advance,
Lewis
Also:
-Android does not detect that the USB is charging the device unless the device is booted with the cable attached (if it's not attached before the 'Google' screen then it can't see the USB input at all, within android or TWRP, of course...).
Having the exact same problem. Did you find a solution?
EvilBetty said:
Having the exact same problem. Did you find a solution?
Click to expand...
Click to collapse
It's most likely a driver issue.
Elluel said:
It's most likely a driver issue.
Click to expand...
Click to collapse
Not a driver issue.
3 different Nexus 5s, 5 different workstations. Other two Nexi are fine on all 5 PC's.
1 PC used for ADB forensics, 2 used for ADB development work, one known working for ROM'ing / rooting.
Phone has been factory reset, factory ROM'd from Fastboot. Connects fine on Fastboot. Will not connect on ADB / MTP.
On a fresh PC / phone reboot, the PC will detect the phone for just a second and then it will not reconnect until process is completed.
-EB
What's your adb version?
Went on for about 2 weeks, then suddenly went away on its own. I have no idea what the problem was or the solution. Sorry.
i have a nexus 5 which has stock ROM and blu spark kernel . i locked the bootloader while on the same kernel and again unlocked it . . the phone is bootlooping into twrp and the google logo . in twrp it says unable to mount data . i can access twrp . . i am unable to flash anything . it says unable to mount data/ . please the attachment
When I plug in a my tmo galaxy s6 into my windows computer it says "The last USB device you connected has malfunctioned, and windows does not recognize it." The s6 charges fine but I can't get it to connect to my computer. I also tried a mac and it wouldn't give me any mounting options.
I was trying to unroot and return to stock using ODIN (which is something i've done before) but now I'm stuck in a bootloop and I can't get the computer to recognize the device. I've tried to do a factory reset from recovery but it still leads to a bootloop. Any ideas??
Any help please?....
Hi all
I've had a soft bricked device now for 4 days I've read almost every post on the net to resolve this issue. So my Samsung S6 SM-G920F is stuck on the blue screen saying "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software." I can get into download mode 'recovery' however my phone will not connect to my computer via usb. With an error message stating "usb device not recognised. The last usb device you connected to this computer malfunctioned and Windows does not recognise it.
I have tried:
Changing cables
Changing computer
Deleting drives - rebooting comp to reinstall
Removing kies
Removing smart switch
Reinstalling smart switch
Reinstalling sub drivers
Editing power options and disabling USB ports
Entered HP BIOS and ran a port check which did however result in failure but then same situation on another HP laptop with working ports.
The device is charging when plugged in but not available to flash and reboot/bootloop.
If anyone has a resolution I will be eternally grateful.
Thanks in advance