Hello when i flash one custom rom on 6.0 i lost my efi folder and imei. After that I even hard brick the phone and i get back the efi folder with coloros rom. And after that i install oxygenos rom, but i dont like it and try to instal exudos (my previus rom) cm12.1, cm12.1s, Paradox, omnirom and i stuck on the bootloop logo. Put the oxygenos rom and work fine. But its almost pure android and i dont like that.
P.S. i tried and coloros and i dont get stuck on bootloop. So only this to roms works fine for me now. Any one if can help me?
UPDATE: after flashing new rom im go to reboot from main menu, and the twrp tells me "no os install, are you sure want to reboot"
Related
I rooted my phone by unlocking my bootloader, putting philz touch recovery, and flashing superSU.zip. After using my phone with root for a while, i noticed that some things were really unstable and buggy, such as it wouldn't charge, so i decided that i might as well flash cyanogenmod 12 since i have a recovery. This was my first mistake, as flashing cyanogenmod put my phone into an infinite boot animation screen. I then used adb to sideload the official Motorola 5.1 update. But this also gave me an infinite bootloop. I tried flashing cyanogenmod 12.1, that also didnt work. I tried flashing stock android 5.1, also bootlooping. I did some searching and i found that my bootloader was not recent enough to flash lollipop roms. So i tried again after updating my bootloader, and now its even worse. It doesn't even attempt to start up, it just goes straight into recovery mode as soon as i boot it up. It also has this strange screen flickering/glitching going on, like this. I don't even know where to go from here so any help would be greatly appreciated.
Some extra info:
I did clear all cache before flashing.
Model number is XT1032
Bootloader version is 4118, before it was 4113.
I recommend flashing a stock 4.4.4 ROM to your phone using fastboot commands. Do no flash anything older than 4.4.4.
Flash cm11 first. I had the stuck at bootanimation. On cm 12.1 flashed 11 then wiped and flashed 12.1 and all is Good
Good evening!
Just wanted to update my girlfriends mi4i from an Kitkat Ferrari rom to a newer one. I had an older twrp on the phone, the one that came with the toolkit for mi4i. For the newer rom i should have at least twrp 2.8.7.. . I found a ferrari twrp 2.8.7 and flashed it per flashify. All went fine. Rebootet all worked. So i wanted to install new rom. In recovery i did n factory reset, which didnt finish. I had to abort it after 15min.
Since then, device wont boot beyond bootscreen. When i try to boot into reovery, i just enter fastbootscreen.
I thought, ok t least fastboot. But when i try to flash any recover through the toolkit, it seems lime all is going well (no errors) but it does not upload the file.. It says in 1,4seconds.. File was sent.. Which is definately wrong 30 mb in 1,4seconds.
Is there anything left i can do?
No working recovery and no working fastboot does sound fuctup?
Thanks for reading
Flash MIUI via Fastboot, it should be fine.
BTW You can never install MIUI via Custom Recovery.
Just to finish. Was able to do a fastboot rom flash.
Worked. Solved
Hi,
This is a new Mi4w Global and I got tired of waiting to Marshmallow to come OTA so decided to try CM13 and seem to have bricked it. Please help!
I flashed latest TWRP (also tried CyanogenMod recovery), then I did the factory reset, wipe cache, flashed the CM13 ROM but it won't boot. Always flashes the Mi logo and then straight into Fastboot. I can still access recovery by holding volume up and power, but no amount of flashing the ROM seems to work. I've tried latest Stable and Nightly CyanogenMod ROMs.
Did I miss a step? One thing I remember doing which might have been the problem is while I still had the original Xiaomi recovery I opted to boot onto System 2 or whatever. I think I flashed recovery straight afterwards. I wonder if that is the cause?
Anyway, please help me! Many thanks if you can help me get my phone working again.
Update: In case this helps anyone else, I did manage to find an original Mi4 recovery so I flashed it and the I also flashed the official MIUI developer build of Marshmallow. Now my phone is unbricked. I would still like to figure out how to root it and install CM13 sometime, but at least I have a working phone for now.
It's simple, you selected system 2 before installing cm13, and two installed rom in system 1. Be on system 1 and try again.
Prashanth Meesara: said:
It's simple, you selected system 2 before installing cm13, and two installed rom in system 1. Be on system 1 and try again.
Click to expand...
Click to collapse
OK thanks. What is system 2 then, is that the "sdcard" partition? I had looked in both TWRP and Cyan recovery for an option to change the boot partition but couldn't find it.
I attempted to switch custom rom and end up in a brick situation.
What actually happened:
I rooted my device and installed twrp successfully.
Then I found this thread: https://forum.xda-developers.com/mi-4i/development/rom-lineageos-15-0-t3671815
I was really interested in switching to custom rom and downloaded all necessary stuff.
(Here comes my mistake) I boot to twrp and flashed the latest firmware (8.1.5.0), wipe cache, latest rom build (LOS 15.1),wipe cahe,gapps,wipe cache and reboot to system. (all process altogether)
Now device stucked at MI logo and never booted to system again. And unable to boot to twrp mode too.
What i tried to resolve(but failed):
Device was showing lineage battery icon but nothing else was happening. So i decided to return back. I flashed my device with latest stock flashboot rom "ferrari_global_images_V9.2.3.0.LXIMIEK_20180414.0000.00_5.0_global_680c582f20" and successfully flashed it as while charging i got led light back and stock battery icon but issue remain the same. Stucked at boot loop.
I also tried Fastboot Flash Through CMD-Prompt https://in.c.mi.com/thread-334-1-0.html
But still not working. I think it must be due to firmware upgrade to oreo and if downgrade is possible, issue can be resolved but not sure and don't really know how to execute that.
Please help me in solving this issue and whatever suggestion you give please provide proper guidance or link to guidance as I'm still new to all this.
Video showing bootloop on mi4i device : https://drive.google.com/open?id=1ufwk8TNIUmycJUdjTmDBXj38-1cPCrBu
I have been flashing cynogenmod and LineageOS since the Galaxy S2 so I thought I knew what I was doing but on this occasion I may have gotten ahead of myself.
I got the UK version of theMi Mix 3, waited 72 hours, unlocked it, flashed twrp and flashed [9.0][OFFICIAL]RR v7.0 & Pixel ExPie [GSI]
I do right ahead and flash gappsand magisk too and when I rebooted i just leep seeing the Mi logo and the unlock warning on repeat.
So i wiped my cache and system again, tried again without gapps and magisk but the same thing happened.
I then tried [non-GSI] Unofficial ArrowOS 9.x and [non-GSI] Unofficial Pixel Experience P but the same thing happened.
I think I might be missing something important about "China 9.1.10 Vendor"... all the instructions for each rom have something vague like that.
Do i perhaps have to go and get the factory rom for the chinese version and flash that before i flash my custom rom?
If so, can anyone point me to the location?
Also, is it then important not to wipe anything before flashing the custom rom on top?
still stuck
I thought I'd answered my own question and i found the link for the original chinese rom.
I flashed that and I can boot to it perfectly.
So i rebooted to recovery and quickly learnt that running miui restores the original recovery...
So i rebooted to fastboot, reflashed twrp, flashed miui then flashed arrow...
but i'm still stuck in a boot loop!
ChrisI984 said:
I thought I'd answered my own question and i found the link for the original chinese rom.
I flashed that and I can boot to it perfectly.
So i rebooted to recovery and quickly learnt that running miui restores the original recovery...
So i rebooted to fastboot, reflashed twrp, flashed miui then flashed arrow...
but i'm still stuck in a boot loop!
Click to expand...
Click to collapse
Format data by typing yes then flags magisk on custom roms