This probably will be strange question, but I need to try...
My company is using the 3rd party app for access emails from outside network. (you need to have private server inside company, then you will not be able to test it). Issue is that this app does not work on some Custom ROMs.
The developer of this app stated, that app will not work if SuperSU or eXposted is installed and how detection is done is their know-how, so they will not say how it is done. I would be fine with this answer if it would be true.
Here is why I do not believe it is true:
> The app works on any Android 4.4 custom ROM, does not matter if it was rooted or SuperSU was installed
> The app works on any Android 5.0 custom ROM, does not matter if it was rooted or SuperSU was installed
> The app works on some Android 5.1 custom ROMs, but I was not able to figure out why. It work on rooted CM12.1 with SuperSU installed or rooted @temasek Temasek ROM, but it does NOT work on the AICP / SlimLP / Resurection ROMs which all of them include SuperSU
Now I´m on the start line again with Android 6... to find on which ROM the app will work or not...
I already tested these:
> app works on CM13, but this ROM is not so friendly as I used to, I miss a lot of features there
> app works on @temasek Temasek ROM, but almost every second app I try start it FC, so not suitable for use yet
> app does NOT work on @jgcaap [ROM][6.0] CyanogenMod 13.0 Builds [LAG FREE][2015/12/04], ROM not rooted... it required SuperSU to be installed
> app does NOT work on @danieldmm [ROM][CM13][Android 6.0] TugaPower 14.0, ROM not rooted... it required SuperSU to be installed
So, my question is: How the root/SuperSU is handeled by Android 6? I´m not developer, so maybe I´m asking wrong way.
What I would like to understand is, why some ROMs are rooted (have the switch in the Developer menu), when other ROMs require to be SuperSU installed? So, the app works OK on the first "kind" of ROM and it does not on second "kind".
Thank you very much.
Edit: @Heisenberg advised me in past, when I was struggling with A5.1.1 that it might be due to Privacy Guard on Android 5
You are wrong, my rom it's pre rooted with SuperSU 2.56, you can find the acces in Settings, over TugaPower rom.
Enviado do meu A0001 através de Tapatalk
danieldmm said:
You are wrong, my rom it's pre rooted with SuperSU 2.56, you can find the acces in Settings, over TugaPower rom.
Enviado do meu A0001 através de Tapatalk
Click to expand...
Click to collapse
The problem is that even I did allow the root in the developer menu, the TiberianBackup was still complaining that it cannot get the root access, so I had to install/allow the SuperSU. And then, whey I finally restore the company app from backup ... it doesn't work, probably because the SuperSU.
So, question is why some ROMs can be rooted and no SuperSU is required there (TiberianBackup works OK)?
Examples are: CM12/CM12.1/CM13 or @temasek ROM ... there is no SuperSU and TB still get root access and the company app works there? How come? I would like to understand this :angel:
djha53k said:
The problem is that even I did allow the root in the developer menu, the TiberianBackup was still complaining that it cannot get the root access, so I had to install/allow the SuperSU. And then, whey I finally restore the company app from backup ... it doesn't work, probably because the SuperSU.
So, question is why some ROMs can be rooted and no SuperSU is required there (TiberianBackup works OK)?
Examples are: CM12/CM12.1/CM13 or @temasek ROM ... there is no SuperSU and TB still get root access and the company app works there? How come? I would like to understand this :angel:
Click to expand...
Click to collapse
Maybe because they are using the built in root from stock CM ... And yes over mine, TitaniumBackup work good.
danieldmm said:
Maybe because they are using the built in root from stock CM ... And yes over mine, TitaniumBackup work good.
Click to expand...
Click to collapse
Ahaaaa, so there are differences how to implement the root, ok. Thank you.
So, the company app works only on the "stock CM root", but not on the any other.
Yes, I do not argue with you that TitaniumBackup doesn't work, it works, but both, root and SuperSU, have to be allowed on your ROM.
To be absolutely honest, I like your ROM, but also I need my company app works, but suddenly it doesn't work on your ROM
djha53k said:
This probably will be strange question, but I need to try...
My company is using the 3rd party app for access emails from outside network. (you need to have private server inside company, then you will not be able to test it). Issue is that this app does not work on some Custom ROMs.
The developer of this app stated, that app will not work if SuperSU or eXposted is installed and how detection is done is their know-how, so they will not say how it is done. I would be fine with this answer if it would be true.
Here is why I do not believe it is true:
> The app works on any Android 4.4 custom ROM, does not matter if it was rooted or SuperSU was installed
> The app works on any Android 5.0 custom ROM, does not matter if it was rooted or SuperSU was installed
> The app works on some Android 5.1 custom ROMs, but I was not able to figure out why. It work on rooted CM12.1 with SuperSU installed or rooted @temasek Temasek ROM, but it does NOT work on the AICP / SlimLP / Resurection ROMs which all of them include SuperSU
Now I´m on the start line again with Android 6... to find on which ROM the app will work or not...
I already tested these:
> app works on CM13, but this ROM is not so friendly as I used to, I miss a lot of features there
> app works on @temasek Temasek ROM, but almost every second app I try start it FC, so not suitable for use yet
> app does NOT work on @jgcaap [ROM][6.0] CyanogenMod 13.0 Builds [LAG FREE][2015/12/04], ROM not rooted... it required SuperSU to be installed
> app does NOT work on @danieldmm [ROM][CM13][Android 6.0] TugaPower 14.0, ROM not rooted... it required SuperSU to be installed
So, my question is: How the root/SuperSU is handeled by Android 6? I´m not developer, so maybe I´m asking wrong way.
What I would like to understand is, why some ROMs are rooted (have the switch in the Developer menu), when other ROMs require to be SuperSU installed? So, the app works OK on the first "kind" of ROM and it does not on second "kind".
Thank you very much.
Edit: @Heisenberg advised me in past, when I was struggling with A5.1.1 that it might be due to Privacy Guard on Android 5
Click to expand...
Click to collapse
It works on my rom for a long time.
djha53k said:
but both, root and SuperSU, have to be allowed on your ROM.
Click to expand...
Click to collapse
No, sorry but it's not true, root over my rom it's full controlled by the SuperSU root app and not CM. When was the last time you flashed my rom and wich version? Did you tested run your app with the Xposed module to hide root in Rom?
Enviado do meu A0001 através de Tapatalk
jgcaap said:
It works on my rom for a long time.
Click to expand...
Click to collapse
No, the app does not work on your ROM
danieldmm said:
No, sorry but it's not true, root over my rom it's full controlled by the SuperSU root app and not CM. When was the last time you flashed my rom and wich version? Did you tested run your app with the Xposed module to hide root in Rom?
Enviado do meu A0001 através de Tapatalk
Click to expand...
Click to collapse
I tested the latest TugaPower 15.0.
Yes, the "root is fully controlled by the SuperSU" is the problem for that app, the SuperSU is detected as security threat and it will not start.
And yes again, the Xposed module is detected by that app too as security threat, so it will not start as well.
So, basically saying, I need to use ONLY custom ROMs, which implement the CM root, no SuperSU or Xposed is allowed.
And there is not many of them and its hard to find one with nice features and cherry-picks.
Question: how do you decide which root will be included in your ROM when you building it?
djha53k said:
No, the app does not work on your ROM
I tested the latest TugaPower 15.0.
Yes, the "root is fully controlled by the SuperSU" is the problem for that app, the SuperSU is detected as security threat and it will not start.
And yes again, the Xposed module is detected by that app too as security threat, so it will not start as well.
So, basically saying, I need to use ONLY custom ROMs, which implement the CM root, no SuperSU or Xposed is allowed.
And there is not many of them and its hard to find one with nice features and cherry-picks.
Question: how do you decide which root will be included in your ROM when you building it?
Click to expand...
Click to collapse
Then you must be doing something wrong... This was the first thing i fixed. use 2.52 version.
jgcaap said:
Then you must be doing something wrong... This was the first thing i fixed. use 2.52 version.
Click to expand...
Click to collapse
OK, gonna test it now... will you posted :good:
Edit: I did tested on the cm-13.0-20151204-jgcaap-bacon.zip ... Downloading the cm-13.0-20151205-jgcaap-bacon.zip now...
jgcaap said:
Then you must be doing something wrong... This was the first thing i fixed. use 2.52 version.
Click to expand...
Click to collapse
Aha, I got it, why it doens't work ...
In TWRP installed:
- cm-13.0-20151205-jgcaap-bacon.zip
- slim pico gapps
But when I pressed reboot I got message> "Your device dost not appeared to be rooted. Install SuperSU now? This will root your device."
So, I have two options...
1) Press> "Do Not Install" ... which will caused that TitaniumBackup will not work, so I will not able to do restore of my apps
2) Swipe> "Swipe to Install" ... which will caused the company app will not work, so I will not able to connect to company emails
Either way is bad for me :crying:
djha53k said:
Aha, I got it, why it doens't work ...
In TWRP installed:
- cm-13.0-20151205-jgcaap-bacon.zip
- slim pico gapps
But when I pressed reboot I got message> "Your device dost not appeared to be rooted. Install SuperSU now? This will root your device."
So, I have two options...
1) Press> "Do Not Install" ... which will caused that TitaniumBackup will not work, so I will not able to do restore of my apps
2) Swipe> "Swipe to Install" ... which will caused the company app will not work, so I will not able to connect to company emails
Either way is bad for me :crying:
Click to expand...
Click to collapse
Download SuperSU 2.52 (not any other version)
Flash zip and have fun.
I'm trying to bring a surprise...
jgcaap said:
Download SuperSU 2.52 (not any other version)
Flash zip and have fun.
I'm trying to bring a surprise...
Click to expand...
Click to collapse
OK, downloaded the BETA-SuperSU-v2.52.zip, so I'm gonna re-flash it again:
- cm-13.0-20151205-jgcaap-bacon.zip
- Slim_zero_gapps.BETA.6.0.build.0.x-20151203.zip
- BETA-SuperSU-v2.52.zip
but I'm skeptic... as the company app detect for SuperSU and Xposed... so, even the TB will work OK, the mail will NOT
... BRB...
jgcaap said:
Download SuperSU 2.52 (not any other version)
Flash zip and have fun.
I'm trying to bring a surprise...
Click to expand...
Click to collapse
Nope, doesn't work :crying:
As expected... app crashed once I enter password... as before or on any other ROM with SuperSU installed
So, let's test another ROM...
Installing the One+ VM13 Android 6.0 Rom for the One by @vinman12... no SuperSU required, so hopefully my company app will works... all fingers crossed...
I really like to know/understand how the root works here ...
djha53k said:
So, let's test another ROM...
Installing the One+ VM13 Android 6.0 Rom for the One by @vinman12... no SuperSU required, so hopefully my company app will works... all fingers crossed...
I really like to know/understand how the root works here ...
Click to expand...
Click to collapse
If you don't flash su then be sure to turn it on in developers options. Also if you don't flash su the su in vm13 tweaks will not work it will just restart the ui. If you do flash su then the su in vm13 tweaks will open su app.
Did you get that
Sent from my A0001 using Tapatalk
vinman12 said:
If you don't flash su then be sure to turn it on in developers options. Also if you don't flash su the su in vm13 tweaks will not work it will just restart the ui. If you do flash su then the su in vm13 tweaks will open su app.
Did you get that
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I'm not care so much about the "vm13 tweaks", my MAIN issue is to make the company app works and IT IS working, huray :good:
And your ROM has other features which I like, such as: auto unlock once I enter correct PIN, custom-able tiles, etc... :victory:
Thank you :good:
Related
Good Day guys
Before (if) I root, does anyone know if Xposed will run on the X2 ? If so, are modules safe to run from a security/privacy point of view ? Is it true that as long as modules are open source they are safe ?
elio321 said:
Good Day guys
Before (if) I root, does anyone know if Xposed will run on the X2 ? If so, are modules safe to run from a security/privacy point of view ? Is it true that as long as modules are open source they are safe ?
Click to expand...
Click to collapse
No, Xposed doesn't work. It will send you into a bootloop.
Hello,
... a never ending story with my GEM-702L ...
I've unlocked the bootloader, installed TWRP and updated to B106 inkl. SuperSU.
All works fine ... with one exception: XPosed. I *really* need it, especially for XPrivacy.
For Lollipop a new XPosed version is released. So i tried my luck ... and failed.
I installed the XPosed Installer 3.0 Alpha 4 and the ARM64 SDK22 framework via TWRP.
After that my device has a boot loop.
Has anybody other experiences with XPosed and is there a workaround to install XPosed successfully? Maybe with an Android 5.0 Build? I prefer to use an older build version if it allows to use the XPosed framework.
I hope you can help me.
Many thanks in advance and best wishes
Dan
dand751801 said:
Hello,
... a never ending story with my GEM-702L ...
I've unlocked the bootloader, installed TWRP and updated to B106 inkl. SuperSU.
All works fine ... with one exception: XPosed. I *really* need it, especially for XPrivacy.
For Lollipop a new XPosed version is released. So i tried my luck ... and failed.
I installed the XPosed Installer 3.0 Alpha 4 and the ARM64 SDK22 framework via TWRP.
After that my device has a boot loop.
Has anybody other experiences with XPosed and is there a workaround to install XPosed successfully? Maybe with an Android 5.0 Build? I prefer to use an older build version if it allows to use the XPosed framework.
I hope you can help me.
Many thanks in advance and best wishes
Dan
Click to expand...
Click to collapse
The problem is Xposed just doesn't support the framework on the Huawei devices just yet. Hopefully, since Huawei makes the Nexus 6P that will change but if it does it probably won't be until Marshmallow is released for the X2. Huawei is working on it.
Thank you for your reply.
With other words: I have an unusable smartphone. Without regulation of permissions, I won't use an android device with all of my personal data. My privacy is too important for me.
Huawei created a really great device but some details are horrible.
1st: Unlocking bootloader
2nd: Terrible (and in fact: no) support for international models
3td: This situation.
It seems, Huawei makes the same mistakes like other big manufactures before...
I'm looking forward for some better updates for the xposed framework and/or new builds from huawei.
Best wishes
Dan
Also boot loop with xposed framework v78 on B106.
So since Sep. 2015 I have an unuseable smartphone...
To trust in Huawei was my biggest (and expensive) fail since a very long time.
dand751801 said:
Also boot loop with xposed framework v78 on B106.
So since Sep. 2015 I have an unuseable smartphone...
To trust in Huawei was my biggest (and expensive) fail since a very long time.
Click to expand...
Click to collapse
The framework doesn't support Huawei phones. Maybe this will change with the Nexus 6P.
I know, but I really need xposed + xPrivacy.
So, I'll try every update til xposed is running fine ... Or I sell my MediaPad and buy something else that has not these problems.
you be doing well to sell this phone for what you paid for it.
I have posted Working Xposed for our X2 here:
http://forum.xda-developers.com/mediapad-x2/development/mod-xposed-framework-mediapad-x2-t3255963/post63982156#post63982156
ajsmsg78 said:
I have posted Working Xposed for our X2 here:
http://forum.xda-developers.com/mediapad-x2/development/mod-xposed-framework-mediapad-x2-t3255963/post63982156#post63982156
Click to expand...
Click to collapse
Could you make the same for 703L? Unfortunately this version do not work for me... It's a really pitty because Xposed it is one thing which I miss in X2...
I have installed .app and flashed .zip from recovery but after reboot Xposed framework is not active and can not be activated. At least there is no bootloop...
trurl3 said:
Could you make the same for 703L? Unfortunately this version do not work for me... It's a really pitty because Xposed it is one thing which I miss in X2...
I have installed .app and flashed .zip from recovery but after reboot Xposed framework is not active and can not be activated. At least there is no bootloop...
Click to expand...
Click to collapse
I'm on my 703L and its working fine for me. I had to install the app first then boot into recovery and install the framework in that order.
Will try once more...
Unfortunately...
What can I do?
dand751801 said:
I know, but I really need xposed + xPrivacy.
So, I'll try every update til xposed is running fine ... Or I sell my MediaPad and buy something else that has not these problems.
Click to expand...
Click to collapse
Well good news...."ajsmsg78" tested it working on X2 !
Go to:
http://forum.xda-developers.com/med...ediapad-x2-t3255963/post63982156#post63982156
trurl3 said:
Will try once more...
Unfortunately...
What can I do?
Click to expand...
Click to collapse
Flash the framework in recovery once more and see if it works. I did it on KangVIP B109. What system are you on?
I flashed it at least four times... I am on B109 Kangvip
trurl3 said:
I flashed it at least four times... I am on B109 Kangvip
Click to expand...
Click to collapse
That's strange. When you first flashed the Framework and restated did you get the "updating apps 1 of xx" dialog box?
Yes, I had it.
Now I'm back to start because I've restored nandroid backup from before of installing Xposed-framework. Will try once more from beginning. SO once more:
1. Xposed Installer.app
2. Xposed Framework from recocvery
Is there need of wiping cache after installing framework?
Edit// One more try to no avail.
Edit// Will try to install superslim KangVip from @ajsmsg78 and then will see...
trurl3 said:
Yes, I had it.
Now I'm back to start because I've restored nandroid backup from before of installing Xposed-framework. Will try once more from beginning. SO once more:
1. Xposed Installer.app
2. Xposed Framework from recocvery
Is there need of wiping cache after installing framework?
Edit// One more try to no avail.
Edit// Will try to install superslim KangVip from @ajsmsg78 and then will see...
Click to expand...
Click to collapse
After install, open up Xposed Installer and go into settings and check Disabled Resource Hooks. You have to do that in order for the framework to start working. Just restart after you check that box.
ajsmsg78 said:
After install, open up Xposed Installer and go into settings and check Disabled Resource Hooks. You have to do that in order for the framework to start working. Just restart after you check that box.
Click to expand...
Click to collapse
Thank you, that did the trick . Now I will start to test my favourite modules.
The reason I am posting here and not in the Rom section is because I am not a developer. I am an Android enthusiast who, with the help of a few awesome tools, some reading and some help from a couple of great devs, I was able to build a custom rom from a stock first release. I have been running it now for a couple of weeks and battery life is awesome. Just enough Samsung apks left in too call it a stock rom but not so many to cause it to lag. I thought that since it was running so nice, I would share it with you. So, without further ado, this is what I came up with.
"Ghost Project v1.0 6.0.1 t350" This is only for the t350.
With the help of a few awesome people, that provided me with the direction and resources links, I was able to take a stock firmware.tar (T350XXU1BPE3) and make a TWRP flashable zip. This is what I came up with:
I am not a developer..... Let me make this clear.. Lol.. I am not a developer. But I did use an awesome tool that allowed me to make this rom " superr kitchen" .... http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296/page26
So first and foremost a big thanks goes out to this developer for this awesome tool.
I would also like to give props to Samsung and Sammobile.com for the firmware.
The kernel is from http://forum.xda-developers.com/galaxy-tab-a/development/kernel-galaxy-tab-sm-t555-5-8-2016-t3433560 and is a stock, permissive kernel. By "[ashyx, http://forum.xda-developers.com/member.php?u=4899305 Recognized Contributor]" another awesome dev. This is a stock kernel in every respect with SElinux set to permissive.
I would also like to thank and give props to"{FankieT} of {R3Ds themes and Development}" https://plus.google.com/communities/102477541363210451018 for all of his help and guidance. He was who got me started into Linux through Ubuntu and spent many hours teaching this old dog the ways of Android coding. Just a pinch of coding on my part..lol
Glockman4519
Owner
Hayes Tech Rom Reviews
Dec 09, 2016
Use at your own risk. ********You have been warned..*********
Features:
1. Rooted with chainfires SuperSu in system, not systemless (I hate systemless root)
2. Busybox installed
3. Debloated. I didn't go too far (for reliability) but will work on getting more Samsung system apps removed.
4. Zip aligned
5. Deodexed (I may make one that is odexed later on)
6. Removed Kies
7. Custom kernel
Stock but SElinux permissive (see note on developer in Intro)
8. Some script changes but nothing to change system behavior
9. Added ES File explorer v3.2.5.
This app will try to update unless Play Store settings are changed to not auto update. But if you like the latest than update it.
10. Added Nova Launcher v3.3
I don't like the newer Material Designed updated builds. This will also try to update unless settings in Play Store are set to not auto update.
11. Latest Google Keyboard.
I just don't care for Samsung's and like the theming features of Google's latest keyboard. Samsung keyboard is still in though if you prefer to use it instead.
12. According to the toolkit, Knox was removed. Although I still see it in the settings tab under Settings/about phone. I don't think this can be removed safely however all updates (annoying notifications stating that there is an update available) have been removed so there shouldn't be any chance of accidentally updating to the latest firmware, if any is released. If you want an update than you will have to download any updates ( if the are any) from Samsung and use Odin to install it.
Kernel:
Here is a link to the kernel developer's thread, who is another awesome dev, who's kernel is the heart of this rom.
http://forum.xda-developers.com/gal...el-galaxy-tab-sm-t555-5-8-2016-t3433560/page8
By "[ashyx, Recognized Contributor]" This is a stock kernel in every reguard with SElinux set to permissive.
A few other small things here and there but mostly stock.
-This is a flashable zip using TWRP recovery and I highly recommend the 2.8.7.0 build as apposed to the 3.0.2.0 build that is also on XDA in this forum.
Link to recovery built by "ashyx" an awesome dev...
http://forum.xda-developers.com/galaxy-tab-a/development/recovery-t3426560/page13
-Since this is a stock rom build, gapps are included
#####Flashing instructions#######
###MUST BE ON MARSHMALLOW BUILD ****T350XXU1BPE3******####### so, if you are on a lollipop build (5.0.1) you need to update to 6.0.1 and have TWRP installed........
1. Make a backup onto your external SD card or on a PC using TWRP recovery. This is a very important step as things do go wrong. You have been warned.
2. Wipe. I recommend a clean install with all 4 major wipes done (system, Cache, Dalvik Cache and Data)
3. Flash "Ghost Project v1.0 6.0.1 t350" rom zip.
4. Wipe both Cache and Dalvik Cache
5. Reboot to system and profit.
*****The first boot will take a long time to boot. Put the device down and walk away until it boots (could take up to 15 minutes ) but most likely around 12 to 15 minutes. That is because all files are deodexed.
After it boots up Go ahead and set up the device the way you like it and enjoy.
I also have a Google Plus Communitee Called "Hayes Tech Rom Reviews" where you can go to watch reviews/overviews of custom roms for many devices that I own. I have about 20 to 25 devices now and try to do reviews on all the diferent roms out for them. I also have awesome links like the 3Minit battery mod by{made by "gharrington"} for the Nexus 6 and many more things. Please feel free to stop by.
https://plus.google.com/communities/109262972011341635244
**LAST BUT NOT LEAST****USE AT YOUR OWN RISK**
Warning, I am not a developer. All I am doing is sharing my personal build. I am not nor will I be responsible for anyone ruining your device. Thermonuclear war or Loss of job from device not working is your responsibility. And above all this zip will void your warranty.
I can't think of anything else..lol.. This is the first time for me so I'm not too sure about proper post etiquette for Custom Roms. I am not posting in the roms section because I am not a developer. I do not have the skills those great people have. We just do not have any stock based roms yet and mine is running great so I am sharing with you all. I am going to try to add more custom features and may even add a pure stock rom for total stock experience, let me know... Enjoy.
A video review of my rom... Go here if you would like to see it
https://youtu.be/dVnx709LO7Y
I built another rom for those that want the stock experience but still want it rooted and Knox removed. It is also Zip Aligned and is running the same permissive kernel for Xposed Mods to work better with it.
Download Rom (AFH)
Stock/Rooted/Deodexed/Debloated/Knox Removed/Zip Aligned/Permissive Kernel/ES File Explorer 3.2.5, Nova Launcher 3.3, Latest Google Keyboard
https://www.androidfilehost.com/?fid=673368273298916139
Stock/Rooted/Deodexed/Knox Removed/Zip Aligned/Permissive Kernel/No Extra Apps Added (Pure Samsung)
https://www.androidfilehost.com/?fid=385035244224406713
Xposed Installer Zips (For Samsung) By wanam, Recognized Contributor. You can find his thread here http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Screens:
If you want to run the wallpapers that I am, I am working on getting them into the default wallpaper but until then you can get it here
Just in case again. Lol
Sent from my Nexus 6 using XDA Premium HD app
Merry Christmas Everyone.
the link to the rom doesnt work
ratchetrizzo said:
the link to the rom doesnt work
Click to expand...
Click to collapse
I am checking now to see whats up. Here is my original Google drive link.
https://drive.google.com/file/d/0ByTpk6hgHRa5VU4wSkVrcy1jakU/view?usp=drivesdk
ratchetrizzo said:
the link to the rom doesnt work
Click to expand...
Click to collapse
AFH link is now fixed
https://www.androidfilehost.com/?fid=673368273298916139
glockman4519 said:
AFH link is now fixed
https://www.androidfilehost.com/?fid=673368273298916139
Click to expand...
Click to collapse
Does xposed work on this rom? If so, which version?
thanks!
ratchetrizzo said:
Does xposed work on this rom? If so, which version?
thanks!
Click to expand...
Click to collapse
Yes it does. I used the kernel that is in this forum to build it with and it is a permissive kernel. The version is v87.1-sdk23-arm made by Wanam specifically for Samsung. I am running it now asking with gravitybox and a few other mods.
Just remember that since it is deodexed it will take a long, long time to boot. I timed it on my last 2 flashes at around 13 minutes both times. My battery life is outstanding.
glockman4519 said:
Yes it does. I used the kernel that is in this forum to build it with and it is a permissive kernel. The version is v87.1-sdk23-arm made by Wanam specifically for Samsung. I am running it now asking with gravitybox and a few other mods.
Just remember that since it is deodexed it will take a long, long time to boot. I timed it on my last 2 flashes at around 13 minutes both times. My battery life is outstanding.
Click to expand...
Click to collapse
do you have a link for that?
ratchetrizzo said:
do you have a link for that?
Click to expand...
Click to collapse
Yes I do but only to my Google Drive. I will try to link them to the OP later but to then here you go.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
glockman4519 said:
Yes I do but only to my Google Drive. I will try to link them to the OP later but to then here you go.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
Click to expand...
Click to collapse
Just installed this, flashed it and xposed at the same time, took 7 minutes to boot the first time.
Updating, reinstalling and debloating things I don't need now.
Seems faster than the debloated 5.02 rom I was on.
Will keep you posted after everything is done
glockman4519 said:
Yes I do but only to my Google Drive. I will try to link them to the OP later but to then here you go.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
Click to expand...
Click to collapse
everything works great.
Quick question, what did you use to change your clock and signal icon colors?
Wanam isn't changing the clock color or left hand icons for me.
ratchetrizzo said:
everything works great.
Quick question, what did you use to change your clock and signal icon colors?
Wanam isn't changing the clock color or left hand icons for me.
Click to expand...
Click to collapse
Sorry, I am on night shift and was getting some sleep..lol.. I used Gravitybox MM. It has almost everything in it that I need to make a stock rom custom..lol..
ratchetrizzo said:
Just installed this, flashed it and xposed at the same time, took 7 minutes to boot the first time.
Updating, reinstalling and debloating things I don't need now.
Seems faster than the debloated 5.02 rom I was on.
Will keep you posted after everything is done
Click to expand...
Click to collapse
Thats great... It takesk me 13 minutes on both ( plus or minus)... Every device will respond differently though so the boot times will vary. Thats Awesome.
glockman4519 said:
Thats great... It takesk me 13 minutes on both ( plus or minus)... Every device will respond differently though so the boot times will vary. Thats Awesome.
Click to expand...
Click to collapse
I screwed something up with a xposed module (I guess, everything was fine until I installed a power menu module and told it to reboot into recovery). No matter what I did, It would only boot into twrp. Even if I powered off and plugged the charger in, instantly twrp. Reflashing the rom did absolutely nothing, I had to odin stock then reflash this rom.
Ah well, live and learn with xposed.. I know not to install that power module lol
ratchetrizzo said:
I screwed something up with a xposed module (I guess, everything was fine until I installed a power menu module and told it to reboot into recovery). No matter what I did, It would only boot into twrp. Even if I powered off and plugged the charger in, instantly twrp. Reflashing the rom did absolutely nothing, I had to odin stock then reflash this rom.
Ah well, live and learn with xposed.. I know not to install that power module lol
Click to expand...
Click to collapse
I hear ya. Xposed is something I use only if I know the module. I never use test version (anymore .. lol) I did the same thing you did a whike back with some other mod.
The only mods I use are Gravitybox, Notify Clean, Xuimod, and sometimes either HK theme engine out Xtheme engine. Gravitybox has most all mods that I need built right in it including an advanced powed menus settings.
Also, when you were in that issue, did you try using the Xposed uninstall zip? That may have got you fixed up too.
glockman4519 said:
I hear ya. Xposed is something I use only if I know the module. I never use test version (anymore .. lol) I did the same thing you did a whike back with some other mod.
The only mods I use are Gravitybox, Notify Clean, Xuimod, and sometimes either HK theme engine out Xtheme engine. Gravitybox has most all mods that I need built right in it including an advanced powed menus settings.
Also, when you were in that issue, did you try using the Xposed uninstall zip? That may have got you fixed up too.
Click to expand...
Click to collapse
Well, even with gravitybox's reboot menu, if i have it boot me into recovery it sets the recoverybit and makes me reflash stock firmware.
so DON'T pick recovery from your reboot menu
ratchetrizzo said:
Well, even with gravitybox's reboot menu, if i have it boot me into recovery it sets the recoverybit and makes me reflash stock firmware.
so DON'T pick recovery from your reboot menu
Click to expand...
Click to collapse
I use it all the time. I just rebooted into recovery just before I responded here. Anyways there are also app on the p
Play Store that will reboot you to recovery too, like "Quickboot". I don't understand why this is giving you issues. What version of recovery are you on? There are problems with the 3.0.2.0. I used the other one on this forum 2.7.8.0.
glockman4519 said:
I use it all the time. I just rebooted into recovery just before I responded here. Anyways there are also app on the p
Play Store that will reboot you to recovery too, like "Quickboot". I don't understand why this is giving you issues. What version of recovery are you on? There are problems with the 3.0.2.0. I used the other one on this forum 2.7.8.0.
Click to expand...
Click to collapse
I'll go down to 2.7.8.0 and see how that works for me
Hi. Is here any possibility to play PoGo on jgcaap's CM14.1? What should I do? Any step-by-step tutorial? Thank you so much.
dasti555 said:
Hi. Is here any possibility to play PoGo on jgcaap's CM14.1? What should I do? Any step-by-step tutorial? Thank you so much.
Click to expand...
Click to collapse
Maybe the best you can do is to ask developer on how to bypass safetynet on his rom.
FSadino said:
Maybe the best you can do is to ask developer on how to bypass safetynet on his rom.
Click to expand...
Click to collapse
He don't want to do that because of security reasons.. Or something like that.
I cant play PoGO on CM13.1 by jgcaap either. I tried full unrooting with SuperSU, and before the Christmas update, I could play by just being unrooted. Now its a no go.
I assume that Niantic just made their anti cheating detection even more frustrating for non cheaters who just have a rooted phone. I don't like how they just assume that anyone who has custom android on their phone is automatically a cheater.
Oh so no chance okay :/ probably will play ingress or what
If you don't need root, you can try installing this one via recovery:
http://forum.xda-developers.com/showpost.php?p=63615067
It is just a little script, which removes all files and traces of the most common root-versions (SuperSU, phh's, ...).
It was that simple for me, after I tried bypassing Safetynet without success on CM14.1 for hours xD
Dstr8ction said:
If you don't need root, you can try installing this one via recovery:
http://forum.xda-developers.com/showpost.php?p=63615067
It is just a little script, which removes all files and traces of the most common root-versions (SuperSU, phh's, ...).
It was that simple for me, after I tried bypassing Safetynet without success on CM14.1 for hours xD
Click to expand...
Click to collapse
Nice one man, got it working on cm13 with this
Sent from my A0001 using XDA-Developers Legacy app
This is very easy to do just install Magisk 10.2 and enable Magisk Hide. You can also use the Miitomo module to play Miitomo and others to do cool stuff. It just got updated and it works great now. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Link_of_Hyrule said:
This is very easy to do just install Magisk 10.2 and enable Magisk Hide. You can also use the Miitomo module to play Miitomo and others to do cool stuff. It just got updated and it works great now. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
After installing RR 5.8.0 i cant run Pokemon go anymore even with magisk hide, please help
DarkLanternX said:
After installing RR 5.8.0 i cant run Pokemon go anymore even with magisk hide, please help
Click to expand...
Click to collapse
I don't even know what RR is. I run Lineage OS 14.1 and it works fine.
Link_of_Hyrule said:
I don't even know what RR is. I run Lineage OS 14.1 and it works fine.
Click to expand...
Click to collapse
RR is Resurrection remix ,its a highly customizable custom rom.
Btw how did u manage to run it? Only using magiskhide?
DarkLanternX said:
RR is Resurrection remix ,its a highly customizable custom rom.
Btw how did u manage to run it? Only using magiskhide?
Click to expand...
Click to collapse
I play it perfectly fine it works fine. But actually if you don't install root on Lineage OS 14.1 you don't even need magisk at all and Pokemon GO will work. Miitomo will not work without magisk because it checks for ro.debuggable = 1 however and it crashes. But for the most part since Lineage OS 14.1 passes SafetyNet unrooted or with Magisk you can use basically any app that uses it.
Link_of_Hyrule said:
I play it perfectly fine it works fine. But actually if you don't install root on Lineage OS 14.1 you don't even need magisk at all and Pokemon GO will work. Miitomo will not work without magisk because it checks for ro.debuggable = 1 however and it crashes. But for the most part since Lineage OS 14.1 passes SafetyNet unrooted or with Magisk you can use basically any app that uses it.
Click to expand...
Click to collapse
You should try out this rom, its pretty awesome. Idk i might be doing something wrong, before changing rom magiskhide worked for me... Even though safetynet failed I could run the game pretty well. But now i cant. Can u check out this rom please to see if you can bypass safetynet . Thanks in advance
Hmm, so I did my full wipe and fixed my mobile data bug. I've reinstalled CM13.1 by Jgcaap and then flashed the un-SU package to remove root. I just booted up the game and it keeps saying unable to authenticate. It worked before I did the wipes but I guess there has been updates to GO since then.
Any ideas?
Use this thread for questions, help and anything else about LineageOS that does not belong to the ROM development itself, thank you.
FAQs
Does LineageOS support VoLTE? YES
If I install LineageOS will I lose MotoActions? We have our own implementation of MotoActions configurable under Settings -> Gestures, so the answer is No
Your ROM is unrooted, can I install SuperSU? We discourage SuperSU usage, flash our su package (arm) and then enable root access from Settings -> Developer options.
Hi @Alberto97, thanks a lot for your precious work for osprey. Just wanted to know whether dual sim is properly implemented in lineage OS? As posted by some users dual sim especially data switch is broken.
samir.saurav said:
Hi @Alberto97, thanks a lot for your precious work for osprey. Just wanted to know whether dual sim is properly implemented in lineage OS? As posted by some users dual sim especially data switch is broken.
Click to expand...
Click to collapse
Data switch is not broken, simply when switching from wifi to mobile data sometimes you need a reboot to make mobile data working (it happened just twice here in months)
Hi @Alberto97 I was having Night Light in quick tiles in your 14 Dec Unofficial build but I can't see the tile in Official One??
drkhalidomer said:
Hi @Alberto97 I was having Night Light in quick tiles in your 14 Dec Unofficial build but I can't see the tile in Official One??
Click to expand...
Click to collapse
I did not release anything that day, that is a CM13 feature that is coming back anyway
Alberto97 said:
I did not release anything that day, that is a CM13 feature that is coming back anyway
Click to expand...
Click to collapse
Thanks @Alberto97 for the prompt reply ! Could be coz of some other mod I had flashed ! Can I expect that in future builds ??
Excuse me, but what is the route to turn off led on charge? (Didn´t see this thread and post same question on original)
I've already figured it out. From the search option - enter (ba) - Battery light - turn off
Fede79 said:
Excuse me, but what is the route to turn off led on charge? (Didn´t see this thread and post same question on original)
Click to expand...
Click to collapse
Settings -> Notifications -> Configure (gear icon in the top right) -> Battery light -> toggle the switch.
is audio fx operational?
I can't see any difference in audio.If it is not working removal from the builds is a good option or not?
Alberto97 said:
Use this thread for questions, help and anything else about LineageOS that does not belong to the ROM development itself, thank you.
FAQs
Does LineageOS support VoLTE? YES
If I install LineageOS will I lose MotoActions? We have our own implementation for MotoActions configurable under Settings -> Gestures, so the answer is No
Your ROM is unrooted, can I install SuperSU? We discourage SuperSU usage, flash our su package (arm) and then enable root access from Settings -> Developer options.
Click to expand...
Click to collapse
Hi I really appreciate your work. Although I would want to know if in future there will be an option to disable one SIM in dual SIM phones.
You have any idea how to disable single SIM?
Thanks
Can i dirty flash over unofficial build?
h0ttentot said:
Can i dirty flash over unofficial build?
Click to expand...
Click to collapse
No.. u cant..
Sent from my Pixel using Tapatalk
vj9716 said:
Hi I really appreciate your work. Although I would want to know if in future there will be an option to disable one SIM in dual SIM phones.
You have any idea how to disable single SIM?
Thanks
Click to expand...
Click to collapse
That feature generally relies on closed source qcom components though looks like motorola uses its own implementation. Additionally I have a single sim variant of osprey and I don't want to include anymore components that I can't test, I already did a big mistake with IMS/VoLTE support.
Are there problems with WiFi?
I have the (XT1543)
this rom have substratum support?
This may actually be a development question, but I'm going to err on the side of caution and post here first, then see if @Alberto97 thinks it's worth elevating to the dev thread.
I have an XT1540 2GB/16GB osprey on MetroPCS (T-Mobile MVNO reseller in the US), and I had successfully managed to get Pokemon Go working for several versions of the 7.1 releases.
Specifically using iSu by @bhb27 (thanks! ), which renames the su binaries when toggled on, and then puts them back when toggled off. No Xposed framework (I know, I know; don't even think about it near a CM development thread), no Magisk, no Chainfire or phh SuperSU... always making backups with Titanium Backup then restoring things one at a time (and re-doing system settings, not restoring) after a full wipe & clean flash. Using TWRP 3.0.2-r5 and a known-good MicroSD card.
Versions where I think it worked:
CM 14.1 (Dec 25 & 27 builds)
Lineage Unofficial (Jan 12, 13, & 14 builds - I know those were supposed to be for just the CDMA variant, but they also seemed to have the side effect of making the GPS and PoGo work again)
Versions where it hasn't worked:
LineageOS Unofficial (Jan 10 and before): Would NEVER get a GPS fix, no matter how long I left it running. GPS Status was able to get a location properly, even in device-only mode; it just wasn't passing through.
LineageOS Official (Jan 25): Gets a GPS fix, but seems to fail SafetyNet attestation, both with official root add-on from lineageos.org applied then hidden with iSu, and with a fresh install that doesn't even have the root add-on package installed.
Again, that's with internal storage/data/system/cache/dalvik/your mom all wiped and a clean install.
So, CM/LOS used to pass SafetyNet, at least well enough for Pokemon Go to successfully sign in with my Google account credentials, merely by renaming/deleting the su binaries. Now it doesn't. Is that due to how the add-on package applies root vs. how it was baked-in before? Any recommendations on what to try? I know it's not everyone's highest priority, but my wife & I enjoy playing when we go for a walk, so being able to continue doing a favorite activity on my favorite ROM is something I'd appreciate immensely.
Is there any way to record on 60fps like in Cm13?
If I flash this lineage rom using twrp , will I lose root access?? If yes, then how will I root again? Pls help... And what are the things which are not working in this rom..?
UtkKing said:
If I flash this lineage rom using twrp , will I lose root access?? If yes, then how will I root again? Pls help... And what are the things which are not working in this rom..?
Click to expand...
Click to collapse
Yes if you flash lineage you will not have root access as the ROM does not have root built-in. You have to flash lineage provided root zip or SuperSU 2.79+ after flashing ROM+Gapps.
UtkKing said:
If I flash this lineage rom using twrp , will I lose root access?? If yes, then how will I root again? Pls help... And what are the things which are not working in this rom..?
Click to expand...
Click to collapse
Hi, please read at least a few posts back before posting. Everything you asked is explained in OP. Thanks.
Hi guys.
When trying to use these type of ROMS I get one BIG problem. A program that uses BANK ID , when logging in to banks won't work anymore.
I think the file is named STK.apk. if I am not wrong.
On all the Stock (based) Custom Roms this operation work. But in AOKP,AOSP it doesn't. On stock based this program is White Color and after entering PIN code it disappears and log me into the bank.
But on AOKP,AOSP it is black, and it doesn't disappear it just times out after I enter PIN code.
Does anyone know a workaround or what can be the issue ? Someone mentioned that I should switch Kernel to fireopal 3.3 unofficial but that didnt work. I flashed Kernel in TWRP, maybe it should have been flashed in ODIN ?
Caligula. Peace Out
This will likely be due to a SafetyNet issue.
Where you rooted on stock? if yes with magisk or otherwise?
If you're still on aosp you can download this SafetyNet Helper Sample and see if you pass.
If you don't there are a few things you can do to pass it again.
jaannnis said:
This will likely be due to a SafetyNet issue.
Where you rooted on stock? if yes with magisk or otherwise?
If you're still on aosp you can download this SafetyNet Helper Sample and see if you pass.
If you don't there are a few things you can do to pass it again.
Click to expand...
Click to collapse
Hi , I did use SuperManRom and BatmanRom, I think they both were rooted yes, and they use Magisk 14 beta there I think.
I will try to flash an Aosp-Aokp Rom again and then try with this App you are posting. Thank you. Now I am on STOCK Samsung since I couldn't get this to work. I used KIES to go back to fabric base.
I will make a backup and then try
UPDATE : I have now flashed Lineage Os 14.1 and I haven't root and Safetynet fails. So first thing I need is root maybe ?
mrcaligula said:
Hi , I did use SuperManRom and BatmanRom, I think they both were rooted yes, and they use Magisk 14 beta there I think.
I will try to flash an Aosp-Aokp Rom again and then try with this App you are posting. Thank you. Now I am on STOCK Samsung since I couldn't get this to work. I used KIES to go back to fabric base.
I will make a backup and then try.
Click to expand...
Click to collapse
Magisk has the capability to root your phone without triggering SafetyNet but that is (at least it was for me) a pain in the ass to get it working correctly.
Another thing I did with Snapchat (also doesn't work if SafetyNet is triggered) is that I set up the App on a clean stock rom, then backed it up with Titanium Backup and installed it on the rooted/aosp/... ROM. Note: This also works if the SafetyNet check in the app is only executed when you first login.
Thanks for info
I get false on the first CPTID(something) the heaviest of the 2 checks on SAFETYNET the other one I get ok.
After I install Magisk 14.
But I am giving up. Can't really find a 100 % workaround for this.