Good Day guys
Before (if) I root, does anyone know if Xposed will run on the X2 ? If so, are modules safe to run from a security/privacy point of view ? Is it true that as long as modules are open source they are safe ?
elio321 said:
Good Day guys
Before (if) I root, does anyone know if Xposed will run on the X2 ? If so, are modules safe to run from a security/privacy point of view ? Is it true that as long as modules are open source they are safe ?
Click to expand...
Click to collapse
No, Xposed doesn't work. It will send you into a bootloop.
Hello,
... a never ending story with my GEM-702L ...
I've unlocked the bootloader, installed TWRP and updated to B106 inkl. SuperSU.
All works fine ... with one exception: XPosed. I *really* need it, especially for XPrivacy.
For Lollipop a new XPosed version is released. So i tried my luck ... and failed.
I installed the XPosed Installer 3.0 Alpha 4 and the ARM64 SDK22 framework via TWRP.
After that my device has a boot loop.
Has anybody other experiences with XPosed and is there a workaround to install XPosed successfully? Maybe with an Android 5.0 Build? I prefer to use an older build version if it allows to use the XPosed framework.
I hope you can help me.
Many thanks in advance and best wishes
Dan
dand751801 said:
Hello,
... a never ending story with my GEM-702L ...
I've unlocked the bootloader, installed TWRP and updated to B106 inkl. SuperSU.
All works fine ... with one exception: XPosed. I *really* need it, especially for XPrivacy.
For Lollipop a new XPosed version is released. So i tried my luck ... and failed.
I installed the XPosed Installer 3.0 Alpha 4 and the ARM64 SDK22 framework via TWRP.
After that my device has a boot loop.
Has anybody other experiences with XPosed and is there a workaround to install XPosed successfully? Maybe with an Android 5.0 Build? I prefer to use an older build version if it allows to use the XPosed framework.
I hope you can help me.
Many thanks in advance and best wishes
Dan
Click to expand...
Click to collapse
The problem is Xposed just doesn't support the framework on the Huawei devices just yet. Hopefully, since Huawei makes the Nexus 6P that will change but if it does it probably won't be until Marshmallow is released for the X2. Huawei is working on it.
Thank you for your reply.
With other words: I have an unusable smartphone. Without regulation of permissions, I won't use an android device with all of my personal data. My privacy is too important for me.
Huawei created a really great device but some details are horrible.
1st: Unlocking bootloader
2nd: Terrible (and in fact: no) support for international models
3td: This situation.
It seems, Huawei makes the same mistakes like other big manufactures before...
I'm looking forward for some better updates for the xposed framework and/or new builds from huawei.
Best wishes
Dan
Also boot loop with xposed framework v78 on B106.
So since Sep. 2015 I have an unuseable smartphone...
To trust in Huawei was my biggest (and expensive) fail since a very long time.
dand751801 said:
Also boot loop with xposed framework v78 on B106.
So since Sep. 2015 I have an unuseable smartphone...
To trust in Huawei was my biggest (and expensive) fail since a very long time.
Click to expand...
Click to collapse
The framework doesn't support Huawei phones. Maybe this will change with the Nexus 6P.
I know, but I really need xposed + xPrivacy.
So, I'll try every update til xposed is running fine ... Or I sell my MediaPad and buy something else that has not these problems.
you be doing well to sell this phone for what you paid for it.
I have posted Working Xposed for our X2 here:
http://forum.xda-developers.com/mediapad-x2/development/mod-xposed-framework-mediapad-x2-t3255963/post63982156#post63982156
ajsmsg78 said:
I have posted Working Xposed for our X2 here:
http://forum.xda-developers.com/mediapad-x2/development/mod-xposed-framework-mediapad-x2-t3255963/post63982156#post63982156
Click to expand...
Click to collapse
Could you make the same for 703L? Unfortunately this version do not work for me... It's a really pitty because Xposed it is one thing which I miss in X2...
I have installed .app and flashed .zip from recovery but after reboot Xposed framework is not active and can not be activated. At least there is no bootloop...
trurl3 said:
Could you make the same for 703L? Unfortunately this version do not work for me... It's a really pitty because Xposed it is one thing which I miss in X2...
I have installed .app and flashed .zip from recovery but after reboot Xposed framework is not active and can not be activated. At least there is no bootloop...
Click to expand...
Click to collapse
I'm on my 703L and its working fine for me. I had to install the app first then boot into recovery and install the framework in that order.
Will try once more...
Unfortunately...
What can I do?
dand751801 said:
I know, but I really need xposed + xPrivacy.
So, I'll try every update til xposed is running fine ... Or I sell my MediaPad and buy something else that has not these problems.
Click to expand...
Click to collapse
Well good news...."ajsmsg78" tested it working on X2 !
Go to:
http://forum.xda-developers.com/med...ediapad-x2-t3255963/post63982156#post63982156
trurl3 said:
Will try once more...
Unfortunately...
What can I do?
Click to expand...
Click to collapse
Flash the framework in recovery once more and see if it works. I did it on KangVIP B109. What system are you on?
I flashed it at least four times... I am on B109 Kangvip
trurl3 said:
I flashed it at least four times... I am on B109 Kangvip
Click to expand...
Click to collapse
That's strange. When you first flashed the Framework and restated did you get the "updating apps 1 of xx" dialog box?
Yes, I had it.
Now I'm back to start because I've restored nandroid backup from before of installing Xposed-framework. Will try once more from beginning. SO once more:
1. Xposed Installer.app
2. Xposed Framework from recocvery
Is there need of wiping cache after installing framework?
Edit// One more try to no avail.
Edit// Will try to install superslim KangVip from @ajsmsg78 and then will see...
trurl3 said:
Yes, I had it.
Now I'm back to start because I've restored nandroid backup from before of installing Xposed-framework. Will try once more from beginning. SO once more:
1. Xposed Installer.app
2. Xposed Framework from recocvery
Is there need of wiping cache after installing framework?
Edit// One more try to no avail.
Edit// Will try to install superslim KangVip from @ajsmsg78 and then will see...
Click to expand...
Click to collapse
After install, open up Xposed Installer and go into settings and check Disabled Resource Hooks. You have to do that in order for the framework to start working. Just restart after you check that box.
ajsmsg78 said:
After install, open up Xposed Installer and go into settings and check Disabled Resource Hooks. You have to do that in order for the framework to start working. Just restart after you check that box.
Click to expand...
Click to collapse
Thank you, that did the trick . Now I will start to test my favourite modules.
Related
Guys, every time I try to install Xposed for my SM-G920F (I´m 100% sure that I use the correct files every time), my device reboots after entering the pin code.
I had already flashed stock a completely new stock rom via Odin, Wiped Data/Factory Reset and installed XtreStoLite newest version.
Nothing helps.
I remember I did something wrong with "Kernel Auditor" in the past. (I think I done something with "Enable on Boot") Since then my device reboots every time I install Xposed.
I hope someone does have another Idea, I really miss xposed
Flash arter97 twrp recovery and kernel. Then flash wannam version of exposed for lollipop/ marshmallow.. And cheers*
kforkai said:
Flash arter97 twrp recovery and kernel. Then flash wannam version of exposed for lollipop/ marshmallow.. And cheers*
Click to expand...
Click to collapse
Thanks for the help mate, I followed your steps but still not working.
Xposed is installing successfull, but after I activate some xposed modules like Amplify or xTouchwiz the device reboots immediately.
I really don´t know what´s causing that.
Any other help, Im really pissed right now (sorry)
memocatcher said:
Thanks for the help mate, I followed your steps but still not working.
Xposed is installing successfull, but after I activate some xposed modules like Amplify or xTouchwiz the device reboots immediately.
I really don´t know what´s causing that.
Any other help, Im really pissed right now (sorry)
Click to expand...
Click to collapse
Im using sm-g929i mm6.0.1
Amplify doind good overe here. I coulndt get pass the samsung logo When I installed both xtouchwiz and xprivacy at the same time. Enabled both modules and the hp.
Solved that by pressing vol down, home and power. Release right away when the phone restarted.
So I updated my newer Shield Tablet to 4.1, and restored everything, flashed SuperSU and Xposed and Viper4Android.. It was working fine until I enabled some Xposed modules and rebooted. It gets stuck on the NVIDIA logo and nothing happens. I got it to boot once after flashing Xposed, but the app said that Xposed was installed but not enabled ("see the logs," which made no sense to me). It said there was an update to the app, so I updated it, then downloaded the zip once again and flashed it, and got the NVIDIA logo stuck again. This is horsh!t. Why is it suddenly not working? I'm using the latest, xposed-v85-sdk23-arm zip.
Bump? Been a day and no response??
GuyInDogSuit said:
Bump? Been a day and no response??
Click to expand...
Click to collapse
Maybe nobody knows HERE?
Xposed is working here with NVIDIA-Update 1.2 (6.0.1) without problems. Did the modules you installed work before the update? A bootloop is a common problem with Xposed.
I doubt that this is ROM problem but an Xposed problem. I would try to find help in the Xposed section. Maybe you should try to find the logs...
edisso10018 said:
Maybe nobody knows HERE?
Xposed is working here with NVIDIA-Update 1.2 (6.0.1) without problems. Did the modules you installed work before the update? A bootloop is a common problem with Xposed.
I doubt that this is ROM problem but an Xposed problem. I would try to find help in the Xposed section. Maybe you should try to find the logs...
Click to expand...
Click to collapse
No, it's a ROM problem. They worked fine before.
I'm also using the 6.0.1 update and the latest xposed with no problems. I'd say it's one of your modules not being compatible, not a ROM problem at all, except that the module doesn't seem to be updated to work on mm.
Sent from my SHIELD Tablet K1 using Tapatalk
Exile1975 said:
I'm also using the 6.0.1 update and the latest xposed with no problems. I'd say it's one of your modules not being compatible, not a ROM problem at all, except that the module doesn't seem to be updated to work on mm.
Click to expand...
Click to collapse
I use the same modules on my phone running 6.0.1, with no issues. It's not a module.
did you flash arm version or arm-64 version? cuz arm-64 and intel wont work and there is a systemless xposed try using that if all else fails. I can use xposed myself on 6.0.1 myself btw.
m666p said:
did you flash arm version or arm-64 version? cuz arm-64 and intel wont work and there is a systemless xposed try using that if all else fails. I can use xposed myself on 6.0.1 myself btw.
Click to expand...
Click to collapse
As I stated in the op, it's the xposed-v85-sdk23-arm zip.
Tried reflashing the ROM, the USA LTE version this time, and I'm STILL getting stuck at the boot screen, after enabling modules. I got it to boot with JUST Xposed, no modules.
GuyInDogSuit said:
Tried reflashing the ROM, the USA LTE version this time, and I'm STILL getting stuck at the boot screen, after enabling modules. I got it to boot with JUST Xposed, no modules.
Click to expand...
Click to collapse
As stated before, a module your using isn't updated to work with our implementation of 6.0.1. now reinstall modules one at a time until you figure out which one is causing problems and then ask in the xposed section for that module. Glad you finally figured it out tho
Sent from my SHIELD Tablet K1 using Tapatalk
Exile1975 said:
As stated before, a module your using isn't updated to work with our implementation of 6.0.1. now reinstall modules one at a time until you figure out which one is causing problems and then ask in the xposed section for that module. Glad you finally figured it out tho
Click to expand...
Click to collapse
Well, it was BootManager, but it's working fine on my phone with 6.0.1.
Nope, wasn't BootManager, either. Just not working, at all.
If anyone is having issues with flashing xposed I found a thread where there is universal systemless xposed now.
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
I'm going to give it a go even though I've never had issues with xposed, but it seems that with systemless root and systemless xposed you'll keep your OTA capabilities, but a few apps like Android Pay will not work. Make sure to read the whole thread and throw them a thank you for making this.
kingoftheafro said:
If anyone is having issues with flashing xposed I found a thread where there is universal systemless xposed now.
I'm going to give it a go even though I've never had issues with xposed, but it seems that with systemless root and systemless xposed you'll keep your OTA capabilities, but a few apps like Android Pay will not work. Make sure to read the whole thread and throw them a thank you for making this.
Click to expand...
Click to collapse
systemless xposed works fine (and seems to make the system lag less then regular xposed) however 86.7 is out and you need to also make sure you have the "material design xposed installer" installed as it's the only version that detects systemless xposed. The regular one will not do the job.
famewolf said:
systemless xposed works fine (and seems to make the system lag less then regular xposed) however 86.7 is out and you need to also make sure you have the "material design xposed installer" installed as it's the only version that detects systemless xposed. The regular one will not do the job.
Click to expand...
Click to collapse
Wow that was fast. I know about the installer which is why I said read who page lol. It has link and description for installer on the page.
famewolf said:
systemless xposed works fine (and seems to make the system lag less then regular xposed) however 86.7 is out and you need to also make sure you have the "material design xposed installer" installed as it's the only version that detects systemless xposed. The regular one will not do the job.
Click to expand...
Click to collapse
Just looked and there isn't an 86.7. You were looking at release 85.7. 86.1 is the most recent release for systemless xposed.
kingoftheafro said:
Just looked and there isn't an 86.7. You were looking at release 85.7. 86.1 is the most recent release for systemless xposed.
Click to expand...
Click to collapse
You are correct. I'm on 85.7 (initially had 85.1 and upgraded) so the newest IS 86.1
famewolf said:
You are correct. I'm on 85.7 (initially had 85.1 and upgraded) so the newest IS 86.1
Click to expand...
Click to collapse
How is 85.7? I'm going to be flashing 86.1 as a test for @The Marionette on the v2 version of his Material MM Rom
kingoftheafro said:
How is 85.7? I'm going to be flashing 86.1 as a test for @The Marionette on the v2 version of his Material MM Rom
Click to expand...
Click to collapse
Been running fine with all the modules I've used. Nowhere near as jerky a gui as the regular one was..I have NO idea why it would make a difference but that's my impression as well as @The Marionette's impression.
famewolf said:
Been running fine with all the modules I've used. Nowhere near as jerky a gui as the regular one was..I have NO idea why it would make a difference but that's my impression as well as @The Marionette's impression.
Click to expand...
Click to collapse
I'm currently on 85.7 as 86.1 wasn't recognized after installation 2 times by the installer. So far no issues with that, but with MM in general every now and then when I leave the phone for extended periods of time it won't turn back on when the power button is pressed. I've tried everything to keeping the cores full bore and it still happens like it's a deep sleep that it can't wake from and I have to restart the phone.
Dunno where else to put this but so far none of the unofficial xposed solutions support the pixel phones because no one seems to want to work with the A/B file layout so if anyone here wants to pick up a project id greatly appreciate that one and i know ive seen a number of others asking for it in different magisk and unofficial xposed threads. Thanks for reading my post and potentially contributing to a fairly noble cause.
Unknown if this is a pixel success. Anyone who knows please do reply.
https://www.xda-developers.com/official-xposed-framework-android-nougat/
alladinscastle said:
Unknown if this is a pixel success. Anyone who knows please do reply.
https://www.xda-developers.com/official-xposed-framework-android-nougat/
Click to expand...
Click to collapse
Doesn't support A/B partition layout yet. No version of xposed except magisk systemless will even flash and even then the magisk systemless xposed also doesn't seem to work right for pixel phones yet
KittyRgnarok said:
Doesn't support A/B partition layout yet. No version of xposed except magisk systemless will even flash and even then the magisk systemless xposed also doesn't seem to work right for pixel phones yet
Click to expand...
Click to collapse
The couple of xposed modules I tried seemed OK (Greenify, youtube adaway...). I just didnt like it because it seemed to break Facebook and Facebook Messenger Apps (caused constant crashes for some reason) and also broke SafetyNet too, which defeats the purpose of even using Magisk. But overall you're most likely correct the modules still need to be updated for Nougat.
Damn...and I was so thrilled when the Nougat version came out.
Guess I stick with rooted Oreo was thinking about reinstall nougat cause of framework but sounds like it's not that great for pixel
cgrimm9 said:
Guess I stick with rooted Oreo was thinking about reinstall nougat cause of framework but sounds like it's not that great for pixel
Click to expand...
Click to collapse
Yeah xposed was my main reason for rolling back but for me none of the modules were being read as properly activated. Its fine though because I have my custom ROM back since there aren't any for Oreo yet.
A thread at pixel xl is saying yes and no with various install methods
UPDATE: added pie controls from xposed to my pixel running RR ; )
Resolved: Systemless Xposed (SDK25) module in magisk now flashes and sticks without fail. Installing the modded Xposed provided in the module description allows the framework/app/modules to interface properly. With both the Systemless framework and the modded app all modules updated as of this month will work
If you haven't already replaced SuperSU with Magisk, do that.
ItWasAllIntended said:
If you haven't already replaced SuperSU with Magisk, do that.
Click to expand...
Click to collapse
Well, choice is good, choice is what it should be, glad I have a choice to use what I want.
SR5-SuperSU-v2.82-SR5-20171001224502
Sent from my Pixel using XDA-Developers Legacy app
piperx said:
Well, choice is good, choice is what it should be, glad I have a choice to use what I want.
SR5-SuperSU-v2.82-SR5-20171001224502
Click to expand...
Click to collapse
I highly recommend switching to magisk at least until we get a proper non magisk Xposed and this is coming from someone who has used SuperSU their whole life
KittyRgnarok said:
Resolved: Systemless Xposed (SDK25) module in magisk now flashes and sticks without fail. Installing the modded Xposed provided in the module description allows the framework/app/modules to interface properly. With both the Systemless framework and the modded app all modules updated as of this month will work
Click to expand...
Click to collapse
Works on Oreo?
xneuromancer said:
Works on Oreo?
Click to expand...
Click to collapse
No nougat only, Xposed is not supported on Android Oreo at all yet
Official Xposed for Nougat is out,
Anyone tried it out on Sony's Stock ROM (e.g. 32.4.A.0.160) ?
Seems like the most important Modules are/were already working [feedback from the Unofficial Nougat variant]: https://forum.xda-developers.com/xposed/unofficial-list-modules-nougat-xposed-t3639615
Let's see if it also works with the official one,
that keeps the ART, JIT, etc. optimizations - so things might be different
Yes, it works. Gravitybox & Greenify installed.
Duvel999 said:
Yes, it works. Gravitybox & Greenify installed.
Click to expand...
Click to collapse
which version are you using? I've tried a few times always with bootloops.
I tried it with stock odexed rooted 1.54 7.1.1 ROM and it worked fine with some of my modules , other modules did not recognize the zposed FX presence in the system.
Tried it on e6633 w/ fw 2.33 : Stuck at boot after the logos have disappeared.
Edit: it works perfectly, just take a hell lot of time to boot (~10mins)
crisout said:
which version are you using? I've tried a few times always with bootloops.
Click to expand...
Click to collapse
Xposedinstaller 3.1.2 apk
Xposed v88 sdk25 arm64.zip
( Download uninstaller also => latest version 2016)
Gravitybox_Nougat 7.0.0 Alpha 01
Booting took some time.
Now on latest A.1.54 firmware without Xposed.
Flashed it on 7.1.1 .154 (the newest)
All my modules are working fine (tho first boot took very long, some may mistake it for bootloops)
Duvel999 said:
Xposedinstaller 3.1.2 apk
Xposed v88 sdk25 arm64.zip
( Download uninstaller also => latest version 2016)
Gravitybox_Nougat 7.0.0 Alpha 01
Booting took some time.
Now on latest A.1.54 firmware without Xposed.
Click to expand...
Click to collapse
Thanks, how much did it take? 10, 15, 20 minutes?
5-10 minutes. Take care for a charged phone.
greenify 3.7 is not compatible with the new xposed framwork. I am using this modules on stock 32.4.A.1.54 : 1-bootmanager 2-ambient display xposed 3-gravitybox 4-xinsta 5-xperiafmwohs
Took 7.5 minutes on my latest custom kernel here on 32.4.A.0.160 (7.1.1), now let's see what this puppy can do
s.hossein said:
greenify 3.7 is not compatible with the new xposed framwork. I am using this modules on stock 32.4.A.1.54 : 1-bootmanager 2-ambient display xposed 3-gravitybox 4-xinsta 5-xperiafmwohs
Click to expand...
Click to collapse
@s.hossein what features of GravityBox are you using ? do they work ?
Will it take that long every time you boot the phone? Or just the first time?
Because I installed xposed and thought it wouldn't get past the loading screen at all on my Z5, so I uninstalled xposed again.
But if it's only the first time booting I might reinstall it.
Noisecake said:
Will it take that long every time you boot the phone? Or just the first time?
Because I installed xposed and thought it wouldn't get past the loading screen at all on my Z5, so I uninstalled xposed again.
But if it's only the first time booting I might reinstall it.
Click to expand...
Click to collapse
No only first time takes longer. Use updated Xposed if available.