First off all reboot ure phone. Then lock ure screen By pressing power button. Wait for 10 sec then turn on ure screen touch will be working but it will be sometime unresponsive. Now what u got to do is go to settings developer option and on force gpu2 rendering and reboot again touch will be working fine without any issues
Related
So I've had my fuze a little over a year now, no major issues. Used mostly energyroms, but about December time I switched back to a simple non-bloated stock rom for the stability.
Anyway today at work I was texting, and I press the power button to put the phone in standby. And the screen remains on and usable. I tried again and it would not go into standby (power button physically feels normal, it does not feel loose or abnormal.) So i let it sit for a few minutes, then i look at it and a message poped up asking if i wanted to turn the phone off (like as if i was holding the power button)so i press no, then it comes up again a few seconds later and aagain and again. So I soft reset the phone.
The phone resets but takes a LOT longer at the att/htc splashscreen, then it hangs at the htc screen and does not make it to the wimo screen, but instead an error screen saying:
"The device is unable to boot because you have either turned off the device incorrectly or tried to install an applicationa from an untrusted source, press SEND to reset your device or press any other button to cancel..."
I think it went through the hard reset this time because when it restarted it asked to calibrate the screen and install stuff. it resets again sometime after that, still takes forever at the splash screen and comes back up to the error, only this time no matter what button i press it wont go away and boot into wimo. It seems like none of my buttons work (they wont light up now) when i slide out the keyboard, it is not lit up like normally.
And heres the kicker, my only way to turn on/off the phone is to take out/put in the battery. As soon as I pop the battery back in the fuze turns on. Is my phone toast? Ive tried to hard reset and the phone does not reach the bootloader, it goes straight to the splash screen. Same with trying to reflash it from my comp, raphealwrapper cannot find my phone.
I've only recently encountered the exact same problem on my Touch Pro, but stock ROM and everything. As far as I can tell, our power buttons are busted and probably need to be serviced. One of the contacts must be stuck in the 'on' position somewhere inside :\ As a temporary fix, I've been using AEButton Plus and remapped double tap end call key to turn the screen off, and removing the stylus to turn it on.
I have a HTC Tilt 2 and the backlight in my screen does not work. When I power the device on the backlight would come on and the screen would be working perfectly but when it goes in hibernation mode or i press the power button for it to go in hibernation mode the backlight would turnoff on the screen and would never come back on. at times after a numerous amount of button pushing it would come on and sometimes if i continuously slide it up and down it would come on. I thought it would be a software problem so i installed the rhodium ram on it and the problem still occurs. What can i do to fix this and why is this happening?
I was changing the wallpaper and it gave me the "setting wallpaper" dialog, which lasted for a long time. I pressed home and the gallery stayed on the screen but with nothing in it, and I couldn't get out of it. The back button did nothing.
I force powered down and rebooted and now when it starts (rebooted several times) I get a black screen with the time, the unlock button and the bottom right panel showing the time, wifi and SD card status.
There is no touch response, no response to volume controls, if I hit the power button it turns off the screen and wont come back on. I can connect to USB and navigate the internal memory.
Anyone have any idea what to do? :/ Stock rom, nothing extraordinary on the device.
Hi friends
I am having this weird problem that after screen has turned off then turned on by power button the screen stops responding to touch. Remove memory card and reinsert or inserting data cable the screen will start responding after few seconds. tested on V21e, ICS and currently on CM10. Unable to use as daily driver. Help needed.
On ICS and GB the screen may stop responding after sometime of activity. On other hand on CM10 once active it will continue to respond until screen turns off.
CM10 allowed me user volume keys to wake up \. So after waking through either power or volume keys I keep pressing volume keys for screen to not turn off after 20 seconds the touch starts responding.
Stunningkun said:
Hi friends
I am having this weird problem that after screen has turned off then turned on by power button the screen stops responding to touch. Remove memory card and reinsert or inserting data cable the screen will start responding after few seconds. tested on V21e, ICS and currently on CM10. Unable to use as daily driver. Help needed.
On ICS and GB the screen may stop responding after sometime of activity. On other hand on CM10 once active it will continue to respond until screen turns off.
CM10 allowed me user volume keys to wake up \. So after waking through either power or volume keys I keep pressing volume keys for screen to not turn off after 20 seconds the touch starts responding.
Click to expand...
Click to collapse
Try installing a different kernel, it might solve your problem.
To install a kernel your phone must be rooted and you must have a recovery installed.
Ok so I recently went on vacation and my phone was submerged in water. That's happened before but this time, the next day my phone started acting as if as I was holding the power button down and bringing up the advanced reboot options. Hitting the power button would turn the screen of and function normally but this persisted for about a day. Now my power button doesn't respond at all. I double tap the screen to turn it on so I can still use the phone. I'm afraid of going into bootloader or recovery and somehow getting stuck. I do have and use adb I just haven't proceeded. Any ideas? I believe it's hardware more than a software issue but maybe a wipe or reset would fix it?