Does anyone knows how to perform how to flash my android tablet without usb debug?may usb port in my tablet is broken and it cant be resolder but it can be charge and when i petform a recovery mode in keys there is no recovery mode but the volume up,down and the power is working and my tablet has a pattern lock..pls brothers can you help?thank you and god bless to all...
Hi,
To better assist you, please post your device model number and I will guide you to where you may find your answer. Thank you.
Related
Hi,
My phone is bricked (totally dead+usb not detected+doesn't boot at all) because i formatted it without installing the new rom. (sp tool was taking too much time and I had to stop the process)
now the phone does not have a rom installed and I cannot boot to recovery mode aswell. everything is gone !!
and the biggest problem is that my pc has not been detecting the phone while it's plugged in via usb cable since i formatted it. :crying:
maybe, can i just install the rom in sdcard then i boot from it?
my phone is versus pioneer p1 ( a.k.a gionee pioneer p1)
Thanks.
Hello,
Welcome to XDA.
If your device doesn't charge, has no LED when plugged in, won't boot to any mode, no vibration when press power and PC gives no sound when device is connected then you are probably hard bricked, if that is the case you'll have to take it to a repair shop, there is a good chance they won't be able to fix it.
Try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help, good luck.
Hello.
I have a problem with my lenovo tablet
During flashing a older stock rom in, I selected incorrect rom and now the device doesn't boot.
Doesn't react to holding any combination of volume +/- and power.
Doesn't react to power button at all. If I plug it in to a charger, it doesn't show the charging animation.
SPFlashTool is unable to do anything after I pick the device, it sees it but is unable to flash it in. (I will attach logs after I get home)
Windows still detects a MT65xx Preloader after I plug it into a USB port. (I have removed the MTEK vcom USB driver since the flashing attempt)
Is the situation still salvageable? Can I somehow still give life back to my bricked device?
Thanks in advance.
Well, almost a year later I've bumped into the exact same issue.
Anyone knows how to solve this?
Damn...
----EDIT----
I've managed to sove this. Had to open the tablet and remove the cable that connects the battery. Once reconnected, the tablet was able to be powered on.
Mortvert said:
Hello.
I have a problem with my lenovo tablet
During flashing a older stock rom in, I selected incorrect rom and now the device doesn't boot.
Doesn't react to holding any combination of volume +/- and power.
Doesn't react to power button at all. If I plug it in to a charger, it doesn't show the charging animation.
SPFlashTool is unable to do anything after I pick the device, it sees it but is unable to flash it in. (I will attach logs after I get home)
Windows still detects a MT65xx Preloader after I plug it into a USB port. (I have removed the MTEK vcom USB driver since the flashing attempt)
Is the situation still salvageable? Can I somehow still give life back to my bricked device?
Thanks in advance.
Click to expand...
Click to collapse
i too have the same problem i tried to flash recovery by unlocking bootloader
but in turn it was unable to boot now its just a paper weight it does not even shows charging logo anything simply dead
is there any fix i really need it please someone
Bricked Lenovo Tab 2 A7 10F
I was trying to flash TWRP and get my Lenovo Tab 2 A7 10F to root but during the process i don't know which scatter file i chose since it the scatter files were more than 1.
So i tried one by one all of the three scatter files and tried to flash but I don't know which scatter file i chose. So i removed the USB from my tab since the bar at the bottom wasn't progressing and now the tab won't turn on.
KINDLY SUGGEST ?? :'( :'( Otherwise my dad go angry on me. PLEASE !!! PLEASE !!! PLEASE !!! PLEASE !!! SOMEONE SAVE ME _/\_
---------- Post added at 07:09 AM ---------- Previous post was at 06:57 AM ----------
Typhus_ said:
Well, almost a year later I've bumped into the exact same issue.
Anyone knows how to solve this?
Damn...
----EDIT----
I've managed to sove this. Had to open the tablet and remove the cable that connects the battery. Once reconnected, the tablet was able to be powered on.
Click to expand...
Click to collapse
How did you managed to do that when the tab has a non-removable battery ??? I have a Lenovo Tab 2 A7-10F
Doggo_Meme said:
How did you managed to do that when the tab has a non-removable battery ??? I have a Lenovo Tab 2 A7-10F
Click to expand...
Click to collapse
I just opened the back cover and disconnected the battery cable. I didn't remove the battery.
Anyway, you can search youtube for videos that shows you how to open the back cover.
Cheers!
Thanks for the help!!! had the same issue
Mortvert said:
Hello.
I have a problem with my lenovo tablet
During flashing a older stock rom in, I selected incorrect rom and now the device doesn't boot.
Doesn't react to holding any combination of volume +/- and power.
Doesn't react to power button at all. If I plug it in to a charger, it doesn't show the charging animation.
SPFlashTool is unable to do anything after I pick the device, it sees it but is unable to flash it in. (I will attach logs after I get home)
Windows still detects a MT65xx Preloader after I plug it into a USB port. (I have removed the MTEK vcom USB driver since the flashing attempt)
Is the situation still salvageable? Can I somehow still give life back to my bricked device?
Thanks in advance.
Click to expand...
Click to collapse
Hey, i was in the same problem some weeks ago.
I finally figured it out after spending 2 nights continuously, so here is what you need to do.
1. Carefully open the back cover of your tablet and find the square connector which connects the battery and disconnect it.
2. Now download the stock Kitkat rom for the tablet from xda.
3. Install vcom drivers for mediatek 65xx.
4. While the connector is removed plug the cable to the computer or laptop.
5.Then connect the mini usb to your charging port (Again the connector should not be attached to motherboard).
6. Load scatter file in sp flash tool uncheck preloader, MBR and SEC_RO.
7.Then hit the start button and wait for it!
8. Now remove the cable, attach the battery connector to motherboard. AND BOOT!!!:good::good::victory:
If this help you please give a thanks.
hello friends I have a problem with my samsung tab 2 SGH - i497 when trying to install a custom recovery through the application Install TWRP , now my tab will not start, or load, nor can enter into recovery mode or download mode , please ayudenme I can do to fix it .
Hello,
If your device will not charge, will not boot to any of its modes, has no LED when connected to charger or PC, does not vibrate when power is pressed, will not connect to PC or is not recognized by PC, then unfortunately the device is probably hard bricked and is dead.
There is a chance that a Samsung USB Jig will help you boot it to download mode, they can be found on eBay for $3-5 US. If you get a Jig, insert it in the microUSB port on the device, if it works, it will force the device into download mode and you can then connect to PC and flash your stock firmware or possibly only the stock recovery to replace the custom recovery that bricked your device to recover the device if you are lucky. There may or may not be some other steps required after getting the device recovered to get it correctly repaired, or you might get lucky.
If that doesn't work, then your only other option is to send it in for JTAG service at the repair shop of your choice, you can find them with a Google Search.
Your device probably has a locked bootloader, as do most Samsung devices in the past 2-3 years. Attempting to flash these devices with locked bootloaders with anything other than the devices' current stock firmware or newer results in a permanently bricked device, some can be recovered but not in all cases.
In the future, regardless of how familiar you are with android and flashing, always familiarize yourself with these kinds of details about your specific model number before you do anything to your device. Good luck.
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
luishuiza said:
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
Click to expand...
Click to collapse
Try something like this along with the USB jig.
Samsung Tab USB adapter
Connect the adapter to your Tab then connect the USB jig to the adapter. If the jig is going to help you that will work.
Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Eleonora67 said:
Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find any information for your device on xda, try asking here
https://forum.xda-developers.com/android-stick--console-computers/help
hopefully the experts there can help
Good Luck
Sawdoctor
ok i'll try
thanks
I am able to connect my phone (lenovo vibe c2 k10a40) to my computer and use ADB, then type in fastboot oem unlock. However, when I try to use my Volume Up button in order to select to unlock the bootloader, it wont work. Only the Volume Down button is working, which cancels the command. I am doing this in order to get a custom recovery and in turn get CyanogenMod working. I've been working on this all day and have found no solution. I would appreciate any help.
I'm sorry for my English, I'm brazilian
tafds163 said:
I am able to connect my phone (lenovo vibe c2 k10a40) to my computer and use ADB, then type in fastboot oem unlock. However, when I try to use my Volume Up button in order to select to unlock the bootloader, it wont work. Only the Volume Down button is working, which cancels the command. I am doing this in order to get a custom recovery and in turn get CyanogenMod working. I've been working on this all day and have found no solution. I would appreciate any help.
I'm sorry for my English, I'm brazilian
Click to expand...
Click to collapse
Try connecting a USB mouse to your device, you will need an adapter or an OTG cable to use it, you can use the mouse to make your selections instead of the volume buttons..
If you need to be connected to more than thing, you can connect a USB hub to your phone then connect to the things you need.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Try connecting a USB mouse to your device, you will need an adapter or an OTG cable to use it, you can use the mouse to make your selections instead of the volume buttons..
If you need to be connected to more than thing, you can connect a USB hub to your phone then connect to the things you need.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Otg not work in fastboot
Any news about how to "press VolumeUP" in fastboot ?