ok so im working on a wireless project, and there is 1 thing i need to check into...
let me start by saying what i have, and the goal....
1. I am using a "Router/Wifi AP" that has no internet, but it has a laptop connected to it... side note: Laptop has DHCP service..
2. Laptop produces a camera feed.. that streams to a IP (android cellphone) over UDP inside the "internet-less local area network";
ok, so the goal is to "connect to the wifi device without losing cellular data (to access google maps and other APIs)"
PROBLEM: when i connect to WiFi(internet-less local area network) on android device,, it does not use Cellular data to connect to internet/APIs
is there any special network ranges that allow the android device to connect to cellular data when connected to a wifi(with no internet)?
Related
Hello This guide is made up from the knowledge i have build up from advice given on XDA and information on other sites.
I have found this very useful in my home and hope you do to.
First off, this guide explains everything you need to do to use your diamond as the access point to the internet at home for all devices. (PC's, PS3, XBOX360, Wii)
It is highly recommended that you have a unlimited data allowance!!!!! Otherwise you could have a hefty bill at the end of the month.
Right what you will need :
A WM6.1 Device (I used a Diamond) with an unlimited data allowance tariff,
A WiFi router (i have used an old router that was installed with Tiscali BB)
WMWifiRouter version 0.80 (please find this your self i will not provide it)
and some basic knowledge of networking on PC's and your devices.
Thats it. Please don't be put off by the networking side of things its really easy to do.
Right first off we need to get your diamond taking to your router.
switch on your router and let it do its thing for 2-4 mins
Connect your diamond to the wifi router by switching on your wifi in settings, communications on touchflow, when prompted, connect to your router and enter your network key.
THIS IS THE SAME PROCESS AS CONNECTING TO A WIFI HOTSPOT.
Its that simple.
Next switch off your wifi in settings, communications.
Install WMWifiRouter version 0.80 (Simple and stable)
once installed open WMWifiRouter and press connect.
This should then setup your phone to be used as a access point and connect to your wireless network all at once.
Once it says connected you can turn off your phones main screen by pressing the off switch at the top and put your phone where there is best signal! HSDPA is needed to get up 7.2mbps (little H in signal area)
Right now you need to setup your laptop or device to talk to the phone via your router!
So here are the settings you need to setup in either TCP/IP (manual connection) or a manual connection on your device (PS3, Wii, XBOX360).
I will use a laptops connection as a example because all you need to do is to copy the settings to another device using a different IP address.
If you use wifi or a hardwired connection, right click the telly with the wifi connection in the bottom right of the screen and click open network connections (XP only dont know for vista), Or if the telly is not displayed in the bottom righthand cornner of the task bar then click start, control panel, network connections.
Click on the connection you wish to use i.e local area connection or wireless network connection (you can setup both connections by repeating these steps on each connection)
this should bring up a general tab of this connection, click properties.
This will bring up another box with the network properties, all you need to do is manually enter your IP settings and DNS settings so double click on "internet protocol [TCP/IP]"
Another box appears.
Click "use the following IP address"
In IP address type "192.168.0.xxx" xxx being the unique 3 digit code of your choice, write this down for your firewall settings on other devices if you run a networked drive etc. Each new device will need its own unique 3 digit code ie PC = 192.168.0.100, XBOX360 = 192.168.0.200, Wii = 192.168.0.123 etc.
In Subnet mask type "255.255.255.0"
In Default gate way type "192.168.0.1
Now click "Use the following DNS server address"
In preferred DNS server type "192.168.0.1"
Thats it, press ok and ok on any other boxes still left open.
Your network device will rest your IP and DNS settings to the ones you have just entered, thus allowing you computer to access the mobiles phones internet connection via your router
On all your devices Manually setup all your connections using these settings and they will all use your mobile phone to connect to the internet.
Using DHCP to configure your network is not advised as its unreliable at finding your phones connection.
Now if you want to start using your phone as a phone again, open up WMWifiRouter again if its not already and click options Quit.
To get internet access on other devices via your phone again all you need to do is to start WMWifiRouter and press connect. Start using the internet!!!
If you wish to use your laptop on another hotspot, you will need to reset the TCP/IP settings back to automatic, otherwise it will not work.
Using this process sometimes causes the phone to disable its own internet connection, so a soft reset after exiting WMWifiRouter is recommended.
Have fun, im sorry if its all a little messy but i have never been very good at writing these guides.
If any modd wants to add or edit this post then please feel free. any persons wanting to add to this guide please do so.
Yes i know you can connect your phone to your laptop by USB, Bluetooth, but this method allows multiple devices to use the same phone to access the internet at the same time and via a access point at the highest possible speed, so games consoles can use it!!! Brilliant if you get a good HSDPA signal and live in the country.
Oh one last thing! if you are a youngster and wish to try this, please do so on other equipment, don't use your family's main router and laptop or PC unless its no longer in use!!!
Thank You
Hello Experts,
I am not a super expert but working on it on own interest basis.
My situation is,
I have one broadband connection thru ADSL+wireless router.
Normally my PC & other android devices at home are connected to wireless router of broadband.
Sometimes, this broadband connection fails for a couple of days.
I have one Android 6.0 mobile device which have unlimited data plan, but other android devices like mobile, Tabs does not have data connection.
During that time,
I create a hotspot & share to other wireless devices, but my PC does not connect until I connect thru USB tether.
Is it possible ??
To make a bridge in android 6.0 MM, between data connection & wi-fi ?? (I will connect it to wireless router with out hotspot), & set the DNS & gateway manually in the PC & wireless router.
What I have already done
Connected my mobile having data conn to win 10 PC with USB tether & PC is also connected to adsl router thru LAN.
Now,
I have checked the address of USB tether network IP (192.168.XX.XX), gateway (192.168.XX.XX) & DNS (192.168.XX.XX).
Then I created a bridge connection at PC between ADSL LAN & Tether Connection. Set above mentioned IP, gateway & DNS at created bridge connection.
Then I logged in into ADSL router,
Changed its IP from 192.168.1.1 to 192.168.XX.XX ( matching with USB tether conn except last digit).
Then I connected all my android devices to ADSL router wireless network & manually set the DNS address to every network same as USB tether DNS.
profit :
Not much, But I am getting a strong wifi network signal from ADSL compared to mobile hotspot & all my devices connected to internet being at different places of home with different people.
My above query was to get rid of USB tether in this situation.
Thank you for reading all above & suggestions if any.
[email protected] said:
Hello Experts,
I am not a super expert but working on it on own interest basis.
My situation is,
I have one broadband connection thru ADSL+wireless router.
Normally my PC & other android devices at home are connected to wireless router of broadband.
Sometimes, this broadband connection fails for a couple of days.
I have one Android 6.0 mobile device which have unlimited data plan, but other android devices like mobile, Tabs does not have data connection.
During that time,
I create a hotspot & share to other wireless devices, but my PC does not connect until I connect thru USB tether.
Is it possible ??
To make a bridge in android 6.0 MM, between data connection & wi-fi ?? (I will connect it to wireless router with out hotspot), & set the DNS & gateway manually in the PC & wireless router.
What I have already done
Connected my mobile having data conn to win 10 PC with USB tether & PC is also connected to adsl router thru LAN.
Now,
I have checked the address of USB tether network IP (192.168.XX.XX), gateway (192.168.XX.XX) & DNS (192.168.XX.XX).
Then I created a bridge connection at PC between ADSL LAN & Tether Connection. Set above mentioned IP, gateway & DNS at created bridge connection.
Then I logged in into ADSL router,
Changed its IP from 192.168.1.1 to 192.168.XX.XX ( matching with USB tether conn except last digit).
Then I connected all my android devices to ADSL router wireless network & manually set the DNS address to every network same as USB tether DNS.
profit :
Not much, But I am getting a strong wifi network signal from ADSL compared to mobile hotspot & all my devices connected to internet being at different places of home with different people.
My above query was to get rid of USB tether in this situation.
Thank you for reading all above & suggestions if any.
Click to expand...
Click to collapse
Yez and yes, search Hack5 in youtube and find the video relating to wifi pineapples( the bridge/router) and you will find everything you need , along with EasyTether pro(works fully tested to bypass tethering restrictions) . I dont know how the pineapple/router works but I know EasyTether uses adb to take and make a usb tethered connrection, then with a moderate-advanced setup(ie. wifi pineapple) you will be broadcasting wifi to any device you need. The only downside is you have to usb tethr to the pineapple at all timez to make a usable wifi,So in my opinikn best to buy anothr $45 a mnth plan especially 4 tethering, tho Im just now switching to a ISP for my internet it did the job, i even freelanced for awhile all remotely using the hotspot/created wifi/bridged connection.Hope that hellps brutha
Th
Tks...Bro...
I did it long before without spending a single penny.
I simply used network hack and bluffed the pc and other devices...It is working like charm....
I'm trying to find the URL and/or process used to detect if a Android (7.1.1/7.1.2) has connectivity to the internet.
For instance, I'm connected to wifi at a airport, and confirmed that I have authenticated, however, Android detects that it isn't connected to the internet. What does Android connect to in order to verify if it has internet access, and what service is it using?
I have an RV that allows me to control everything their their app as long as I am connected to the RV's local WIFI network (which doesn't provide internet).
It is obviously a terrible design as I cannot access the internet if I want to stay connected to it.
I know that about the "Switch to mobile data" option, but this doesn't work as this disconnects me from that WIFI connection. So that means I actually have to put the connection as a "Network exception" if I want it to stay connected.
Is there any work around to stay connected to a WIFI connection, but use mobile data when on that connection?
(Samsung note 10+ Android 12)
Always thought
a carrier's cellular network ( a radio network distributed over land ) is used when sending / receiving mobile data,
an internet service provider's network ( accessable via router / access point ) is used when sending / receiving data to / from internet.
All Android apps have a default network. The system decides which should be the default network.
It depends on app's configuration what connections - if available - are to be used - even simultaneously.
My android phone is usually on wifi at home. My laptop has some wifi chip/antennae issues so I have to either connect to the network via a lan port or, alternatively, use android phone usb tethering. If I am connected via the latter, on the laptop I observe that I cannot connect to the router network - I cannot even access the router login page.
I don't know a simple term for this feature. I guess it works like a network switch. But is there any app that, when enabled would help me connect my laptop (when usb-tethered) to the wifi network?