Related
I not long got a new samsung galaxy s 2. iv rooted and overclocked. it was all working well for a week but now none of my rooted apps can acces root and my superuser tells me...
AN ERROW OCCURED AND SU WAS NOT UPDATED - A ZIP FILE (SU-2.3.1-BIN-SIGNED ZIP) HAS BEEN PLACED ON YOUR SDCARD PLEASE REBOOT INTO RECOVERY MODE AND FLASH IT TO UPDATE YOUR SU.
Please someone tell me what i need to do.
If you are on a custom rom press and hold power and then press recovery. Or open rom manager and boot into recovery. If you do not have either, reboot the phone while holding both volume keys and power. Then, while in CWM recovery, use the volume rocker to navigate to "install .zip from sdcard" use power to select. Then scroll down to the zip file (SU-2.3.1-BIN-SIGNED ZIP) and select it. Then select yes to flash and watch.
Iv just finished doing that. this is what happened
E :FAILED TO SEEK IN /TMP/SIDELOAD/PACKAGE.ZIP
(INVALID ARGUMENT)
E: SIGNATURE VERIFICATION FAIL
INSTALLATION ABORTED
IV ALSO RESTORED FACTORY SETTINGS BUT NOTHING
?????????
someone please post me an answer????????
Try doing a factory reset and then rooting again with a different root method. Use either superoneclick root or gingerbreak
Have any luck?
This is the method to root Micromax Funbook & install CWM recovery.
1) Download the attachment funbook.rar
2) Extract it , it contains CWM recovery & CWM-SuperSU.zip two .rar files
3) Extract CWM recovery to desktop & connect your funbook via usb
4) If the device is not detected then install the ADB driver in the attachment
5) open CWM recovery run Recovery-Install.bat
it has 3 option select 1 to install CWM recovery
select 2 to reboot into recovery
select 3 to quit.
6) then move CWM-SuperSU.zip to internal sd of funbook
7) boot into CWM recovery by pressing menu button & power button simultaneously.
8) select install zip from internal sd card & select the CWM-SuperSU.zip & press power button, select yes to continue.
now you are Rooted
Before installing any custom rom perform a NANDROID backup.
This method is successfully tested by me however use this at your own risk!
How exactly is CWM recovery supposed to be installed on the tablet?
just run the Recovery-Install.bat with micromax funbook connected & ADB driver installed on your computer, it will autometically install CWM recovery on your funbook.
Funbook is Pre-Rooted. No Need to root it again.
Thank You
Thank You..
I Love you...
not working
Its say system remount failed, could not copy recovery image
Please help me I want to install custom rom ,
I am using micromax funbook
Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.
pls help
when i run recovery-install.bat
permission denied can somone pls help
I am Getting The following error
remount failed: Operation not permitted
failed to copy 'recovery.img' to '/data//recovery.img': Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Problem with installation of CWM on Funbook
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.
help me
dushmanta.bgh said:
Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.
Click to expand...
Click to collapse
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it
JetMOD 5.0.1 stuck on Funbook logo, u may tru FunSeries or CyanBook for micromax funbook.Hit Thanks button
For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
INSTALLING CUSTOM RECOVERY
1. Download CWM Recovery 5 ICS.zip
2. Extract it.
These are the requirements fo Flash CWM...
- tablet must be running Android ICS version (4.0.x)
- tablet must have Superuser installed with SU binary loaded
- tablet must have Debugging enabled (ADB drivers included)
Your Funbook is Pre-Rooted, so we'll just proceed with installing Superuser App from Market
3. Go to Play Store and download Superuser.
4. Go to Superuser App > Settings > Su Binary > Install the Binary
5. Reboot.
Now we'll enable USB Debugging
6. Go to Settings > Developer Options > Turn On USB Debugging.
Now we'll increase the screen timeout to prevent screen from getting turned off in the middle of these procedures
7. Go to Settings > Display > Select Never at Sleep.
8. So now connect the USB Cable to your PC and Funbook and you should see USB Debugging Connected notification.
At this point, if this is your first time, you may see Windows trying to find Drivers which will fail ofcourse. Go to Device Management [Press Windows Key + R > Type devmgmt.msc] > Right Click on Unknown Devices > Update Driver Software > Browse My Computer for Driver Software > Both 64bit [Drivers-AllwinnerA10-64bits] and 32bit [Drivers-AllwinnerA10-32bits] Drivers are provided there within a folder named ADB_Drivers under the Recovery Package, so just browse them according to your OS Specification. A screen may appear up saying "The Publisher of this Driver could not be verified", just ignore that and "Continue Anyway".
9. DO NOT TURN ON USB STORAGE. LEAVE IT AS IT IS.
Time to install CWM. There are two methods. One is easy, by running a script and another is using ADB by typing commands. You'll get an _Instructions.txt there which lists both the methods in case you want to try out the 2nd method. Here I'll only cover the easy one i.e. using Script.
10. Run recovery-install.bat [Windows] / recovery-install.sh [Linux] and press any key and just wait and watch the show
11. Within few mins recovery will be installed.
To reboot in Recovery Mode -> Press Options Key and by keeping it pressed, Press Power Key. Release Power Key and then Release Options Key.
12. Reboot.
Code:
=======================================================
| How to control ClockworkMod Recovery 5 |
| |
| VOL+: up |
| VOL-: down |
| POWER: select |
| BACK: back |
=======================================================
Credit goes to tkin
HAVING PROBLEM WHILE INSTALLING CWM?? GETTING PERMISSION DENIED ERROR??
Ok, for those who cannot install CWM from the normal steps(most probably new funbook users having Base 1.2 and ICS 4.0.3) follow these steps.
1. Install Superuser from playstore, update binary, you'll notice it will fail one part(red text), re do the update 2,3 times staright away until all the text become green, no need to reboot phone, but you might want to.
2. Install Android terminal from playstore, in terminal put su and press enter, if you get a warning allow it, if # comes you have root access. If not, re do step one. Don't continue till you get this step correct.
3. Download ES File manager from playstore, go to settings, allow all root access related options and also tick go upto root option.
4. Now start ES file manager, go to root, long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steaps for nandg file.
5. Allow USB debugging from dev options, connect the cable, install drvers.
6. Run the ICS recovery script, wait for it to finish, if it fails then you need to check and set permission again, if all goes well you have successfully installed CWM.
Warning: When setting permissions in ES File Manager make sure the USB cable is not attached, if so it might cause a hard crash and brick the device.
I had used this method to flash CWM on mine and on my friends device, both Base 1.2 and ICS 4.0.3(made in may 2012, the rom build no is: 97F1-D1-H2-H01-MMX.20120512) hence I think funbooks made after may 2012 must use this method, otherwise the script will fails due to permission denial.
Click to expand...
Click to collapse
Worked like a charm for me after setting permissions... Good luck..
Guys try the new Rom
http://forum.xda-developers.com/showthread.php?p=28353648
Sent from my HTC Desire S using xda app-developers app
sudhirrawal20 said:
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it
Click to expand...
Click to collapse
If you want Custom to Jetmod you have to flash yuor ROM into ployer Momo9 Based ROM...
Please use search tool forum before asking question like this.
sukhjit321 said:
For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
Worked like a charm for me after setting permissions... Good luck..
Click to expand...
Click to collapse
dude 'm suck wit a problem!!
I can't change permission of nandg. file and the file name on my funbook is '2012nandg'
I time root browser es explorer
help!! and es explorer gives me on root access to change permission
how to root?
Micromax Funbook ICS 4.0.3 how to root it?
guys i had lots of troubles in installing custom recovery so i tried sparky root but that crappy app can only unroot.
after that i cant update su binary.so used superoneclick it can only root 2.2 and 2.3 now am stuck with rooting.
please guide me to root funbook
neo.abyss said:
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.
Click to expand...
Click to collapse
Try this:_
Right click on 'recovery-install.bat' and run as administrator.....
Unable to install recovey on funbook
Is there anybody to help, i am getting the same error while trying to install recovery on my funbook....
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied to install a custom rom...
this is the easiest way to root
1)download this super user by chainsDD on you funbook
2)open it and update you binary from it and you r done
installing cwm is easy use this guide
Steps for Rooting
-download framroot(Download link given)
2-install framroot
3-Open framroot
4-You have to select install supersu
5-then select gandalf exploit wait for few seconds a
pop up message comes sucess ..........
6-do nothing the phone will reboot itself when the
phone turns on u will see super su is installed and u
have ur xperia m rooted
note: some time ur phone will b rooted with the first
attempt but i had tried these steps 3 times to get
rooted my xperia m for the first time(actually my friends xperia m) . but
some time u will get rooted ur phone with single
attempt so dont worry
-thats it....your xperia m is rooted sucessfully
Installing Busybox
1-download busybox
2-install busybox and open it wait for some time and
grand super su request
3-wait for some time busybox loads tweaks after
loading completes there is a install button on bottom
left corner click install then choose normal
4-busy box installs tweaks after compleation of
installation sucess popup message comes
5-installation of busy box is sucessfull
note:some time the phone will reboot in between the
busybox installation dont worry follow from the 3rd
steps. this is because of the system folder read write
error
-Done
Downloads
FRAMROOT>http://hotfile.com/dl/235017958/2abe894/
Framaroot.apk
Reserved For Changelogs
New download link
http://mediafire.com/?c5t0lav9j8e9tfh
I got this method sent to me and I shared it apparently only doing the first two steps installing framaroot then busybox it's only half rooted and requires another step here is the link for the method I was shown
http://forum.xda-developers.com/showthread.php?t=2457174
Sent from My Sony Xperia M C1905
dunc4n88 said:
I got this method sent to me and I shared it apparently only doing the first two steps installing framaroot then busybox it's only half rooted and requires another step here is the link for the method I was shown
http://forum.xda-developers.com/showthread.php?t=2457174
Sent from My Sony Xperia M C1905
Click to expand...
Click to collapse
Gud work
Pls can anyone help me to unlock the bootloader of samsung galaxy e700h along with its rooting process......
And suggest some custom roms
Ultrax Drago said:
Pls can anyone help me to unlock the bootloader of samsung galaxy e700h along with its rooting process......
And suggest some custom roms
Click to expand...
Click to collapse
Hey! there buddy..
For rooting have you tried the farmaroot app?? i've used it two times n that too with a success
Rooting:
Note:Rooting voids the warranty of the device...proceed at your own will!!
1.Download the farmaroot apk from the attachments. (present at the end of the post)
2.copy it to your device and install it. Note:Make sure u have unknown sources checked in your app settings in your device.If so proceed to step 3.
3.launch farmaroot and click install super SU.
4.Choose an exploit (for ex:Boromir)Note:if root fails, select another exploit from the dropdown and try again.
5.If It is successfull a message will popup saying "Success, installed superuser restart device".
6.Reboot the device..and woola!! ur phone is rooted.
100% success is not promised!!
Possible Cases --->
1."Success ... Superuser and su binary installed. You have to reboot your device"
2."Failed ... Exploit work but installation of Superuser and su binary have failed"
3."Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root", happen when the filesystem in use on system partition is a read only filesystem (ex: squashfs)
4."Failed ... Try another exploit if available"
5.Framaroot crash or freeze, in this case relaunch Framaroot a second time and select the same action and exploit.
Unlocking Bootloader
And coming to unlocking bootloader...i'am making a pc soft...it wud be most probably ready by tomorrow!!...i'll post it tomorrow....install it and unlock the bootloader.. i hope you are using Windows??
here you will find how to root and unroot your galaxy core prime VE.
DON'T try it on other variants, this is only for the G361H.
DO THIS at YOUR OWN RISK, I'm NOT RESPONSIBLE FOR ANY DAMAGE HAPPENS TO YOUR PHONE
It's prefered to use the TWRP method..
How To Root:
Method 1 : pre- rooted rom
1-Get the pre-rooted ROM from here
2-Download Odin 3.09.
3-If the ROM file that you downloaded is in .ZIP format extract it.
4-Extract Odin.
5-Run Odin as administrator.
6-Put the ROM in the AP field.
7-Put your phone into download mode, Power off the phone then use the three button combo to do that (power+home+vol down).
8-Press vol up.
9-Connect your phone to your PC using the USB data cable.
10-Once Odin detects your phone (it'll show a yellow box), press start.
11-The flashing operation will start, it might take upto 5 minutes depending on your PC's CPU speed.
12-The phone will reboot multiple times, it's normal.
13-The first reboot will take long, it might stay long on the Samsung logo or on optimizing apps, it's normal to take up to ten minutes.
14-Check your root status using any root app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#notice: apps stored on SD might be temporary unavailable after rooting using the pre- rooted ROM method, however, they'll work again by their own.
Method 2: by using TWRP recovery
1-Flash TWRP recovery on your phone, follow this Link to install TWRP on your phone, go for method 2.
2-Reboot to TWRP recovery.
3-Select Reboot.
4-Then select system.
5-TWRP will tell you that you aren't rooted, and it'll ask you if you want to root, slide the slider to root.
6-wait a little bit for it to root your phone.
7-Your phone will reboot.
8-Look for superSU app in your phone's app drawer, open it.
9-Select the playstore method, using the other option will make you start the rooting process from the beginning .
10-PlayStore will open showing superSU app page, update the app.
11-After updating the app, open it, it'll ask about updating the root binary, press continue.
12-Select the normal method.
13-Wait a little bit.
14-After it success, press reboot.
15-Check your root status using any root app.
16-Enjoy root access on your core prime, don't forget to press the thanks button :good:
help
Hi. I installed TWRP as instructed. Next I went to reboot, then system. my phone just rebooted, it didn't ask me about phone not being rooted! Help!
RizziM said:
Hi. I installed TWRP as instructed. Next I went to reboot, then system. my phone just rebooted, it didn't ask me about phone not being rooted! Help!
Click to expand...
Click to collapse
Try mounting system partition then rebooting.
Very good.
Rooting failed?
HI,
I love the details in your guide.
I installed TWRP and then went into reboot > system. I then swiped to install the binary, which it did. Once it rebooted, a notification appeared for SuperSU. I click it and it said SuperSU's su binary is not present, this is a fatal error!
I would appreciate any further help
DJames23 said:
HI,
I love the details in your guide.
I installed TWRP and then went into reboot > system. I then swiped to install the binary, which it did. Once it rebooted, a notification appeared for SuperSU. I click it and it said SuperSU's su binary is not present, this is a fatal error!
I would appreciate any further help
Click to expand...
Click to collapse
Did you update superSU app from playstore, and made it update it's root binary?
TWRP adds a basic root binary that enable the latest superSU app to install it's fully working root binary.
Hi, thanks for your quick reply.
I clicked notification which opened the supersu installer. It then said "SuperSU's su binary is not present, this is a fatal error!"
I then clicked OK and the application closed.
Reopening the app still gives the same message
DJames23 said:
Hi, thanks for your quick reply.
I clicked notification which opened the supersu installer. It then said "SuperSU's su binary is not present, this is a fatal error!"
I then clicked OK and the application closed.
Reopening the app still gives the same message
Click to expand...
Click to collapse
Update superSU manually from playstore, it should tell you if superSU binary isn't installed and might offer you an option to install it uaing TWRP, you can go for this method, or you can try repeating the post method again, as TWRP will ask you agian to root if the root binary wasn't installed. However don't worry, rooting using TWRP sometimes mistakenly miss somethings which cause to fail, but repeating the process will solve it..
Mr said:
Update superSU manually from playstore, it should tell you if superSU binary isn't installed and might offer you an option to install it uaing TWRP, you can go for this method, or you can try repeating the post method again, as TWRP will ask you agian to root if the root binary wasn't installed. However don't worry, rooting using TWRP sometimes mistakenly miss somethings which cause to fail, but repeating the process will solve it..
Click to expand...
Click to collapse
SuperSU updated automatically, I did try after it updated and I did try re-rooting from TWRP. It rebooted after I clicked system under reboot section. I saw a previous comment about mounting the system partition. I mounted it and reboot, but it was no longer mounted after rebooting (by clicking reboot then recovery in TWRP). I then tried mounting without rebooting, this produced the same outcome. The phone reboots normally into the os. I also tried using SuperSU to fully unroot. I then tried TWRP again (both without mounting system partition and with mounting system partition). The phone still reboot into the OS. I do believe that I could restart from the beginning if I was able to uninstall SuperSU, but I can't as it was installed as a system app by TWRP.
I appreciate your help and hope you can find a way to make this work.
DJames23 said:
SuperSU updated automatically, I did try after it updated and I did try re-rooting from TWRP. It rebooted after I clicked system under reboot section. I saw a previous comment about mounting the system partition. I mounted it and reboot, but it was no longer mounted after rebooting (by clicking reboot then recovery in TWRP). I then tried mounting without rebooting, this produced the same outcome. The phone reboots normally into the os. I also tried using SuperSU to fully unroot. I then tried TWRP again (both without mounting system partition and with mounting system partition). The phone still reboot into the OS. I do believe that I could restart from the beginning if I was able to uninstall SuperSU, but I can't as it was installed as a system app by TWRP.
I appreciate your help and hope you can find a way to make this work.
Click to expand...
Click to collapse
It's seems that you must flash superSU flashable Zip..you can find it on the web
hey i installed cyanogenmod 12.1, and my phone is now looking like it's not rooted anymore, what method should i use to root it again ?
crackpot360 said:
hey i installed cyanogenmod 12.1, and my phone is now looking like it's not rooted anymore, what method should i use to root it again ?
Click to expand...
Click to collapse
Hey crackpot360,
Open settings, scroll to the bottom and tap "About device", then tap build number until you unlock developer options.
Now open "Developer options" (above "About device") and scroll down to "root access". Change it to the "apps" setting.
Now, when an app requests superuser permissions it will ask you just as any other superuser app would. You can also choose to allow permanently.
When an app uses superuser it will show a "#" symbol in the Status bar.
To revoke permissions in the future, open the privacy settings, tap "Privacy guard", then tap the menu button at the top and select "Advanced". Then scroll all the way to the right to control the superuser access of apps.
I hope this helps
A thanks would be great
DJames23 said:
Hey crackpot360,
Open settings, scroll to the bottom and tap "About device", then tap build number until you unlock developer options.
Now open "Developer options" (above "About device") and scroll down to "root access". Change it to the "apps" setting.
Now, when an app requests superuser permissions it will ask you just as any other superuser app would. You can also choose to allow permanently.
When an app uses superuser it will show a "#" symbol in the Status bar.
To revoke permissions in the future, open the privacy settings, tap "Privacy guard", then tap the menu button at the top and select "Advanced". Then scroll all the way to the right to control the superuser access of apps.
I hope this helps
A thanks would be great
Click to expand...
Click to collapse
OK thanks for the reply first of all,
secondly, Ive already solved the problem by flashing supersu through recovery and updating binaries for it, but now my question is, should i follow through with your steps or just let it be? because everything as of right now is working fine.
Thanks again.
Is there any way to remove "Kernel is not seandroid enforcing" and "Recovery is not seandroid enforcing" on the top of the screen on boot splash? I have already installed TWRP and flashed Lineage on it. Phone boots and works just as expected, it is just that little detail that bugs me.
Hi guys please help me,my phone (sm g361h) cant see a PC (when i connect phone with PC phone cant connect only charge )sorry for bad English
---------- Post added at 07:29 PM ---------- Previous post was at 07:14 PM ----------
ZikRiAlloH said:
Hi guys please help me,my phone (sm g361h) cant see a PC (when i connect phone with PC phone cant connect only charge )sorry for bad English
Click to expand...
Click to collapse
This problem not from PC any different phone easy connect with my PC and I can i root this device without PC
Mr said:
Try mounting system partition then rebooting.
Click to expand...
Click to collapse
I have the same problem. Can you tell me how to mount my system partition?
I went to mount, then i checked system and clicked the internal storage. After that i went to system=>reboot but it just rebooted. It didn't asked me whether or not my phone is rooted!!
For those who want to root their Samsung Galaxy phone, I recommended to use the TWRP method. Hell man I tried the pre-rooted rom but it mess up my phone like it stop and stuck at samsung logo after rebooting for indefinite time. Luckily though I fix it just installing the Stock ROM. Then use the TWRP method to root my phone. Now it is rooted and updated and working fine. BTW, if the SuperSU asking for installation by Google Play Market or TWRP, use the TWRP because SuperSU is not available in store. It will download the binary of supersu and it will go to twrp recovery and just swipe it and it will install after that it will reboot. After that your phone will be rooted. Just download some root checker app in playstore to see if it is totally rooted. That's it, thanks.