my phone is SM-N915K model. When Iuse it in my country(Sri Lanka) some functions doesn't work properly. No 4G signals receiving though it is a LTE version. and some of USSD code of my subscriber not working also. So can i change the firmware to any international version? is it possible?
Amila Basura said:
my phone is SM-N915K model. When Iuse it in my country(Sri Lanka) some functions doesn't work properly. No 4G signals receiving though it is a LTE version. and some of USSD code of my subscriber not working also. So can i change the firmware to any international version? is it possible?
Click to expand...
Click to collapse
those functions are disabled. what are you trying to do ? there is a secret service menu on the phone from olleh which might be of some help.
319712358 and pasword id 774632. you can select only lte in the network mode etc
anizh said:
those functions are disabled. what are you trying to do ? there is a secret service menu on the phone from olleh which might be of some help.
319712358 and pasword id 774632. you can select only lte in the network mode etc
Click to expand...
Click to collapse
I hv choose LTE option in mobile network place. But the phone receiving only 3G n 2G signalas and we have USSD codes here to check the mobile balance and data balances like wise. Also olleh cs is working in korean fonts. How to work with given is n password by u. Thanx for ur concern.
Related
I bought an Unlocked Canadian S6 recently, and it just won't let me connect to the LTE network.
Model Numer : SM-G920W8
Android Version : 5.0.2
Baseband : G920W8VLU1AOCG
Connecting to the LTE is not even an option. When I go in the Network Options, I get the choice between :
-WDCMA/GSM (auto connect)
- WDCMA only
- GSM only
I know for a fact that I am in the coverage zone, so no need to ask that silly question
I've tried different SIM cards, played in the options a bit, and factory reset the phone about 5 times now, yet nothing seems to work.
Also, when I try to do the update, it just reboots and gives me an Android logo and a failed Icon
I've only seen one other post like this from a carrier's support website, but no solutions were found.
**Update : For a reason, after a recovery, it will connect to the LTE for a bit or until next boot, then go back to what it is now.
First question, who did you buy the phone from? Second, Is it second hand? By default, Wind mobile does not allow the LTE option to be displayed in system settings as they as a carrier don't have LTE. It is blocked by the CSC setting for the carrier. As for other carriers It should leave you the option to connect in settings where you say it is not. If it is a Wind phone, You would need to change the CSC to enable the LTE selection. There is a method to force LTE even without option in settings, but I think it is removed in the latest firmware. Try dialing *#2263# in the dialer. It may bring you to menu that will allow you to select LTE. This is not a permanent method though as it will need to be done every boot. The other way, (If you are in fact a Wind/Mobilicity phone) is to enter dialer and enter *#272*IMEI# with IMEI being your devices unique code. If at all possible, take a full nand and Titanium Backup before doing this and be sure to transfer everything off the phone to a PC. This method wipes everything and I mean everything off the phone buy is a surefire way to enable LTE.
Yes, it was second hand. I didn't ask who was his carrier simply because it was unlocked.
I'll try it tomorrow, thanks for the information
Here is the menu you will see when you type the *#272*imei# code into your dialer. The codes are the carrier names. Mine which is GLW is Wind, BMC is Bell, RWC is Rogers, etc.
Maybe there is no LTE in your area...
roydok said:
Maybe there is no LTE in your area...
Click to expand...
Click to collapse
It would still be visible in the Settings/Mobile Networks/Network Mode menu which it is not. His problem is more than that.
BCSC said:
First question, who did you buy the phone from? Second, Is it second hand? By default, Wind mobile does not allow the LTE option to be displayed in system settings as they as a carrier don't have LTE. It is blocked by the CSC setting for the carrier. As for other carriers It should leave you the option to connect in settings where you say it is not. If it is a Wind phone, You would need to change the CSC to enable the LTE selection. There is a method to force LTE even without option in settings, but I think it is removed in the latest firmware. Try dialing *#2263# in the dialer. It may bring you to menu that will allow you to select LTE. This is not a permanent method though as it will need to be done every boot. The other way, (If you are in fact a Wind/Mobilicity phone) is to enter dialer and enter *#272*IMEI# with IMEI being your devices unique code. If at all possible, take a full nand and Titanium Backup before doing this and be sure to transfer everything off the phone to a PC. This method wipes everything and I mean everything off the phone buy is a surefire way to enable LTE.
Click to expand...
Click to collapse
Sweet! It works :good: Thanks man
Now, would you have any ideas on why the update won't work? I didn't get much into it yet, but I will soon.
I'm not sure why it wouldn't update, but now that you have changed the CSC you can download the update and flash with Odin. Pick your carrier and go to town. The guy running the following thread runs his own firmware host. He's got amazing DL speeds. Usually takes me 6 or so minutes to do the 1.6gb file. http://forum.xda-developers.com/showthread.php?t=3086387
I'm having the same issue.
Scurbs said:
Sweet! It works :good: Thanks man
Now, would you have any ideas on why the update won't work? I didn't get much into it yet, but I will soon.
Click to expand...
Click to collapse
Connected with someone selling a G920W8 version. LTE is disabled and the codes aren't working. Can you reaffirm which unlock code worked for you? I'm on Fido, what LTE network are you using?
hi BCSC
Thanks for the details. I searched complete net and read all articles but nothing set me up with the proper thing. i read your solution i dialled *#2263# and all i got is service mode and in that i went to band selection , LTE and the all ....... Yes and its showing LTE in mobile data. THanks so much.
But now another issue, network is showing perfect but no outgoing and incoming calls.
in incoming its showing busy and on outgoing its not connecting to another phone.
And, Lte is not showing in mobile networks, There only 3 options still are showing.
Mine is same Wind S6 but i had to use in India.
Let Me know
Thanks once again
Cheeerzzzzz
Varun
Picking LTE from the service mode will note make it visible from the settings menu. Its more of a workarpund instead of a way of permanently enabling it. As for the issue of no out/in calls, my best guess is that it could be due to which LTE bands are being used or are available in India. Unfortunatly I have no way to test that option. I only was successful in getting the Wind LTE option on Canadian carriers.
Sent from my SM-G935W8 using XDA-Developers mobile app
I have a note 5 sm n920p. After i ugrade to mm. The mobile data toggle was disappered.and i cant access 4g lte data only on 3g data. I ve senn that you need a mls code to change the settings and have access to modify options. Does anybody how to activate my phone to use it? I live in europe i dont know how thing works for sprint
##data# from the dialer then click edit then LTE. Check lte enabled to see if its checked and change your lte bands if needed. Or instead of clicking on lte scroll down to more then click HDR/1x selection then set it from there
Sent from my SM-N920P using XDA-Developers mobile app
bonebeatz1234 said:
##data# from the dialer then click edit then LTE. Check lte enabled to see if its checked and change your lte bands if needed. Or instead of clicking on lte scroll down to more then click HDR/1x selection then set it from there
Click to expand...
Click to collapse
Yes i cant access to edit because i dont have the msl code. i chatted with the sprint support but that asked my data i dont have.. any way fmto access edit section to ##3282# ?
Flash the Moar rom and you can access it without a code that's how i change mines
Sent from my SM-N920P using XDA-Developers mobile app
endrimato said:
I have a note 5 sm n920p. After i ugrade to mm. The mobile data toggle was disappered.and i cant access 4g lte data only on 3g data. I ve senn that you need a mls code to change the settings and have access to modify options. Does anybody how to activate my phone to use it? I live in europe i dont know how thing works for sprint
Click to expand...
Click to collapse
Endri, Was your phone's original firmware 5.1.1 and with the logos of Andoid-Al-Yemen...?
SM-920P does not have the necessary 4G Bands to use in Albania. I mean, the modem is capable but I DO NOT recommend trying to engineer the Qualcomm processor... By the way look for a sticker on the upper bezel of your phone if it has any "QUALCOMM 4G" adhesive sticker...
Anyway, don't mess with the settings on the data or service menu or you will sim lock your phone back to sprint. If you are brave enough and want to mess with the settings, my advice is: Do not touch anything that has "NV" written to it! Probably you will re-lock you phone back to Sprint as this model's NV golden backup locks it back.
Nese pastaj padashje e ke bllokuar telefonin me shkruaj te te them si ta zhbllokosh.
Msl code required for hotspot edit
Dear XDA,
Please provide the MSL code for hotspot and if you better guide then tell me. Thanks
Hello to all,
I got the latest update ( G930FXXU1BPHJ ), a week or so again, on my S7 (UK version, carrier EE) and after the update i got this icon (attached) ...
Do you know what is it for ?
Thanks.
VoLTE is active.
Voice Over LTE
thakrage said:
VoLTE is active.
Voice Over LTE
Click to expand...
Click to collapse
Thanks.
Is there a way to deactivate it ?
What carrier are you on? My guess is to disable advanced calling (what it's called for Verizon) in your mobile plan
Hi,
I have a problem with my Samsung Galaxy S8+ (G955F) model. The phone shows Carrier ID: VOD (I guess means Vodafone/Product Code) in Odin Mode in Red Color, the phone is unlocked working on one carrier in all LTE/3G/2G networks but on other carrier it only works in LTE/3G modes and when i switch it to 2G only it doesn't register to a network on this second carrier and as long as i Turn it Back to LTE/3G/2G it registers but to only LTE or 3G.
I believe it is some kind of a partial carrier lock where the phone is locked on some carriers in different network modes.
Its not registering to 2G on Telenor Pakistan Network while it registers on LTE/3G/2G perfectly fine on Zong CMPak.
The phone doesnt require any kind of carrier unlock code or something.
Is there any way to work this around??? I have installed UK BTU Firmware from Sammobile, already debranded and works perfectly fine just not working in 2G mode on this one carrier.
Is there any way to change this product code or something while being on official Stock Firmware?
My Current Service Provider Version is: PAK/PAK/VOD
I want to change this to PAK/PAK/PAK and remove that Carrier ID: VOD thing from the odin mode display.
Please help!!!!!
hi did you find a solution??
Nopes. I just had to change my phone after all the things I tried, It won't go so I had no other option.
I have a SM-G955U that's GSM unlocked. It was originally an Xfinity phone, but I'm now using it on mertopcs. Mero supports active data while talking on the phone. But my S8+ disables my data while making a call. I do not have root, is there a way to keep my data while talking on the phone?
Try this settings/ connections/ mobile networks/ VoLTE Calls. I think that's the option you're looking for
That option doesn't appear when I go there...
I've checked through the phone app and the settings menu, nothing like that appears anywhere.
>
jthompson553 said:
I've checked through the phone app and the settings menu, nothing like that appears anywhere.
Click to expand...
Click to collapse
I think this option depends on the carrier itself you're using some carriers doesn't support vollte so this option will not be enabled by default. My carrier supports vollte.
Next to 4G or LTE icon vollte will appear like the picture below
https://mega.nz/#!zZBAAaaA!UJM62RS1-M0NwU7Tu1X_wpXiGKf3QXWQlSf3OB41qe0
The original carrier for this phone did not support vol LTE by the carrier I'm using now does support it. It was originally Xfinity and now I'm with MetroPCS.
jthompson553 said:
The original carrier for this phone did not support vol LTE by the carrier I'm using now does support it. It was originally Xfinity and now I'm with MetroPCS.
Click to expand...
Click to collapse
Maybe flash the MetroPCS firmware or unlocked firmware.
You don't need use VoLTE to talk and browse at the same time, if your carrier doesn't support VoLTE your cell phone will perform a CS Fall Back to UMTS and then (if your carrier support MULTI RAB) your cell phone will make MULTI RAB, one RAB CS to voice and one RAB PS to data. The problem is when you are using 2 sim cards, if you make a call from one sim card and the data came from the other sim card, the Galaxy S8+ will block the other sim card in a call.
So to call and use data at the same time you will need VoLTE in LTE or Multi RAB in UMTS but must be the same sim card.