HI! Everybody... Can you help me ?
story : i wanna root my phone but first wanna install TWRP with SPFlash Tool , my firmware is v1.5.0 , when i am follow the procedure it show "PMT changed from the rom"
so i search how to fix that , after i know it.. , 1. format Auto 2.install stock ROM 1.4.9 3. install TWRP , when i boot the phone it shows BLANK WHITE SCREEN.
if you know to fix it please HELP ME...
I NEED YOUR HELP !:crying:
Related
Dear Sir,
When i started to install Revolution ICS HD in to my Sony Xperia Arc S
As per Instruction i done all
-------------------------------------------------------------------------------------------------------------
Reboot into Clockwordmod Recovery-----yes
•Factory Reset--done
•Wipe Cache Partition---done
•Advanced>Wipe Dalvik Cache--done
•Mounts and storage > Format /system--done
•Install zip from sdcard> Choose zip from sdcard> Revolution_ics_hd_part 1.zip--done
•Follow the Instructions in Aroma Installer--done
-=----------------------------------------------------------------------------------------------------------------
i clicked install..........after the completion of Aroma installer the system automatically Rebooted..
But not yet booted
after the logo Sony...it is going to blink black screen.....
i tried lot of times
it is not going to Boot...
Blinking Sony....itself
plz give me any idea......to how to restart my phone.....!!!!!!!
i found below instruction from the same page
""
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
""
So i downlod patch file from my Pc
.........................................................
Now what i want to do.,........
my xperia arc s is ...now blinking Sony.........logo only....
not booting
plz give me some idea...
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
raeeskk said:
Dear Sir,
When i started to install Revolution ICS HD in to my Sony Xperia Arc S
As per Instruction i done all
-------------------------------------------------------------------------------------------------------------
Reboot into Clockwordmod Recovery-----yes
•Factory Reset--done
•Wipe Cache Partition---done
•Advanced>Wipe Dalvik Cache--done
•Mounts and storage > Format /system--done
•Install zip from sdcard> Choose zip from sdcard> Revolution_ics_hd_part 1.zip--done
•Follow the Instructions in Aroma Installer--done
-=----------------------------------------------------------------------------------------------------------------
i clicked install..........after the completion of Aroma installer the system automatically Rebooted..
But not yet booted
after the logo Sony...it is going to blink black screen.....
i tried lot of times
it is not going to Boot...
Blinking Sony....itself
plz give me any idea......to how to restart my phone.....!!!!!!!
i found below instruction from the same page
""
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
""
So i downlod patch file from my Pc
.........................................................
Now what i want to do.,........
my xperia arc s is ...now blinking Sony.........logo only....
not booting
plz give me some idea...
ARC/S PATCH ONLY FLASH THIS IF YOU HAVE A BLACK SCREEN ISSUE AFTER U FLASHED PART 1
Flash part 1 flash the patch reboot ! then follow rest of the instructions! pls report your results
Click to expand...
Click to collapse
your phone has gone into bootloop i.e. it is soft bricked
search for an unbrick tutorial in ur device's forum!!
you should make a nandroid backup through clockworkmod before flashing a rom!
Not yet solved the booting problem...my xperia arc s
js2892 said:
your phone has gone into bootloop i.e. it is soft bricked
search for an unbrick tutorial in ur device's forum!!
you should make a nandroid backup through clockworkmod before flashing a rom!
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------
Sir,
Yesterday i tried some unbrick tutorial in this website,
finally i got one Xperia_2011_FreeXperia_ALL.ftf ..
so flash this firmware using flashing tool...its successul
But then also not yet started my phone..
still blinkung sony logo...and black screen.
then i tried SUS (Sony Update Service Setup)
But it explain me after the checking that....."" you have latest software installed ""
So plz anyone give me Idea.
If i give to service centre ..they will charge payment...becoz sometimes its warranty is voided..
also it will take 1 week..
So,,,plz help me
there should be an option at SEUS for repair.
Try PC companion.
martirio3000 said:
there should be an option at SEUS for repair.
Try PC companion.
Click to expand...
Click to collapse
i tried again using Pc companion
but it tolds that you have the latest software installed
Hello, I have a Vodafone Smart 2 (Alcatel v860). I did backup with nanodroid and after that I tried to install KitKat Smart Rom from Alberto 96. After that I prefer to back in original ROM. And for that I format the device (system.img, boot.img, custopack.img etc) and installed those from backup. I was suprised when I tried to turn on device , stuck in the Android logo. I can't open the device in Recorvery mode and I can't install recorvery.img from PC 'cuz the PC can' open the device. Can you help me? A detailed help please...
hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed. pls help this frnd.
i tried to flash with sp flash tool with other phones stock rom having same processor mt6580. (format all + download)
first it was installed successfully but tablet is not opening.
so again tried download only but it shows as brom error s_ft_enable_dram_fail (0xfc0).
please help me friends
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
pls help me
Hi !
I see that you posted again here https://forum.xda-developers.com/an...rd-bricked-t3548246/post70826170#post70826170
Let`s keep everything in one place
Good luck !
thread closed
Guyz a little help
I have Samsung gt i8552 i was decide to install custom recovery mode after i rooted it.
I saw some posts in xda about how to install custom recovery ziped file and follow the instructions well as can but my device can't boot into download mode i tried many ways and instructions i have been given still can't boot into download mode but decide to try install custom recovery by myself manually i downloaded the custom recovery ziped file and app called flashfy i use that app to find a ziped fill and install and it shows me successful reboow i did it and northing change i thange the name of custom recovery.zip to (customrecovery.img) i stall it as boot image during installation The device reboot that was the last time it boot on
Please can any one help how to fix it coz the device cant boot on it vibrate wen u presa power button it show blank screen and it reboot it self over and over untill u remove the battery i need help
Hello Guys,I am facing problem in installing Stock Rom for my Xtouch X906 Tablet.I have read the tutorials for it in internet and I am able to get its firmware.I have applied the given instruction to install the Stock Firmware successfully. But after installing it my tablet is unable to boot.It shows white light screen and then goes to dark screen.It does not go to boot.Even it does not go to recovery mode as it did not go to recovery mode before doing this all as its software got corrupted and its touch started behaving incorrectly that why i decided to install stock factory rom in it.
Now please help me how to make it to boot to android os? or if anyone have link to its stock rom please provide it also with instructions.
Thank You