m8_wlv pvt ship s-on and root 5.0 - Verizon HTC One (M8)

hello I need your help, I want to know if you can make root and s-off, failed to do so and tried and failed to perform I leave my data
* Factory Restore
* It was forced from recoveri corresponding wips
* Will unlock the bootloader but attempt failed
* Will attempt to load a ruu, but it was not right, I guess it must be because of bootloader
* Multiple cameras were installed in the Play Store, but it did not work
* Current camera is not worse I run uninstall
data :
ootloader) Version: 0.5
(Bootloader) version-bootloader: 3.19.0.0000
(Bootloader) version-baseband: 1.12.20.1211
(Bootloader) version-CPLD: None
(Bootloader) version-microP: None
(Bootloader) version-main: 4.17.605.9
(Bootloader) version-misc: PVT SHIP S-ON
(Bootloader) serialno:
(Bootloader) IMEI:
(Bootloader) imei2: Not Support
(Bootloader) meid:
(Bootloader) product: m8_wlv
(Bootloader) platform: hTCBmsm8974
(Bootloader) modelid: 0P6B20000
(Bootloader) cidnum: VZW__001
(Bootloader) battery-status: good
(Bootloader) battery-voltage: 0V
(Bootloader) partition-layout: Generic
(Bootloader) security: on
(Bootloader) build-mode: SHIP
(Bootloader) boot-mode: FASTBOOT
(Bootloader) commitno-bootloader: 66da6304
(Bootloader) hbootpreupdate 11
(Bootloader) gencheckpt: 0
all: Done!
finished. Total time: 0.015s
fastboot getvar version-main
fastboot oem readcid
currently down to the OS version: 4.17.605.5, that sunshine recognize me but asked me not temporary root

jowysosa said:
hello I need your help, I want to know if you can make root and s-off, failed to do so and tried and failed to perform I leave my data
* Factory Restore
* It was forced from recoveri corresponding wips
* Will unlock the bootloader but attempt failed
* Will attempt to load a ruu, but it was not right, I guess it must be because of bootloader
* Multiple cameras were installed in the Play Store, but it did not work
* Current camera is not worse I run uninstall
currently down to the OS version: 4.17.605.5, that sunshine recognize me but asked me not temporary root
Click to expand...
Click to collapse
Highly suggest editing this and hiding seriel number and other things like IMEI..

jowysosa said:
hello I need your help, I want to know if you can make root and s-off, failed to do so and tried and failed to perform I leave my data
* Factory Restore
* It was forced from recoveri corresponding wips
* Will unlock the bootloader but attempt failed
* Will attempt to load a ruu, but it was not right, I guess it must be because of bootloader
* Multiple cameras were installed in the Play Store, but it did not work
* Current camera is not worse I run uninstall
data :
ootloader) Version: 0.5
(Bootloader) version-bootloader: 3.19.0.0000
(Bootloader) version-baseband: 1.12.20.1211
(Bootloader) version-CPLD: None
(Bootloader) version-microP: None
(Bootloader) version-main: 4.17.605.9
(Bootloader) version-misc: PVT SHIP S-ON
(Bootloader) serialno:
(Bootloader) IMEI:
(Bootloader) imei2: Not Support
(Bootloader) meid:
(Bootloader) product: m8_wlv
(Bootloader) platform: hTCBmsm8974
(Bootloader) modelid: 0P6B20000
(Bootloader) cidnum: VZW__001
(Bootloader) battery-status: good
(Bootloader) battery-voltage: 0V
(Bootloader) partition-layout: Generic
(Bootloader) security: on
(Bootloader) build-mode: SHIP
(Bootloader) boot-mode: FASTBOOT
(Bootloader) commitno-bootloader: 66da6304
(Bootloader) hbootpreupdate 11
(Bootloader) gencheckpt: 0
all: Done!
finished. Total time: 0.015s
fastboot getvar version-main
fastboot oem readcid
currently down to the OS version: 4.17.605.5, that sunshine recognize me but asked me not temporary root
Click to expand...
Click to collapse
Start here to downgrade to then get s-off
http://forum.xda-developers.com/showthread.php?t=3202237
Sent from my Nexus 6 using Tapatalk

dottat said:
Start here to downgrade to then get s-off
http://forum.xda-developers.com/showthread.php?t=3202237
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I did this and I am already in that version that you share me , the application asks me access ROOT, temporary for my htc m8 Lolipop5.0

jowysosa said:
I did this and I am already in that version that you share me , the application asks me access ROOT, temporary for my htc m8 Lolipop5.0
Click to expand...
Click to collapse
Yes....so like has been explained and repeated countless times both in this section and in the sunshine thread you use kingroot and then sunshine to s-off.
Sent from my Nexus 6 using Tapatalk

dottat said:
Start here to downgrade to then get s-off
http://forum.xda-developers.com/showthread.php?t=3202237
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
dottat said:
Yes....so like has been explained and repeated countless times both in this section and in the sunshine thread you use kingroot and then sunshine to s-off.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Hello how will you tell them that I could unlock and'm s-off, I have root already tried several ROMs, I still can not decide which to use, the last query is that rom and kernel recommended as the moemnto I am with ski dragon and looks But in case perop consulted if there alaguna better and tambine change the super cid cid, of course thank you very much and I thank you for everything

Related

[Q] enabling s-off on HTC One X

I have been messing with my HTC One X trying to load a custom ROM without much success. I did manage to brick the phone upgrading the HBOOT version. This was done over a year ago and i've stated messing with it again. So far I have managed to flash a custom recovery, flash the boot.img and zip for the Maximus HD ROM. I can now boot the phone into Android again, however it will not recognise a SIM card. Can anyone help me get back to a stock or working ROM
I suspect i need to be able to enable S-OFF and/or change the CID.
I have tried the 'Moonshine' method to switch S-OFF however this just fails with an error
I have tried the fastboot oem writecid 11111111 and this fails with a FAILED (status read failed (Too many links)) message
The information about the phone is:
C:\android-adb>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.206.27
(bootloader) serialno: HT24HW112160
(bootloader) imei: 353043050287419
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3915mV
(bootloader) devpower: 68
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.826s
Any help greatly appreciated.
M

ONE XL AT&T(Evita) How to add super CID or unlock forcefully or alternate methods?

ONE XL AT&T(Evita) How to add super CID or unlock forcefully or alternate methods?
After trying CM11-12, I ended up in an android.phone stopped working "loop"(which happened to every rom I tested in different flavors )... To make story short, I have the "brilliant" idea to flash a RUU... and I ended up relocking. Seems I missed that I had edit(downgrade?) my "version-main" or something, because when trying to flash the ruu it said that my version is lower than mine or something. I'm also S-on, although I think I can access SU # with ADB(although it stops working sometimes)
Current status of phone:
can only go to fastboot mode
tampered
relocked
S-ON
Previous Unlock_code.bin I had is not working
Can not get new Unlock_code.bin because I fastboot is unable to write 11111111 or w/e
tried to hex /dev/block/mmcblk0p4 but it's not in that directory .. I did cd/ls to it and really isn't there
tried running ruu*.exe from windows but it says that my phone charge is less than 30% (I'm sure it's got more though...)
tried flashing the rom inside this but failed due version --RUU_EVITA_UL_ICS_40_S_Cingular_US_2.20.502.7_Radio_0.19as.32.09.11_2_10.105.32.25L_release_271865_signed.exe
tried flashing the rom inside this but it failed due being "image too large" (700+mb)
--HTC_One_X_RUU_5.18.502.1_2.exe
tried using mfastboot.exe but still says image too large
These are my fastboot vars
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.24p.32.09.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT28JW303396
(bootloader) imei: 359691046275965
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4053mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
What can I do to fix my device? At this point I don't mind which rom as long as I can take calls...
--Edit: Right now my main objective would be getting super CID/unlock and from there I would have more options .... So please if anyone have recomendations to get that, given my phone's condition, it will be greatly appreciated

HTC Sensation Pyramid -- Boot Loop -- S-On -- Replaced Board

Hi Guyz,
I am really stuck and I have tried every possible solution online but unable to solve it. I have HTC Sensation Pyramid stuck in boot loop. Although I am able to boot into bootloader but unable to do anything else. Its board was replaced so default HTC Dev Unlock don't work. Every other solution require to boot into the ROM and enable debugging for ADB like JuopunutBear S-OFF and Rumrunner.
Here are the details from fastoot getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.45.401.3
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4117mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Any help will be highly appreciated, Thanks
Aero.
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Gatosbil said:
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Click to expand...
Click to collapse
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Aerocaria said:
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Click to expand...
Click to collapse
i will send the juopuntubear files(windows) for S-OFF via pm
but know this i don't think it will work on win10

S-ON LOCKED help me!

Hi a friend of me, gives me his smartphone becase He can't access it. The smartphone blocks at bootloader
It's locked and in S-ON mode. How can I do?
This are information by fastboot
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.21.0000
(bootloader) version-baseband: 1.18.40a.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.901.108
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *
(bootloader) imei: *
(bootloader) meid:
(bootloader) product: k2_u
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8013000
(bootloader) cidnum: TIM__401
(bootloader) battery-status: good
(bootloader) battery-voltage: 3982mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2bb255c2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks
Unlock it, with htcdev.com, flash twrp recovery and flash a rom.
You will loose all the data.
I try to unlock it with htcdev, it seams to be ok but when I reboot the label lock still appears
old.splatterhand said:
Unlock it, with htcdev.com, flash twrp recovery and flash a rom.
You will loose all the data.
Click to expand...
Click to collapse
marcosvega said:
I try to unlock it with htcdev, it seams to be ok but when I reboot the label lock still appears
Click to expand...
Click to collapse
Not sure, where this problem comes from.
But it seems, there is not much you can do at this point.
If you have the official OverTheAir update or official firmware.zip from the update, you can try to flash the firmware again and see, if this does a change to the bootloader unlock.

Setting s-off

Sorry if I am posting this in the incorrect forum. This is my first posting,
Anyway, I have a T-Mobile HTC One S ville and have been trying to set s-off so I can install the Lineage ROM. I rooted and unlocked the phone and installed the CM-12.1 Rom without any problems. Unfortunately, when I tried to run the Sunshine app, I discovered (too late) that the phone must be running its stock rom or near-stock rom. After many attempts to find a stock rom, I successfully installed MaximusHD 10.0.0, but am unable to install the firmware, so I am unable to obtain a wifi connection due to authentication problems. I then tethered the phone to my laptop and was able to gain internet access, and the Sunshine app ran successfully for the first set of tests. When Sunshine attempted to run the next set of tests, it disconnected the tether. So I am stuck on how to proceed.
Here are the getvar readings:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA2A4W401369
(bootloader) imei: 352636053246893
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4197mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any help will be greatly appreciated.
Thanks,
Greg
You're in luck my friend, I'm in the same boat as you trying to get this thing running good to play some old Android games.
https://androidfilehost.com/?fid=95832962473394309
Let me know if you get S-Off, there seems to be carrier resrictions on our TMO devices. I've thought about extracting the ROM.zip of a Global RUU, and flashing it through fastboot manually, but don't want to brick my phone haha.

Categories

Resources